Ho to Resolution HP LaserJet 600 13.A2.FF Jam in Tray tow

Resolution HP LaserJet 600 13.A2.FF Jam in Tray tow Error
Resolution HP LaserJet 600 The Product is Shut Down Error
Description: This error is not listed in the M600 Service manual. The error is caused by obstruction in the paper feed assembly or faulty feed sensor (PS102) or flag. This is also the equivalent to the entire 4200 and P4000 series, “13.20 PAPER JAM CHECK TRAY 2”
Solution: There has been a modification to the tray 1 pick up assemblies for the P4015 series and M600 series which allow you to pull down an access cover to initially inspect the flag for any obstruction: (shown closed then open) To gain full access to this area, the tray 1 pick up assembly must be completely removed, then check to verify functionality of the feed flag and to see any hidden obstructions.
If the flag operates correctly, you may try to take compressed air to the sensor itself to clear any debris. If that does not clear the message, the entire transfer guide assembly would need to be replaced.

[@jefforgeron5249]

Thank you , your video showed me how to fix a printer at work!

[@PakKingInformationTechnologies]

Great!

[@zaedge_cloudsolutions]

Thanks very much. Solved my problem.

[@EurekaRecycler]

We have a hp Enterprise LJ M604dn and it works fine except the first
print in the morning - has a small bit of gosting or some of the print
is off set. Any ideas? We have changed the : transfer roller, the pickup
rollers, the fuser and the toner cartridge and done a self cleaning but
still have this issue with the first print in the morning. Otherwise is
prints fine after the first print. Any idea's Thank you

[@rezamahdavi2289]

Thank you engineer😍

[@PakKingInformationTechnologies]

Welcome!!

[@muratgulsen5869]

thanks.. mersi.........tesekkurler...from turkey hello...........

[@PakKingInformationTechnologies]

Hello bro

[@talabhaktulavkbkumar3944]

I HAVE HP 600 M602 PRINTER WHEN PRINT ON TRAY2 SHOWING A2 D2 ERROR IN TRAY2.HOW TO SOLVE THE PROBLEM PLEASE SUJJEST ME.

[@remodesigns4570]

Good job MashAllah!
Subscribed Done.

[@PakKingInformationTechnologies]

Thanks

[@wasudeotajane6288]

sir i have hp 600 M602 their is a problem 41.03.02 unexpected size in tray 2 how to solve this error

[@surenderbisht3133]

Mere dost yadi aapke pass clj enterprise M855 me same problem aai hai 13.A2.FF to kuch bata payenge ki kaese problem solving ho bahut kuch kar diya lekin sab kuchh veasa hi hai

[@PakKingInformationTechnologies]

Ok bro jald hi btata hun

[@maliknadeem927]

Sir hp 603 Kuch dare chaliny key Baad speed slow ho jati hai kindly es ka solution batye ga

[@cdnsbci5414]

Ahllah
Very Nice

[@waqasishfaq1569]

Aslamoalikum Brother
602 printer ke speed kuch der chalnay k bad slow hojati hay
koi soulution please.

[@milindmorde4366]

Show Tray 2 open how to resolve

[@PakKingInformationTechnologies]

Tray 2 k swich chack kro unki setting out hy ya wo kam nai kr rehy

[@cdnsbci5414]

Keep it up

[@naveedzafar3510]

Good job

[@PakKingInformationTechnologies]

Thanks bro

[@PakKingInformationTechnologies]

Thanks to All Bro

[@ponetpaki5094]

good one

[@albertaprinter2957]

zabardast

[@MuhammadKhalid-rh7lp]

hp m602 code 60.00.02 tray 2 lifting error

[@PakKingInformationTechnologies]

Tray two k said py gear lagy hoty hen or un ko jo moter chalati hy wo moter ko check kren kam nai kr rehi

[@waqasishfaq8703]

602 پرنٹر کچھ دیر چلنے کے بعد پرنٹر کی سپیڈ آہستہ ہوجاتی ہے ۔ برائے مہربانی کوئی حل بتا دیں۔
شکریہ

[@M.umair63]

Good

[@TrendingVibes]

Ingormative