Amazing how slight play in the mechanism and placement of the servo can create an ever so slight delay in the motion. Amazing look into creating all of this and I am enthralled by this series. Can't wait to see more of this progress.
They make much smaller servos and Arduino boards which are perfect for what you are doing, however I know you will make this work and it's going to be fantastic. Just something to think about for next time. Now that this bug has bit you there's no going back. You're gonna be hooked. There are so many possibilities and it really brings a model to life. Can't wait to see how you tackle getting all this in that car. It's going to be epic. Oh and very nice touch with the lighting (the red LED seen in some shots). That's going to look so spot on when done.
Pas facile de tout faire entrer dans si peu de place ! Il faut avoir votre immense patience pour réussir ce challenge ! Je suis impatient de voir la suite ! A bientôt.
Hi Kenji-San, it‘s amazing how you fixed the mechanic construction for the headlights, very realistic move, it would be great if you could fix some lights in the headlights( like in the Nissan you did 1 or 2 years ago, Greets from Berlin
Thank you very much for these videos! It's been so many years since I last built it myself (too much work and stress).. It's great, through your videos, to return to the state of mind you get from building miniature models 👍
Hi Kenji, looking very nice, I wonder if you will put the rest of the electronics in a display base, or modify the bread boards to fit in the car. It will be exciting to see what you do. I look forward to it. Thank you Kenji, and take care.
Back in 1990 I used a HO scale train track switching mechanism to open my 1/16 scale Lamborghini headlights . It worked perfectly . Then I added my own switch that was basically an on/off /on switch in place of the gear shifter . The original switch was a momentary on/ off/ on switch . Long story short it was an electromagnetic Device and it stayed energized . I turned on the lights and about 30 seconds later smoke started rolling out of the “ boot”. I almost burnt the house down . Lol
Sensei I have been absent from your channel for some time, but i see you have been expanding your craft, your art is unbeatable. Hope you have been well- Mike.
Fantastic, but to be scale accurate, one of them should only open halfway, like the car is drunk. And sometimes, the other one just shouldn't move at all. It's a Lotus thing...
Great work! You can probably use a arduino nano instead of the uno, its much smaller, maybe not fit in the car but almost, and its also cheap. Thanks for your videos!
Helas I appreciate your skill but I think static model must remain static model, I'm not interested in RC nor interested in bizarre hybrids like a single movement of lights, a useless addition, but never mind I don't want to criticize your nice game.
![#219 Lotus907engine [Builder's view] Fujimi1/24 Lotus Esprit under construction / model car building](http://i.ytimg.com/vi/8Q6Ql0lf-H8/mqdefault.jpg)
![#219 Lotus907engine [Builder's view] Fujimi1/24 Lotus Esprit under construction / model car building](/img/tr.png)
![#246 [Builder's view] Fujimi1/24 Lotus Esprit under construction / Scale model building](/img/1.gif)
Amazing how slight play in the mechanism and placement of the servo can create an ever so slight delay in the motion. Amazing look into creating all of this and I am enthralled by this series. Can't wait to see more of this progress.
Thank you very much!!
Very nice result, Kenji. If one is lacking space for a servo, this can also be accomplished with an actuator made from Nitinol "muscle wire".
what's this? Never seen before! thank you!✨
this unconventional "engine - muscle wire" could not be used for this scenario. Or do you have working example?
I love your videos. You do great work. I will love to see your a video of your hobby room.
Thank you!!
They make much smaller servos and Arduino boards which are perfect for what you are doing, however I know you will make this work and it's going to be fantastic. Just something to think about for next time. Now that this bug has bit you there's no going back. You're gonna be hooked. There are so many possibilities and it really brings a model to life. Can't wait to see how you tackle getting all this in that car. It's going to be epic. Oh and very nice touch with the lighting (the red LED seen in some shots). That's going to look so spot on when done.
Thank you.
When I checked the actual car, I found that the timing of the light lighting was wrong, so I will correct it.
I have owned several cars with flip-up headlights and they never worked as smoothly and as synchronized as yours.
Well done
Thank you, I envy you.
Pas facile de tout faire entrer dans si peu de place !
Il faut avoir votre immense patience pour réussir ce challenge !
Je suis impatient de voir la suite !
A bientôt.
Merci pour vos commentaires.
Mettez la machine autre que le moteur dans la base.😃
Hi Kenji-San, it‘s amazing how you fixed the mechanic construction for the headlights, very realistic move, it would be great if you could fix some lights in the headlights( like in the Nissan you did 1 or 2 years ago, Greets from Berlin
Thank you. The lights will come on. Please watch the video again👍
素晴らしい！図解さんくらいしかリトラクタブルライトを電動で再現出来る人はいないと思って作って下さいとお願いしていましたが遂にやってくれて感動しました！
まだまだ分からないことばっかりなんですが、とりあえず。
Thank you very much for these videos!
