Cool. i need to do some readjustment on an Okuma LCS25. As I understand it, the X offsets are not put in the tool offset table but in a different place somewhere in parameters. i remember reading about it in the manual. First we need a co-axial indicator.
After loosing the Allen bolts, you jump to software settings. Are missing the physical touch to realign it? Need help our OKUMA LB15 turret has moved CCW after small collision.
What's the point of removing back Allen bolts? If you pivot turret only around x-z plane - could you explain what purpose it serves undoing those bolts of back cover? Couldn't you just loosen those 4 bolts that visible in vid, align and tighten
exactly and the camera is not even focused on the things he explains either.. like the explanation in the menu settings he points to things that are not even in vieuw
youre wrong though there is the three socket head capscrews that you see with the pins i would remove thiose there is TWO !!!!!!inside the aluminum housing cover you keep referring to and the ONE bolt at the left corner UP that's a HEX bolt too
There is a cone component on the head turning machine which has a length of 1235 and this mold has come 30 and has been drenched 226. Vibration is coming too much on it, how to fix it
Professional and to the point. Thank you.
Cool. i need to do some readjustment on an Okuma LCS25. As I understand it, the X offsets are not put in the tool offset table but in a different place somewhere in parameters. i remember reading about it in the manual. First we need a co-axial indicator.
Great Video! Thanks for taking the time to make this video, very helpful information on turret alignment!
After loosing the Allen bolts, you jump to software settings. Are missing the physical touch to realign it? Need help our OKUMA LB15 turret has moved CCW after small collision.
exactly what i was thinking
Yeah, I was like uhh fixing the X in the software ain't changing your Y location unless you tap on the turret in one direction or another.
Have you ever had to trouble shoot turret tool change issues after a boring bar crash into the turret base from sticking to far out the back?
have you ever aligned the subspindle rail?
What's the point of removing back Allen bolts? If you pivot turret only around x-z plane - could you explain what purpose it serves undoing those bolts of back cover? Couldn't you just loosen those 4 bolts that visible in vid, align and tighten
You can say it but need to show it too..
exactly and the camera is not even focused on the things he explains either.. like the explanation in the menu settings he points to things that are not even in vieuw
youre wrong though there is the three socket head capscrews that you see with the pins i would remove thiose
there is TWO !!!!!!inside the aluminum housing cover you keep referring to and the ONE bolt at the left corner UP that's a HEX bolt too
Very usefull video
great!
استمر شرحك رائع
Thankyou wonderfull video
4:42 what the hell ?
There is a cone component on the head turning machine which has a length of 1235 and this mold has come 30 and has been drenched 226. Vibration is coming too much on it, how to fix it
The turret rotation instructions are not correct