My unit hasn't arrived yet but if I experience this problem I plan to run it through a basic single-line loop switch pedal. Loop switchers redirect the signal chain and can be used to remove and reinsert pedals when engaged or disengaged. From there I can keep it on at all times and engage it with the loop switcher, avoiding the need to depress the Mini Universe's foot switch.
They are now selling the second version of the mini universe, they fixed the clicking problem, the new version has significantly redesigned the board and removed the true bypass
1 is efx in and connects to 8 , 2 on indicator LED ,3 efx out 4 is input 5 ground 6 output And jumper 7 to 9 this is common 3PDT footswitch diagram. But there are others look for 3PDT Wiring diagram
I added 1M ohm resistors then replaced it with 2.2 k ohm resistors as shown but i noticed a drop in volume when the pedal was used compered to bypass mode. The effects pedal was used in front of the amp. Having tried it again through the effect loop it sounded better, by the way both resistor values removed the popping sound.
@@paulyates5092 it didnt affect the overall volume but the tonality just a bit for me. The lower the resistor is, the more treble Will be filtered. By the way, there is a workaround for both switch pop and delayed engage issues, i started a topic on diystompboxes.com and someone found a solution for that.
No bro, not yet. There's one guy named @isaquelima822 here in RUclips, he actually found this solution and he also said he'll check this delay problem, I told him about the LED hack I do in this video. Hope its somehow solved as well. ruclips.net/video/RiucQMcivC0/видео.html
My unit hasn't arrived yet but if I experience this problem I plan to run it through a basic single-line loop switch pedal. Loop switchers redirect the signal chain and can be used to remove and reinsert pedals when engaged or disengaged. From there I can keep it on at all times and engage it with the loop switcher, avoiding the need to depress the Mini Universe's foot switch.
Did you get your unit yet and a chance to try your solution? If so can you provide details on how you rigged it up?
Thank you for your lovely information
I also have this pedal but 4 pins under the foot switch instead of 9. Would love to know how to do the mod on the 4 pin version.
They are now selling the second version of the mini universe, they fixed the clicking problem, the new version has significantly redesigned the board and removed the true bypass
Isn’t that bad? Is there now signal loss when in bypass?
1 is efx in and connects to 8 , 2 on indicator LED ,3 efx out
4 is input 5 ground 6 output
And jumper 7 to 9 this is common 3PDT footswitch diagram. But there are others look for 3PDT Wiring diagram
I´m gonna try as soon as I discover how to open it !!! kkkkk Thanks !!!!
I added 1M ohm resistors then replaced it with 2.2 k ohm resistors as shown but i noticed a drop in volume when the pedal was used compered to bypass mode. The effects pedal was used in front of the amp. Having tried it again through the effect loop it sounded better, by the way both resistor values removed the popping sound.
Sweet spot i have found was 22k.
Would the difference in resistor value 1M ohm to 2.2 k ohm effect volume when the effects pedal is on.
@@paulyates5092 it didnt affect the overall volume but the tonality just a bit for me. The lower the resistor is, the more treble Will be filtered. By the way, there is a workaround for both switch pop and delayed engage issues, i started a topic on diystompboxes.com and someone found a solution for that.
What to do when the pedal comes with a 4-pin switch instead of a 6-pin switch as shown in the video?
That is a 3PDT footswitch. Its comes with 9 lugs. and its common for bypass pedals
I need help with the same, could you know how to do it with a 4-pin board?
I also have this pedal but 4 pins under the foot switch instead of 9. Would love to know how to do the mod on the 4 pin version.
This reverb pedal needs tails! But fair enough for its price and can still be modded
very good man, will try the 2.2k, the pop is the worst problem. but did u find how to fix the delay without messing the led?
No bro, not yet. There's one guy named @isaquelima822 here in RUclips, he actually found this solution and he also said he'll check this delay problem, I told him about the LED hack I do in this video. Hope its somehow solved as well.
ruclips.net/video/RiucQMcivC0/видео.html
Can you explain to me what the delay is like? I have this pedal but I didn't know that this pedal has a delay problem.