My babyliss clippers move from right to left and I have to adjust them back to center after every few minutes during my cut….if I don’t it would cause big patches in my hair
How do you properly gap your clipper blades. I always a little movement when I tighten down the screws. Is there a tool out there for this like for the trimmer blades?
@@athff___illyzz I just tightened each screw a little at a time, back and forth. The blade moves less this way, but it still took a while to get it perfect.
@@ultimatesteve mm..yeah I tried that too but not as perfect as it was out of the box but I have a slight fear that I might cut skin..so yeah👍... Someone else in the comments had the same problem he said to bend the springs on both side the same...yeah gonna try that..maybe u should try it too..
Which clipper/blade combo (cordless) would you recommend for bulk cutting like the wahl Seniors. I cut hair at home and don’t want to spend that kind of money if there is something out there. I did get the Kemei 1986 because of you. 🙏🏿
@@premiercutts22 right but if you wanted to test the limits of it where would u go. ive seen you mention a legend blade or something to that affect I’m new to this so idk
Guy’s leave a comment of what you might need help with
What’s is your best clipper top 3 chinees
Whats is your best chinees clipper bro i want buy one
How to insert sponge in clippers please
Bro thank you so much!
I was so damn confused when the blades were shifting 😂
😂same
Thank you! First time bought a clipper and I am actually thinking if its really like that
I dropped my clippers last week and now the blade is wonky! Are they broke? I tried unscrewing the other blade to straighten it but hasn’t worked
Thank you for this. I was trying to fix my clippers but they don't need fixing 😅
My babyliss clippers move from right to left and I have to adjust them back to center after every few minutes during my cut….if I don’t it would cause big patches in my hair
How do you properly gap your clipper blades. I always a little movement when I tighten down the screws. Is there a tool out there for this like for the trimmer blades?
How to repair kiepe fuel When I turn on the clipper Does the movable blade move more to the left than to the right how i do?
How do you Zero Gap? Cutting Blade slants when leans to the right or left?
Thankyou so much! I thought my clipppers were broken, and that i had to replace them 😅
Just got my first 1986 today, so this video gives me piece of mind
Happy it helped
Been wondering why is been doing that so thank you so much 💯
Got the Kemei 1998 straight on with the wahl taper blade working like magic keep these videos coming brother saludos from sydney Aus 💈🇦🇺🇷🇸
Much appreciate
can you do a video on how to 0 gap?
I have one already on the channel u can’t miss it
my blade still moves even if it’s fully tight? does anyone know why??
He said it’s normal
i thought this was gonna be about the non moving blade being crooked/tilted.
?
@@premiercutts22 like one side higher than the other. when i zero gapped mine it took a while to get it level. tightening the screws moves the blade.
@@ultimatesteve I have the same problem ...i tried to zero gap em..did u fix it ? I have a 1986 kemei clippers...
@@athff___illyzz I just tightened each screw a little at a time, back and forth. The blade moves less this way, but it still took a while to get it perfect.
@@ultimatesteve mm..yeah I tried that too but not as perfect as it was out of the box but I have a slight fear that I might cut skin..so yeah👍...
Someone else in the comments had the same problem he said to bend the springs on both side the same...yeah gonna try that..maybe u should try it too..
When I close the lever and have a Guard on my Magic Clip get louder any Solution ☹️
🤷🏽♂️
Damn bro he didnt help. I had the same issue and ik its a year later but the gap is too close
Woah this guy it criminally underrated, subbed 4 life 🤘🏾
Much appreciate 🙏🏼
I have kemei 1996 and the blades its not alinned , in one corner is a bit higher
That might be how the bottom blade might be set up
Solved , it was spring tension , i bend one part and nou its alinned perfect , thanks
The corded ones doesn’t do this.. My corded magic clipper is a killer
What’s is your best chinees clipper at the moment and wish you prefer more ??
Haven’t use them all so how can I answer that?
Kemei 2010 or 1986 which one is beter
Thank you
Never use the 2010 so I can’t say
Which clipper/blade combo (cordless) would you recommend for bulk cutting like the wahl Seniors. I cut hair at home and don’t want to spend that kind of money if there is something out there. I did get the Kemei 1986 because of you. 🙏🏿
Those should do a good enough job with bulk cutting (1986)
@@premiercutts22 thank you 🙏🏿
How’d u mod the 1986
Don’t need to
@@premiercutts22 right but if you wanted to test the limits of it where would u go. ive seen you mention a legend blade or something to that affect I’m new to this so idk
Do a 2021 clipper line up or go to clippers
Will do 👍🏼
@@premiercutts22 CAN'T WAIT KEEP UP THE HUSTLE
Most annoying thing is how to to zero gap and align both blades perfectly?
I have a video on how to zero gap
Still waiting for the review of Kemei trimmer 5027 haha
Working on it
I think clippers with cam followers does not have that problem
Facts!!🔥🔥👍
💪🏽🤓
A real barber ALWAYS KNOWS his tools....🤦🏿
Yep but their are a lot of newbies out here and I’m here to help them as well
👍
👍