*The only downfall **do7.pl/ZStabilizer** I found is the rosette mount. Admittedly, I had to return my first Weebill S because the rosette mount is screwed into the soft aluminum body by and hand full of tiny screws which have very short lengths and small threads. When mounting my monitor using a bracket from SmallRig, the rosette mount snapped right off of the body and stripped the screw holes and could be repaired. I wish Zhiyun had used a harder steel for that portion of the body so that the screws didnt strip the holes so easily.*
I want use the follow mode (f) on zhiyun webill lab, without press the front button or use phone for make it. I think that the mode (F) is more important of the mode (pov) that have a dedicated button
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
Thanks Brad, very helpful stuff! One thing bothers me, the triple lock does lock every button APART from the power on / off button. This should be addressed as I have accidentally powered off the Weebill numerous times (especially when using both hands to operate, which is very much to my liking). This should be addressed as follows: Triple clicking the LV button locks''ALL'' buttons (including the power on / off button!). But when ''ALL'' buttons are locked, the pressing of LV or POV button together with power button will power off the gimbal... This is in case if anything goes terribly wrong and Gimbal needs to be shut off in the emergency. Keep up the great work!
what really sucks is if someone like me who always use the All follow F mode but dislike holding the button to maintain all the time , so when my phone run out of the battery , BOOM! and frequently mess up with the power off button as well, I am thinking maybe I should use my Plus as well, rather than this gear.
Datos en consideración para lo siguiente: 1 los modelos de cámara que no figuran en la tabla se probarán en el futuro de acuerdo con la valoración del mercado. 2 SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300 no es compatible con la apariencia fotos traseras o vídeos. Las fotos tomadas con panorama y timelapse no se pueden guardar en la cámara. 3 para SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300, no encienda el estabilizador en el modo de vídeo al aplicar la función de transmisión de imagen. Si necesitas usar el modo de vídeo, enciende el estabilizador bajo otros modos y cambia de nuevo al modo de vídeo. 4 cuando la cámara SONY se conecta al laboratorio WEEBILL bajo el modo de vídeo y necesita conectarse a la grabadora o dispositivo externo HDMI, el dispositivo externo no está disponible. Cuando el laboratorio WEEBILL se conecta a una cámara SONY con la función Steadyshot, parte de las cámaras se apagará automáticamente. 5. La transmisión de imágenes no está disponible para la Sony A7/ A7R / A6000
Very helpful. However, without using the phone app, how do I keep it in "Follow" mode? Keeping my finger on the trigger while shooting an 8-hour wedding makes the pad of my finger go numb.
hello, i have this gimbal coupled with a sony A7s. While the movie record button works ok, i cannot find a way to shoot pictures either by pressing the center wheel button or by the mobile app...
Vì lens sony 18-105 có power zoom nên tại sao lại phải dùng motor riêng để zoom? Lens Sony 18-105 có thể zoom bằng mini tripod GP-VPT1. Zhiyun có thể viết lại firmware để dùng núm zoom để điều khiển zoom lens có power zoom không?
was thinking to buy this but one thing comes to mind, don't the buttons/control pads get in the way? yes you can lock them but surely its uncomfortable as your hand would cover them so you have less grip? anyone have this issue? thanks
Are there any remote controllers compatible with Weebill? Like "ZW B02" or "Motion Sensor Wireless Remote Control" I wish to have real joystick remote control, not phone screen.
awesome tips throughout the video, thanks! but please consider smoothing out the S-sonsonants in the audio with post processing, this slightly lisp-ish voice sounds quite harsh with the headphones on.
Thanks for telling about locking the keys, my 2nd most Complaint just resolved, 1st is we cant turn on Follow mode directly from gimbal with holding front trigger, and the 3rd is holding go button to keep ur gimbal in sports mode, this should had some option.
@@ZhiyunTechGlobal Of course, BUT full follow mode needs to be enabled all time not only by app or holding the trigger button (which is exhausting) but by a physical button on the gimbal!! Also I don't see support for Canon DSLR models which is stripped for no reason as it was working like a charm on my Crane 2!! Come on ZHIYUN you can do better than this!