It's been so many years since I last built it myself (too much work and stress)..
It's great, through your videos, to return to the state of mind you get from building miniature models 👍
Thank you, I appreciate your comment.👍
Amazing work from an amazingly talented man. Well done. Can't wait until the next video. 😊
Thank you!!
Wow Kenji 😮
Will you be making the lights work as well?
That's the plan. Thanks
Hi Kenji, looking very nice, I wonder if you will put the rest of the electronics in a display base, or modify the bread boards to fit in the car. It will be exciting to see what you do. I look forward to it. Thank you Kenji, and take care.
HIi Brian, thank you for everything.
I think that the equipment other than the motor will be stored in the base. There is no more space in the car.
So satisfying, to watch a master craftsman work. 🙌
Thank you👍
ロマンが溢れていますね！最高です！！
ありがとうございます！
Kenji, you have such wonderful ideas. Thank you.
Thanks😃
Back in 1990 I used a HO scale train track switching mechanism to open my 1/16 scale Lamborghini headlights . It worked perfectly . Then I added my own switch that was basically an on/off /on switch in place of the gear shifter . The original switch was a momentary on/ off/ on switch . Long story short it was an electromagnetic Device and it stayed energized . I turned on the lights and about 30 seconds later smoke started rolling out of the “ boot”. I almost burnt the house down . Lol
True story? ! No laughing matter!🤣
開閉動作が物凄く自然な感じでめちゃめちゃカッコイイです！スイッチ押したくて堪らん！
ありがとうございます😃
頭の中に見えている完成モデル通りに、不具合を解消しながら実際に具現化されていくスキルは流石です。見習いたいですね！
ありがとうございます😃
おおー、凄い！ヘッドライトも光って欲しい😍
ありがとうございます😃光る予定です。
さらにコンパクトな、マイクロアクチュエータを使うという手もありますね。
ステッピングモーターの制御もきっと乗り越えられるでしょう。
なんですかそれは。それもPCでコントロールするものでしょうか？
アクチュエーターは伸縮運動をするもので、リニアサーボもと呼ばれます。
構造が単純なので小型のものがあります。
一般に市販されているものは、従来のサーボと制御方法は同じだと思います。
Sensei I have been absent from your channel for some time, but i see you have been expanding your craft, your art is unbeatable.
Hope you have been well- Mike.
Thank you for coming to see me after a long time.
Come see me every day from now on😂
@@kenji-plasticmodels 🤣🤣🤣
that's awesome mate, your just too good 👍👍👍👍👍👍👍👍😁
Thank you!!😁
仮止めのテスト動作で既にカッコいい。
ありがとうございます😃
Very nice. However you can get much smaller servos or linear servo for a better fit.
I wrote it elsewhere, but this beginner set only had this!
@@kenji-plasticmodels , ah. Ok. You did a very good job with such a large servo.
スターターキットのサーボがそのまま入ってしまった😮 流石です。
いやこれしか入って無いんですもの。もっと小さいのあるんですかね？
アリエクで良く1.5センチ角ほどのものを見かけます。ライトの針金を押せるほどのトルクがあるのか分かりませんが、使えたら工作の幅が広がりそうです。
Absolutely amazing!!!
Thank you!!
お疲れ様です。
バッチリ動きますね。素晴らしい！😊
サーボモーターで動かすロッドと、左右のライトを繋ぐロッドの連結を左右均等の位置にしてあげられれば、開閉タイミングがピタリと左右合うのですが…
若干左側が遅れる感じがしますね。
左右を繋ぐロッドを太くするか、硬質素材に変えられれば、もう少し抑制できるかも。
配線も収めなくてはならないですし、その辺りはトレードオフの関係になりますよね。
台座に載せて、臓物は全て台座に収めないと、厳しいと思いますが、モーターはトルクが必要なので、余り細い電線にできないんですよねー。
どう解決してゆくのか、次回も楽しみにしております。😊
@night crow さん お疲れさまです。ありがとうございます。
この時点ではマスキングテープ仮止めなので、その遊びが出る分そういう動きになっているのかなと思います。（実のところ分かりませんが(^_^;)）
あまり細い電線にできないとのこと、まったく知りませんでしたので助かりました。
@Alreschaさん ありがとうございます、確かにそういうボロい感じがロータスっぽいですが、本番では修正されるかもしれません😂
Woow evry time a realy superb job 👌 🙏
Thanks!✨
@@kenji-plasticmodels you welcome Buddy 😉
良いっすね、これぞ紛れもなく電動リトラクタブルヘッドライト！！
1/24スケールでこれをやってしま所が凄い
ありがとうございます😃
Fantastic, but to be scale accurate, one of them should only open halfway, like the car is drunk. And sometimes, the other one just shouldn't move at all. It's a Lotus thing...
