@@RogerFriberg hmm I wonder why. I ended up disassembling the entire thing. I wrapped the spring in some black tape and reinserted it. Now I don’t hear any rattling
Users should be aware that if you install this kit, you will have a tough time disassembling it. The 3d printed plastic is so tightly fit that when you try to take it apart, you may end up destroying it. That said , plan on keeping your pistol permanently installed in this kit. Maybe one day, when you feel you had enough, then you can take it out whereby effectively destroying this kit, or at least some parts of it would be rendered useless there after.
One need to realize this is printed plastic, absolutely. It's not Metal and can be handled any other way, but I have not had that amount of problems you describe. With appropriate amount of awareness this is no problem disassembling. 🙂 In my case, at least, there is no risk of "effectively destroying" this kit when taking it back apart. My kit is even up for sale now, no damage. 👍
@@franciscojavieramezcuafern1209 Be aware though. I had no such problem that it is destroyed just because I took it off. It takes some serious mishandling to destroy it, but yes it is pricey. 😐
@@RogerFriberg not only that, if you are used to clean/grease to take care of your gbb pistol after play with It...this could.ve problematic. Thanks for the vude
@@franciscojavieramezcuafern1209 THERE is a VERY good (anti)point for this kit, yes. This would mean needing to dismantle this kit to clean the pistol, very true! 👍
I'm sorry for a tad delayed answer, I Honestly thought I had answered this, but seems like I just planned too, but didn't. As for your question, I see no problems what so ever in tapping this and running HPA, since there is no interference in the magwell! 👍
Great question! Unfortunately, I don't think it will fit the barrel of the C, since this kit requires the original outer barrel to mount a piece on. I guess it wouldnt be much harder than to just but a spare Barrel or print one. Then it's finns work!
YES, but only the "mini/micro" sized tracers. However, those are almost the normal size nowadays. Please look here to refer to what I mean. ruclips.net/video/iSd_-tBZB2E/видео.htmlsi=500711t9Cmy2eqRm&t=857
When your stock is extended can you hear the spring slightly rattle?
Mine rattles slightly when extended but doesn’t when stock is closed
I'll check this afternoon and get back to you!
Ok, I have checked now. I cannot hear any springs rattle when my stock is fully extended.
@@RogerFriberg hmm I wonder why. I ended up disassembling the entire thing. I wrapped the spring in some black tape and reinserted it. Now I don’t hear any rattling
Users should be aware that if you install this kit, you will have a tough time disassembling it. The 3d printed plastic is so tightly fit that when you try to take it apart, you may end up destroying it. That said , plan on keeping your pistol permanently installed in this kit. Maybe one day, when you feel you had enough, then you can take it out whereby effectively destroying this kit, or at least some parts of it would be rendered useless there after.
One need to realize this is printed plastic, absolutely. It's not Metal and can be handled any other way, but I have not had that amount of problems you describe.
With appropriate amount of awareness this is no problem disassembling. 🙂
In my case, at least, there is no risk of "effectively destroying" this kit when taking it back apart.
My kit is even up for sale now, no damage. 👍
Taking in account is 190 euro..if this is true is not worth It. Thanks for advice.
@@franciscojavieramezcuafern1209 Be aware though. I had no such problem that it is destroyed just because I took it off. It takes some serious mishandling to destroy it, but yes it is pricey. 😐
@@RogerFriberg not only that, if you are used to clean/grease to take care of your gbb pistol after play with It...this could.ve problematic. Thanks for the vude
@@franciscojavieramezcuafern1209 THERE is a VERY good (anti)point for this kit, yes. This would mean needing to dismantle this kit to clean the pistol, very true! 👍
Can you HPA the aap 01 while using this kit?
I'm sorry for a tad delayed answer, I Honestly thought I had answered this, but seems like I just planned too, but didn't.
As for your question, I see no problems what so ever in tapping this and running HPA, since there is no interference in the magwell! 👍
Love it 🔥🔥
Thank you, thank you!"
Does this work for AAP01 or can it work for AAP01C?
Great question! Unfortunately, I don't think it will fit the barrel of the C, since this kit requires the original outer barrel to mount a piece on. I guess it wouldnt be much harder than to just but a spare Barrel or print one. Then it's finns work!
@@RogerFriberg okay thank you, also do you know any kits that could work with the AAP01-C?
@@Anonymous-ud5qe Not from the big brands that I'm aware of. But look at the 3D printing community, I bet they have?
Is there any place for tracer unit?
YES, but only the "mini/micro" sized tracers. However, those are almost the normal size nowadays. Please look here to refer to what I mean. ruclips.net/video/iSd_-tBZB2E/видео.htmlsi=500711t9Cmy2eqRm&t=857
@@RogerFriberg ok, thanks man