@@visualsbypreet thank you so much for your precious tip! I have another one if you have discoverded it.. that is if there is an AUTO CALIBRATION button as it is in the DJI RONIN and MOZA AIR 2??
Hi bro good video 👍👍👍... can you tell me how to lock subject on the side while walking straight. So the gimbal will continue focus on to subject...somesort like a hyperlapse
Do you seriously have to use the external motor to control the zoom on the 18-105 motor zoom sony lens which can be controlled via the camera and usb? I thought the cranes already support zooming via usb. Why not the weebill?
Hi Brad, thank you for the tips, I need to shoot video from a helicopter and need to lock just the roll movement so I can keep the horizon strait. I haven’t found how to do this. Please let me know. Thanks
Thank you for the great tip! Is there a way to get the iPhone/smartphone responsive? It’s always delay when I move the camera and gimbal. Is there an alternative accessories to mount an external camera monitor like the Atomos Shinobi?
I just order Zhiyun weebill lab and it will reach my home after 3 days, will it work fine with Canon EOS 70d and its default lens? Because i couldn't find my camera type in the compatibility list.
Great video! Will I be able to put my Manfrotto RC2 adapter on so I can continue to use the QR that I use for everything? I use a A6500 and Sigma 16mm f1.4
Hi, I am using sony a6300 paired with 18-105 g lens. When I connect my phone and camera to the gimbal,I get full control except for taking pictures. I am not able to click pictures using the gimbal handle or through the phone. Now because of this, I am not able to use the timelapse option or even the trajectory motion-lapse as it cant click.
It is a known issue and we are working on it. Please check zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@@ZhiyunTechGlobaloh ok cool I hope it will be resolved soon. Yea I have checked the list and mine is Sony a6300 as I said so it should support all functions.
@@ZhiyunTechGlobal Thanks, Brad... EXTREMELY informative!. Issue, shutter button half-press to focus and its works. However full press is not taking the picture. I'm using Sony A6300. Is there any specific setting in the camera, please let me know
Hey I just bought the webill lab. And I have a gh5 with a 12-60mm Panasonic lense. My set up weighs about 2.5lbs and it does say it holds up to 6ish lbs. I am worried about the compatibility list since it does not show my lense . Would that be a problem? With using the gimbal?😳
Hi I bought the device today. I use it with the Sony a6000. I'm having trouble taking pictures. It focuses when I press the shutter button halfway down but it does not take the picture when I press it fully. What could be the reason?
I've been looking endlessly if the zhiyun weebill lab can follow while being on the tripod e.g. when using it while vlogging talking to the camera and the camera can follow me while I move around. Can it do that?
The app has a 'follow target' function, so it should be able to do it. How well will it track? Don't know yet, haven't played with this. Just got mine and pretty damn happy with it so far!
hi. my weebill lab keeps on vibrating in some angles and today i tried vortex mode and it wasn't working and my motors strenght was hig and i am using sony a6300 with sigma 30 mm. kindly help. gimbal was stable.
Please make a test video with Full frame Sony and GM zoom lens. Most people found that this is not ble to control even 3.5 lb payload (and 6.6 lb is just a fake claim)
if i pair the weebill with g7x camera, can i take pictures or start recording by pressing the button on the weebill? (example long press for taking pictures etc)? can the weebill be paired with the g7x? cheers
G7X is not supported.Check the support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Found it in the official website: zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Hi! I have a question! When I plug my Sony A7iii in the Weebill Lab, the steadyshot turn off automatically. Can I use the steadyshot on, with the cable plugged on it?
I am contacting you because Weebill Lab displayed the following message on the display: UPDATE and right after the message looks like an X, any function is impossible to perform. I wonder if there is any solution to this?
hey Brad. do you know how to save the control rate parameter settings in the weebill lab? so that once you have changed them in the app the stay that way even after turning the gimbal off and on again without using the app? thank you
Make sure your camera has been set to pc+tether mode. Check the settings here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@@ZhiyunTechGlobal hi, the panorama is not working on gh5 with zy app. it records the movement but nothing has been recorded in the camera (pictures). timelapse works fine but skips some frames. thanks.
