Hi. I have a new version of TK 6.1 from several days. Now It waiting for the rewiring, and then I will add a movie how it works. For now you can see short simple unpacking movie on my channel. The new version of TK 6.1 supports the recoil and elevation servo (two independent servos). It is also ready to stabilize the main gun (with an additional dedicated gyroscope module) and automatic tilt in the rear position (both modules are being prepared by HL).
@@abramskypl I have an earlier version of the TK 6.0 board on my Leopard 2A6. I think it's the Ver201809 in the video. Can I just purchase a 6.1 board (or a Ver201905 board) and use the existing remote control that came with my Leopard with it?
@@archienov I'm really not sure. Theoretically, the remote looks the same and has the same functions, but you want to pair the remote from the oldest version of TK 6.0 with the latest motherboard TK 6.1. I do not guarantee that it will go backwards. The operating manual of the TK 6.0 / TK 6.1 say nothing about this. Unfortunately, I have only the old versionHL v 3.0 of the control system which I will replace in a few days with the newest TK 6.1. So I have no way of checking if it will work. I think You should ask a seller (e.g. toucanhobby on ebay) or a producer. Good luck!!!
@@VictorHugoRC1111for me it is awesome that the stick occupancy can change with back and forth on the left stick and steer with the right stick like a rc car 😊 with which key combination does it work?
Hello! Nice vid :) Can you help me? I think I have a problem in my new TK 6.1 motherboard. I launched it for the first time yesterday. I think everything works fine except one. CN5 connector - 6V WiFi power supply, where according to the manual it should be 6V, and I have only 0.20V when camera is not connected ( I'm planning to buy the camera soon) ... Is this correct? Shouldn't there be a 6V permanently in there despite the camera being disconnected?
@@冒菜豪 Thank you very much. G + S works. Now I have exactly 6.00V on the CN5 output :) Of course, I forgot to read the manual before turning on the mainboard :) Thanks again for the quick help.
Hi I would love to read what you wrote but unfortunately I understand only German or English. Is it possible for you to write the text again in English because it would be very interesting. Thank you very much and many greetings
@@siemsa1 Google Translate is your friend ... 1, V201809: The original version of the 6.0 motherboard, this is the earliest version, the handling is general, but it is better than the ancient 5.3 motherboard. 2, V201811: improved version 6.0 motherboard, it is the most commonly used motherboard of the 6.0 version of the 2018-2019 factory plastic tank, good handling. 3, V201905: The final version 6.0 motherboard - 6.0S, it is the best, the latest version, it was renamed 6.0S motherboard. It has excellent handling and more features. In addition, the 6.0 motherboard is a motherboard equipped with cheap plastic tanks. The 6.1 motherboard is a motherboard equipped with an aluminum alloy tank. The function of the 6.0 motherboard is completed by the motor. The servo is not supported. The function of the 6.1 motherboard supports the motor and also supports the servo. Thank you for your attention!
冒菜豪 Hi again. I received my 6.1S boards yesterday and installed them. I wanted to ask if it is safe to use a 3S 11.1v Lipo battery for the board. All my other electronics are stock Heng Long (smoke unit, BB unit, turret and drive motors).
Would this bind to a 6.0 transmitter?
Beautiful video! Senks)
大家好，补充一些你们一定感兴趣的内容：
1、新的6.0S/6.1S标签和说明书样张：
s2.ax1x.com/2019/08/30/mjsqbt.png
s2.ax1x.com/2019/08/30/mjsOVP.jpg
2、超级豪华的全铝合金壳体双流齿轮箱（Dual-current driving system），直行电机为590或550，转向电机为480：
s2.ax1x.com/2019/08/30/mjynxJ.jpg
s2.ax1x.com/2019/08/30/mjym24.jpg
更正一下，我发现我对这个齿轮箱的英语名称说的不对，应该叫做：Double Differential Driving System。
hi i have plug evey think to the board no sound no movement not connected any help please
Did you sync up the remote to the new board?
I wonder how the version 6.1 is
Hi. I have a new version of TK 6.1 from several days. Now It waiting for the rewiring, and then I will add a movie how it works. For now you can see short simple unpacking movie on my channel.
The new version of TK 6.1 supports the recoil and elevation servo (two independent servos). It is also ready to stabilize the main gun (with an additional dedicated gyroscope module) and automatic tilt in the rear position (both modules are being prepared by HL).
@@abramskypl Is the auto tilt for the Leopard?
@@abramskypl I have an earlier version of the TK 6.0 board on my Leopard 2A6. I think it's the Ver201809 in the video. Can I just purchase a 6.1 board (or a Ver201905 board) and use the existing remote control that came with my Leopard with it?
