Hi. I have did the same process. But after i have finish the car show there is no key in the car. But the key is locking the doors ! But the wont start and no key logo showed up. Any advice?
you have sliced the immob chip on the board. it's a goner..you need a new key to be programmed now $$$. There's a risk when you introduce a knife to cut the shell. bmw wants more money for a new fob, not repair the shell.
Do NOT try what is shown in this video. These key fobs are not meant to be opened, unless broken. You will regret it if your car does not start any more.
This video is a lie. After the ring is pried off it is obvious that the key has already been opened. Trust me, I do MINI key repair on the side, you can't slice these fobs open like you are cutting warm butter. Also if you take that type of blade to the edge of this type of key you will slice open your fingers and cut off switches and other components off of the circuit board. Follow these directions at your own risk.
@@UNPhantom93 Go in gently from the back where the pull out key goes in. Use a small flat blade screwdriver (Xcelite "Greenie" works great for this) and go around the key along the seam, not perpendicular to it; in other words, don't jab things into the key.
i second that. these are not meant to be repaired. bmw wants you to get a new fob $$$. dont try this if you only have 1 key in hand. chances of cutting internal circuity and transponder chip is high. be warned.
Great video, however, you made get to the place to purchase the product too difficult...sorry, but too much nonsense. You need to just send me to the website., not take me to adds.
Horrible music! Keep it quiet. Silence is golden. You are forcing open the sections and damaging the key fob. You don't even know how to remove the key, just using force. Press the button to get the key out.
@@newcarkeysworld No, you are purporting to be experts by advising people on what should be the best practice, so go away, take the positive approach and do a new video properly and, yes, - without the cr*p music.
Thank you, exactly what i needed to see!!
Easy way, not shit talk!
And done just do by yourself.
Thanks mate
Nothing in real life works just like these videos. One has to destroy the old case, apparently, to remove the old board. I assume.
Do you sell the original case of the key? that one who comes with the hole to the logo of the mini?
temu
Where did you buy the key fob with mini logo.
temu
I think the music is cool and there’s no shit talk. Thanks.
Thanks this helped out a lot
After I use cutter my key cover is full of cuts
Hi. I have did the same process. But after i have finish the car show there is no key in the car. But the key is locking the doors ! But the wont start and no key logo showed up. Any advice?
Ibrahim Alghawi same problem. Any solution?
Same problem. I think there is a chip or something in the bottom of the fob that needs to be programmed.
you have sliced the immob chip on the board. it's a goner..you need a new key to be programmed now $$$. There's a risk when you introduce a knife to cut the shell. bmw wants more money for a new fob, not repair the shell.
Hai rovinato il chip col cutter.
Less music more detail info please.
very helpful thanks alot
Do NOT try what is shown in this video. These key fobs are not meant to be opened, unless broken. You will regret it if your car does not start any more.
Who dislikes it is just because there mister botherman
Car wouldn’t unlock...mate said it might be the battery....Wish I’d seen this before I replaced the whole damn car battery 😅😂 thanks
Seriously 😳!!!
Thanks 👍
Fake :))) was opened before vide
It's not as easy as I showed
This video is a lie. After the ring is pried off it is obvious that the key has already been opened. Trust me, I do MINI key repair on the side, you can't slice these fobs open like you are cutting warm butter. Also if you take that type of blade to the edge of this type of key you will slice open your fingers and cut off switches and other components off of the circuit board. Follow these directions at your own risk.
So what is the solution then?
@@UNPhantom93 Go in gently from the back where the pull out key goes in. Use a small flat blade screwdriver (Xcelite "Greenie" works great for this) and go around the key along the seam, not perpendicular to it; in other words, don't jab things into the key.
@@1valvashon got it, thanks
i second that. these are not meant to be repaired. bmw wants you to get a new fob $$$. dont try this if you only have 1 key in hand. chances of cutting internal circuity and transponder chip is high. be warned.
Sin la musica asquerosa i alra,seria un video interesante
The music is just ridiculous and annoying.
So annoying!!!
El becerisi çok vasat
THIS IS A PERFECT EXAMPLE NOT TO BUY MINI COOPER
Are you kidding??? That's about the worst design I've ever seen.
Great video, however, you made get to the place to purchase the product too difficult...sorry, but too much nonsense. You need to just send me to the website., not take me to adds.
Horrible music! Keep it quiet. Silence is golden.
You are forcing open the sections and damaging the key fob. You don't even know how to remove the key, just using force. Press the button to get the key out.
You always have the option to turn off the music. You always have options. When it comes to pulling the car key tip. We are just humans.
@@newcarkeysworld No, you are purporting to be experts by advising people on what should be the best practice, so go away, take the positive approach and do a new video properly and, yes, - without the cr*p music.
PATRICIA BELCHIERE eye eye someone has got the painters in 😉
Horrible music.