Hi Brad, I have a question. Is it possible to slow down the maximum rotation speed of the Weebill lab? With my other gimbal, the Zhiyun crane v 2 it is possible to adjust the maximum speed via the app. But I couldn't find this option in the ZY play app. If it is possible for the Weebill lab too, can you explain me how to do this? I thank you in advance. Jack
Hi. Anyone tested it with a Canon 5D Mark IV and a Canon 16-35mm lens? Would that work? (those have about 1.2kg, less than that camera holds, but I'm worried about the size of the Camera on weebill. Thank you.
hi i have a question I bought zhiyun crane 3 lab and I have a Canon XA10 camera. Can I connect the zhiyun crane 3 lab remote control cable to my camera to start and stop video recording?
@@ZhiyunTechGlobal I just wish I could start and stop the video recording. What cable can I use? I don't need the other functions of zhiyun crane 3 lab. just start and stop recording with the crane 3 lab recording button
Hey, anybody connected Zhiyun Weebill to A73 for using record button on the gimbal? I have sony cable from previous pair a6500 and crane M.. Trying to do same thing with new set.. No success =(
@@ZhiyunTechGlobal Hi, I do not have weights, They were not part of the kit I bought. I do not know there are any. But if I had weights, how would I put them on the gimbel? Until now nothing helped. I can not record quality sound with the gimbel. Perhaps you will spend a video in favor of connecting additional items such as microphone and others that affect the balance. Thank you
@@LifestoryDocofilm Thanks for your suggestion and later we'll release some accessories like that. At present you may need to find some common camera accessory like cages to try with the mic.
@@ZhiyunTechGlobal There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
Many people don't know if Webill Lab works with Sony A7iii and 24-105 f4 or 16-35 2.8 GM lens. Please make a video about this, I think you're loosing lots of customers due to the bad video reviews with people not making it work.
Please check the camera support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
+Robert Larsson It kinda works with the a7iii works with the 16-35 gm. I've gotten it decently balanced although you won't be able to go into flashlight mode because the eyepiece will hit the rear motor. I was able to rig some counter balance weights which allowed me to use the gimbal as intended but it just wasn't an ideal combo. I opted on getting a lighter weight lens combo for the weebill lab and the Ronin S for a more robust set up. Look into the samyang 24m af f2.8. Beast of a little lens with great autofocus for a very cheap price. Good Luck!
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
![Zhiyun Weebill Lab [Review + Test Footage]](/img/1.gif)
*The only downfall **do7.pl/ZStabilizer** I found is the rosette mount. Admittedly, I had to return my first Weebill S because the rosette mount is screwed into the soft aluminum body by and hand full of tiny screws which have very short lengths and small threads. When mounting my monitor using a bracket from SmallRig, the rosette mount snapped right off of the body and stripped the screw holes and could be repaired. I wish Zhiyun had used a harder steel for that portion of the body so that the screws didnt strip the holes so easily.*
I want use the follow mode (f) on zhiyun webill lab, without press the front button or use phone for make it.
I think that the mode (F) is more important of the mode (pov) that have a dedicated button
Same here, did they release a firmware for this?
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
@@johngaleano1291 OMG THIS IS GENIUS!!!!!! WORKED PERFECTLY THANK YOU SO MUCH
@@vTvvo no problem brother. Glad I could help!
Thanks Brad, very helpful stuff! One thing bothers me, the triple lock does lock every button APART from the power on / off button. This should be addressed as I have accidentally powered off the Weebill numerous times (especially when using both hands to operate, which is very much to my liking). This should be addressed as follows: Triple clicking the LV button locks''ALL'' buttons (including the power on / off button!). But when ''ALL'' buttons are locked, the pressing of LV or POV button together with power button will power off the gimbal... This is in case if anything goes terribly wrong and Gimbal needs to be shut off in the emergency. Keep up the great work!
what really sucks is if someone like me who always use the All follow F mode but dislike holding the button to maintain all the time , so when my phone run out of the battery , BOOM! and frequently mess up with the power off button as well, I am thinking maybe I should use my Plus as well, rather than this gear.