Well, that's for sure!🤣
さらに小さい場所には、（おそらくデジカメのピント用）の
2相4線式ステッピングモーターの８㎜径くらいのが１０個２０００円程度で販売（アマゾン）されています
これくらいならマイコンのポートで直接駆動できると思います
ESP32-S3/C3（￥600/￥300くらい秋月）のWi-Fiモジュールなら開発ボード不要でUSBに直結できるので20㎜角でおさまり、Wi-Fiでリモコン化可能です
ご参考までに
ありがとうございます😊
Brilliant, as always.
Thanks!
Great work! You can probably use a arduino nano instead of the uno, its much smaller, maybe not fit in the car but almost, and its also cheap. Thanks for your videos!
Thank you!👍
いつも楽しませてもらってます
モーターの配線がドイツ色なのがなんかいいなぁ
ありがとうございます😃
それは見事ですね！✨✨👍😎✨✨
ありがとうございます😊
@@kenji-plasticmodels どういたしまして😉👍
リトラの電動開閉凄いですね!!😮
ヘッドライトも点灯ですね!!
知らんけど!!😀✋
点灯ですよ、知らんけど。
@@kenji-plasticmodels 知らんけど返し!!(笑)👍
引き続き動画を楽しみにしてます🙂✋
ok... that's cool.
Thanks😃
Masterpiecer absolutely!!!!!🍻🍻🍻
Thanks✨
ピアノ線をＴ字形に一筆書きに曲げてＴのタテセンのところを90度にひねって、そこにコントロールロッドを接続する方法が超小型模型飛行機で良く見かけます。
情報ありがとうございます。
お疲れ様です。
想像していたより小さいと思ってたサーボモーター…ボンネット内に仕込むとなると想像していたより大きかったですね…
もっと小さいのないのかなあと探したんですが、なかったんですよね
Incredible animation. 👌
Thanks!
以前作ったフェラーリにも是非組み込んで下さい！
それは無理😅
ふーん、シャーシじゃなくてボディに固定するんだ。って首傾げてたら、ちゃんと説明があったので「流石だな!」って思ってたら、最後に「知らんけど」って。w
盛大に“ズッコケ”ましたよ!
ちゃんと説明しているときは油断してはいけませんよ😃
リトラクタブル、もう本物みたいです。配線はセンターコンソールを通すものだとばかり思ってました。「知らんけど」...真面目なkenjiさんがいったいどこでこんなパワーワードを覚えたんでしょうか🙃
配線はセンターを通しますよ。あと、長い説明が続いたら最後に「知らんけど」が出ます。たぶん初めてではありません😃
Fantastic !!!! 💯👍👍
Thank you!😃
もし、ディアブロを制作されるなら、前期型でおねがいします！
リトラが好きなんですね。
👍👍
이번 영상도 잘 보았습니다
감사합니다😃
ワシもアリエクがAmazon以上の趣味活インフラになってるわ😁👌
アリエク使ったことないので、また今度使ってみます。
Kenji... Have you test the wire make under the car?
I will do it later...
More!!! 🧡🧡
Thanks!
可動部をそのままで動かして、ボンネットが跳ね上がるの期待してたのにw
それのほうが面白いなあ。。。次はそうします。
8:25 is the lip balm used as a release agent?
that's right! I will remove the motor later.
👍👍👍👍👍
I don't understand why you're using such a big and powerful servo just to open and close the lights?
As I said in the video, I am a beginner in electricity and know nothing. This was the only servo motor in the starter kit.
@@kenji-plasticmodels OK, no problem, I would have done the same :)
🤗👍👏🌞
Why didn't you use a linear micro servo 🤔
As I said in the video, I am a beginner in electricity and know nothing. This was the only servo motor in the kit.
ヘ、ヘッドランプまでモータードライブするとは！（＠＠）携帯のバイブレーションじゃパワー足りないのかな。
電気関連が苦手で詳しくないので、携帯のバイブレーションモーターの利用方法がそもそも分かりません…。😅
今のところ初心者セットに入っているものでやりくりするだけです。
私もAmazon見たんですけど、全く分かりませんでした（苦笑）
Helas I appreciate your skill but I think static model must remain static model, I'm not interested in RC nor interested in bizarre hybrids like a single movement of lights, a useless addition, but never mind I don't want to criticize your nice game.
Everyone has their own favorite. I make what I like the way I like it.