@@archienov
I'm really not sure. Theoretically, the remote looks the same and has the same functions, but you want to pair the remote from the oldest version of TK 6.0 with the latest motherboard TK 6.1. I do not guarantee that it will go backwards. The operating manual of the TK 6.0 / TK 6.1 say nothing about this. Unfortunately, I have only the old versionHL v 3.0 of the control system which I will replace in a few days with the newest TK 6.1. So I have no way of checking if it will work. I think You should ask a seller (e.g. toucanhobby on ebay) or a producer. Good luck!!!
@@archienov 是的，你可以，我可以保证。
Hello in which tank model is the board currently installed? Great Viedeo
looks like a leopard 2
The new T-72 has it
@@VictorHugoRC1111for me it is awesome that the stick occupancy can change with back and forth on the left stick and steer with the right stick like a rc car 😊 with which key combination does it work?
@@siemsa1 Personally I like independent inputs, but my friend modified a car knob radio to perform all the tasks with 4 channels only.
@@siemsa1 I'm not sure but it's probably G + Engine start.
Hello! Nice vid :)
Can you help me? I think I have a problem in my new TK 6.1 motherboard. I launched it for the first time yesterday. I think everything works fine except one. CN5 connector - 6V WiFi power supply, where according to the manual it should be 6V, and I have only 0.20V when camera is not connected ( I'm planning to buy the camera soon) ... Is this correct? Shouldn't there be a 6V permanently in there despite the camera being disconnected?
Hi！
Hi！
6.1主板的“CN5”通道并不是一直在工作中，它是可以被控制开启和关闭的，
你可以试试“G”+“S”，然后检查一下电流是否能正常输出。祝你一切顺利！
@@冒菜豪 Thank you very much. G + S works. Now I have exactly 6.00V on the CN5 output :) Of course, I forgot to read the manual before turning on the mainboard :)
Thanks again for the quick help.
6.0 請問 如何單桿模式切換成雙桿模式
你好，单/双杆模式切换是“G+左杆往下”，就是曾经的后尾灯开关操作方法。特别说明一下，如果是普通版本6.0主板，是不支持这个功能的，需要6.0S版本的主板才支持这个功能。
大家好，我解释一下。
1、V201809：原始版6.0主板，这是最早的版本，操控性一般，但是它比古老的5.3主板更优秀。
2、V201811：改进版6.0主板，它是2018-2019出厂的6.0版本塑料坦克最常用的主板，操控性良好。
3、V201905：最终版本6.0主板--6.0S，它是最好的、最新的版本，它被重新命名为6.0S主板。它的操控性非常优秀，功能也更多。
另外，6.0主板是廉价的塑料坦克配备的主板。而6.1主板是铝合金坦克配备的主板。
6.0主板的功能是由电机完成，不支持舵机，而6.1主板的功能支持电机，也支持舵机。
谢谢大家的关注！
Hi I would love to read what you wrote but unfortunately I understand only German or English. Is it possible for you to write the text again in English because it would be very interesting. Thank you very much and many greetings
@@siemsa1 Google Translate is your friend ...
1, V201809: The original version of the 6.0 motherboard, this is the earliest version, the handling is general, but it is better than the ancient 5.3 motherboard.
2, V201811: improved version 6.0 motherboard, it is the most commonly used motherboard of the 6.0 version of the 2018-2019 factory plastic tank, good handling.
3, V201905: The final version 6.0 motherboard - 6.0S, it is the best, the latest version, it was renamed 6.0S motherboard. It has excellent handling and more features.
In addition, the 6.0 motherboard is a motherboard equipped with cheap plastic tanks. The 6.1 motherboard is a motherboard equipped with an aluminum alloy tank.
The function of the 6.0 motherboard is completed by the motor. The servo is not supported. The function of the 6.1 motherboard supports the motor and also supports the servo.
Thank you for your attention!
@@archienov Ich konnte den Text nicht kopieren um ihn zu übersetzen aber Danke für deine Hilfe
What version is this ?
yadi.sk/i/aVDAV3n9PQjQ4g
Who has an instruction manual for this Board in electronic form or a scanned version ? Share.
How do you change the controls to be like those in 2:24?
s2.ax1x.com/2019/08/30/mjsOVP.jpg
@@冒菜豪 Hi. I have another question. Would you know how many Amps can this output to the drive? Can this comfortably power dual 550 motors?
@@archienov Hi！具体的电流数值我无法提供，但是我可以确定，它完全支持550电机。中后期的6.0主板和6.0S主板的供电性能非常充足，主板的耐用度非常优秀，经过大量中国玩家的使用经历验证，完全没问题。在550电机与2S或3S锂电池的使用场景下，都能正常工作。
@@冒菜豪 Thank you!
冒菜豪 Hi again. I received my 6.1S boards yesterday and installed them. I wanted to ask if it is safe to use a 3S 11.1v Lipo battery for the board. All my other electronics are stock Heng Long (smoke unit, BB unit, turret and drive motors).
Thank for good information, Let me share.
I wonder how the version 6.1 is