Datos en consideración para lo siguiente:
1 los modelos de cámara que no figuran en la tabla se probarán en el futuro de acuerdo con la valoración del mercado.
2 SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300 no es compatible con la apariencia fotos traseras o vídeos. Las fotos tomadas con panorama y timelapse no se pueden guardar en la cámara.
3 para SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300, no encienda el estabilizador en el modo de vídeo al aplicar la función de transmisión de imagen. Si necesitas usar el modo de vídeo, enciende el estabilizador bajo otros modos y cambia de nuevo al modo de vídeo.
4 cuando la cámara SONY se conecta al laboratorio WEEBILL bajo el modo de vídeo y necesita conectarse a la grabadora o dispositivo externo HDMI, el dispositivo externo no está disponible. Cuando el laboratorio WEEBILL se conecta a
una cámara SONY con la función Steadyshot, parte de las cámaras se apagará automáticamente.
5. La transmisión de imágenes no está disponible para la Sony A7/ A7R / A6000
Looks awesome! I'm going to Iceland and it would be a great gear to carry. Very small.
Hi, I have this gimbal and I was wondering if there is a vertical mount/plate I can use to film vertically? Please advise
Yah i was wondering the same
Production value on this is amazing! Great work!
Very helpful. However, without using the phone app, how do I keep it in "Follow" mode? Keeping my finger on the trigger while shooting an 8-hour wedding makes the pad of my finger go numb.
My V mode is not working. it just rotates a little and stops. Please tell me where is the problem?
hello,
i have this gimbal coupled with a sony A7s. While the movie record button works ok, i cannot find a way to shoot pictures either by pressing the center wheel button or by the mobile app...
Hi Brad. Again ... awesome. A very good tutorial. I'm glad to see you again. Thank you.
Vì lens sony 18-105 có power zoom nên tại sao lại phải dùng motor riêng để zoom? Lens Sony 18-105 có thể zoom bằng mini tripod GP-VPT1. Zhiyun có thể viết lại firmware để dùng núm zoom để điều khiển zoom lens có power zoom không?
was thinking to buy this but one thing comes to mind, don't the buttons/control pads get in the way? yes you can lock them but surely its uncomfortable as your hand would cover them so you have less grip? anyone have this issue? thanks
Why do you had remove fuctions to this gimbal (Weebil LAB) in the Zhiyun App??
Are there any remote controllers compatible with Weebill? Like "ZW B02" or "Motion Sensor Wireless Remote Control"
I wish to have real joystick remote control, not phone screen.
Unfortunately no
Same
Hi, I cannot adjust pan/tilt manually. When the gimball is on, the motors prevent me from adjusting it manually (and no, the axis are not locked)
awesome tips throughout the video, thanks! but please consider smoothing out the S-sonsonants in the audio with post processing, this slightly lisp-ish voice sounds quite harsh with the headphones on.
Thanks for telling about locking the keys, my 2nd most Complaint just resolved, 1st is we cant turn on Follow mode directly from gimbal with holding front trigger, and the 3rd is holding go button to keep ur gimbal in sports mode, this should had some option.
You can use the app to switch to different modes.
@@ZhiyunTechGlobal Of course, BUT full follow mode needs to be enabled all time not only by app or holding the trigger button (which is exhausting) but by a physical button on the gimbal!! Also I don't see support for Canon DSLR models which is stripped for no reason as it was working like a charm on my Crane 2!! Come on ZHIYUN you can do better than this!
There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@@arthura777 There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@@visualsbypreet thank you so much for your precious tip! I have another one if you have discoverded it.. that is if there is an AUTO CALIBRATION button as it is in the DJI RONIN and MOZA AIR 2??
I just received my weebill s yesterday. My joystick moves up and down but not side to side. Can you help me with that?
Hi bro good video 👍👍👍... can you tell me how to lock subject on the side while walking straight. So the gimbal will continue focus on to subject...somesort like a hyperlapse
Try to use lock mode and keep practicing!
Do you seriously have to use the external motor to control the zoom on the 18-105 motor zoom sony lens which can be controlled via the camera and usb? I thought the cranes already support zooming via usb. Why not the weebill?
did you take an answer?
Hi Brad, thank you for the tips, I need to shoot video from a helicopter and need to lock just the roll movement so I can keep the horizon strait. I haven’t found how to do this. Please let me know. Thanks
Thanks, Brad...well done! EXTREMELY informative!
Thanks for your support!
Thank you for the great tip!
Is there a way to get the iPhone/smartphone responsive? It’s always delay when I move the camera and gimbal. Is there an alternative accessories to mount an external camera monitor like the Atomos Shinobi?
The delay is related to the environment interference and the camera hdmi output rate. We are doing our best to improve it.
Zhiyun-tech good to know! Thank you!
you said you left a link to the comatility list?
zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@@ZhiyunTechGlobal wow thats fast! Thanks!
3:21 what if I have an HDMI cable coming directly down from the camera? Are you saying the Weebill will not fight the cable's resistance?
This may sound like a stupid question but how do you activate the blutooth signal on the LAB? I tried using the app and it cant find it.
it will turn on automatically
@@ZhiyunTechGlobal Thank you for the response! I realized I had it looking for the wrong device. lol
I just order Zhiyun weebill lab and it will reach my home after 3 days, will it work fine with Canon EOS 70d and its default lens? Because i couldn't find my camera type in the compatibility list.
Please upload some video of weebill lab with z6 its getting hard for me to use it with Z6 nikon
Is there a way to adjust the speed of vortx mode? And why is mine not always able to perform an entire roll?
Is it possible to record with the iPhone 11 Pro on the Webill lab gimbal?
Great video! Will I be able to put my Manfrotto RC2 adapter on so I can continue to use the QR that I use for everything? I use a A6500 and Sigma 16mm f1.4
Make sure the combo can be balanced.
half the features not working in this gimbal
Love the over the shoulder hack
Hi, I am using sony a6300 paired with 18-105 g lens. When I connect my phone and camera to the gimbal,I get full control except for taking pictures. I am not able to click pictures using the gimbal handle or through the phone. Now because of this, I am not able to use the timelapse option or even the trajectory motion-lapse as it cant click.
It is a known issue and we are working on it. Please check zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Hi Brad. Again ... awesome. A very good tutorial. I'm glad to see you again. Thank you.
@@ZhiyunTechGlobaloh ok cool I hope it will be resolved soon. Yea I have checked the list and mine is Sony a6300 as I said so it should support all functions.
yeah l have the same problem l cant take pictures weebil lap its only focusing but not taking picture for time lapse
@@ZhiyunTechGlobal Thanks, Brad... EXTREMELY informative!. Issue, shutter button half-press to focus and its works. However full press is not taking the picture. I'm using Sony A6300. Is there any specific setting in the camera, please let me know
Hey I just bought the webill lab. And I have a gh5 with a 12-60mm Panasonic lense. My set up weighs about 2.5lbs and it does say it holds up to 6ish lbs. I am worried about the compatibility list since it does not show my lense . Would that be a problem? With using the gimbal?😳
This lens can work. Make sure it is balanced and change the motor strength to high.
When supporting a 3kg load, is it possible to use Nikon DSLR cameras (D600 specifically)?
It is not recommended to use dslr on it
Hi I bought the device today. I use it with the Sony a6000. I'm having trouble taking pictures. It focuses when I press the shutter button halfway down but it does not take the picture when I press it fully. What could be the reason?
Please check it here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Is there a reason why my vortex mode is slow
Now you can adjust the speed in the latest firmware.
I've been looking endlessly if the zhiyun weebill lab can follow while being on the tripod e.g. when using it while vlogging talking to the camera and the camera can follow me while I move around. Can it do that?
The app has a 'follow target' function, so it should be able to do it. How well will it track? Don't know yet, haven't played with this. Just got mine and pretty damn happy with it so far!
Is it possible to connect more than one smartphone/tablet to control playback?
Unfortunately no
hi. my weebill lab keeps on vibrating in some angles and today i tried vortex mode and it wasn't working and my motors strenght was hig and i am using sony a6300 with sigma 30 mm. kindly help. gimbal was stable.
Make sure the pan axis is correctly balanced.
Please make a test video with Full frame Sony and GM zoom lens. Most people found that this is not ble to control even 3.5 lb payload (and 6.6 lb is just a fake claim)
Please check out zhiyun-tech.com for the full compatible list. Thank you.
if i pair the weebill with g7x camera, can i take pictures or start recording by pressing the button on the weebill? (example long press for taking pictures etc)? can the weebill be paired with the g7x? cheers
G7X is not supported.Check the support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Great video! 1:17 did u miss the link to compatibility list?
Found it in the official website: zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
When u lock the front buttons, does the record button get locked as well?
The whole front pannel will be locked
Amigo, qual a diferença entre os dois modelos de motores de foco? Quero comprar e estou na duvida. Possuo um WeeBill Lab!
Could you please describe it more clearly? thanks
@@ZhiyunTechGlobal qual a diferença entre CMF-03 (lite) e CMF-04 (max) ?
03 for focus and 04 for zoom
Anyone know if this gimbal can fit my Sony AX43?
Sorry, it is not in compatibility list.
Hi! I have a question! When I plug my Sony A7iii in the Weebill Lab, the steadyshot turn off automatically. Can I use the steadyshot on, with the cable plugged on it?
It is a known issue. We are working on it and sorry at present it cannot.
That’s ok! Thank’s a lot!!!
I am contacting you because Weebill Lab displayed the following message on the display: UPDATE and right after the message looks like an X, any function is impossible to perform. I wonder if there is any solution to this?
Sorry please contact your seller for aftersale service if you meet the x issue.
@@ZhiyunTechGlobal me seller says they can not do anything, asked to contact the manufacturer. I would like a solution because I use Weebill for work.
What’s the point of there being a USB port on the Weebill Lab if you can’t use it to charge the batteries?
For factory use
WHY GH5 IS not Oprate With Zhiyun Weebill Lab
Camera should be changed into PC+tether mode
My Canon T7i is not on the camera list. Will this gimbal work with this camera?
Sorry it cannot control canon cameras
Excluding the control, will the gimbal support the weight and size of the canon t7i. Basically can I balance this camera with a EFS 18-55 lens?
Some users will use 80D with kit lens or prime lens. You can do a search in youtube :)
this one I have compatible with Canon 80d sigma 18-35mm
I use a 5d mk iii, and orderd this, so I cant even use this ???????
hey Brad. do you know how to save the control rate parameter settings in the weebill lab? so that once you have changed them in the app the stay that way even after turning the gimbal off and on again without using the app? thank you
At present, the custom settings can only be saved in the app.
thank you for the answer. please change this if possible in a future firmware update.@@ZhiyunTechGlobal
@@stefangimpl4138 We will forward your suggestion to our developers.
lumix gh5s not working with zyplay app
Make sure your camera has been set to pc+tether mode. Check the settings here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@@ZhiyunTechGlobal hi, the panorama is not working on gh5 with zy app. it records the movement but nothing has been recorded in the camera (pictures). timelapse works fine but skips some frames. thanks.
The compatibility list isn't there
This is Weebill Lab camera compatibility list:zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20220714/1657787566825-NbD8GFNP.pdf
Hi Brad, I have a question. Is it possible to slow down the maximum rotation speed of the Weebill lab? With my other gimbal, the Zhiyun crane v 2 it is possible to adjust the maximum speed via the app. But I couldn't find this option in the ZY play app.
If it is possible for the Weebill lab too, can you explain me how to do this?
I thank you in advance.
Jack
If you mean the speed of vortex mode, you can adjust the speed with the latest firmware.
@@ZhiyunTechGlobal Thanks for your reaction!
Is it possible to make compatible Weebill Lab focus control with Tilta Nucleus Nano motor?
It depends on whether you can balance the combo or not
@@ZhiyunTechGlobal I haz balanced properly, may be able to use Weebill focus wheel with Nucleus? There is no more space to mount two focus wheels )
@@ELFMEDIA No it can only support the weebill lab focus motor
Hello, i want any plate for weebill lab to fits in at manfrotto mvmxpro500
Where the link with camera/lenses compatibility at?
zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Can i comfortably use it.. With my canon 77d?
Someone tried with short prime lens. You can do a search in youtube.
my Canon M50 works great except the shutter buttons, balances fine even with the screen out and a wide angle lenses if anyone is interested
I got an x on the weebill lab screen someone with the same problem
Hi. Anyone tested it with a Canon 5D Mark IV and a Canon 16-35mm lens? Would that work? (those have about 1.2kg, less than that camera holds, but I'm worried about the size of the Camera on weebill. Thank you.
Ciprian Samihaian sorry man, this is not for canonians or nikonians. Just sell it and switch to sony and u ll be fine.
hi i have a question I bought zhiyun crane 3 lab and I have a Canon XA10 camera. Can I connect the zhiyun crane 3 lab remote control cable to my camera to start and stop video recording?
No it doesn't support the video cameras
@@ZhiyunTechGlobal I just wish I could start and stop the video recording. What cable can I use? I don't need the other functions of zhiyun crane 3 lab. just start and stop recording with the crane 3 lab recording button
@@rafaeldelapaz6737 It is not about the cable. It is a camera control protocol issue.
@@ZhiyunTechGlobal I understand and in question of the video transmission through the HDMI cable if it works with Canon XA10?
I also have a Canon 200D Canon EOS Rebel SL2 camera. Is it useful to use the recording button of the Zhiyun Crane 3 Lab? And what cable should I use?
Hey, anybody connected Zhiyun Weebill to A73 for using record button on the gimbal? I have sony cable from previous pair a6500 and crane M.. Trying to do same thing with new set.. No success =(
please ignore it cuz I did it! =)) after watching "Connect to Zhiyun Weebill LAB Image Transmission"
I can not balance my GH4 camera with a microphone on it. why? (12-35 lens)
Try to use some counterweights because the mic will change the barycenter.
@@ZhiyunTechGlobal Hi,
I do not have weights,
They were not part of the kit I bought. I do not know there are any.
But if I had weights, how would I put them on the gimbel?
Until now nothing helped. I can not record quality sound with the gimbel.
Perhaps you will spend a video in favor of connecting additional items such as microphone and others that affect the balance.
Thank you
@@LifestoryDocofilm Thanks for your suggestion and later we'll release some accessories like that. At present you may need to find some common camera accessory like cages to try with the mic.
@@ZhiyunTechGlobal Thanks
I dont get it. The weebill works perfectly with my gh5 and 12-35 lens. Why it didnt with your gh4???
Hi, is there any hack to get the Weebill Lab into follow mode without pressing a button continuously and without any app on the phone? thx
At present it cannot.
Could we look forward for a firmware update on that? Would be so great. TY
@@jochenretter We'll forward your suggestion to our developers. Thank you.
There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@@ZhiyunTechGlobal There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
Many people don't know if Webill Lab works with Sony A7iii and 24-105 f4 or 16-35 2.8 GM lens. Please make a video about this, I think you're loosing lots of customers due to the bad video reviews with people not making it work.
Please check the camera support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
+Robert Larsson It kinda works with the a7iii works with the 16-35 gm. I've gotten it decently balanced although you won't be able to go into flashlight mode because the eyepiece will hit the rear motor. I was able to rig some counter balance weights which allowed me to use the gimbal as intended but it just wasn't an ideal combo. I opted on getting a lighter weight lens combo for the weebill lab and the Ronin S for a more robust set up. Look into the samyang 24m af f2.8. Beast of a little lens with great autofocus for a very cheap price. Good Luck!
No comparability link
zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
Has anyone figured out how to lock F mode without a phone yet?
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
Where are the hacks? The only hack I see is the tool on screen.
This video, while useful, simply describes how to use the controls in the way they are intended. That is the opposite of "hacks".
Hacks are things you wouldn't find in a manual.
If you have any hack, feel free to share!
No tests just "BlaBla...Bla...???