Видео

Professional and to the point. Thank you.

How do you get the machine to move that fast in manual mode? Our machine won't move without also depressing a safety switch so you have no free hands left. We do block the switch, no other way, but still it will not allow movement at more than 30 percent feed knob setting, if put higher the machine will give an alarm and cut out the movement. Thanks.

Cool. i need to do some readjustment on an Okuma LCS25. As I understand it, the X offsets are not put in the tool offset table but in a different place somewhere in parameters. i remember reading about it in the manual. First we need a co-axial indicator.

Great Video! Thanks for taking the time to make this video, very helpful information on turret alignment!

THAT'S NOT PROGRAMING? YOU ALREADY HAVE IT THERE. I WASTED MY TIME!!! YOU JUST RETRIEVED IT AND EXPLANED THE CONTENTS OF SUCH PROGRAM...WHY DON'T YOU TYPE A SHORTER PROGRAM AND SHOW HOW TO DELETE A LINE, A WORD, OR CHANGE A WORD???

Moving the table doesn't make sense to me. I don't understand why they made the machines this way, then made the manual so hard to understand.

have you ever aligned the subspindle rail?

You can’t hear you very good. Not a good video

This is a fantasic video tutorial to understand the basics. Thank you so much for this! HOWEVER, I wish you had a better microphone so that I could understand/hear you more clearly. Overall really great and helpful though! Thanks again so much.

Thank you for the education

Why do you move the table to -7 before shut down?

The turret rotation instructions are not correct

7:50 clarity on + vs - side of fixture for edge finder

What's the point of removing back Allen bolts? If you pivot turret only around x-z plane - could you explain what purpose it serves undoing those bolts of back cover? Couldn't you just loosen those 4 bolts that visible in vid, align and tighten

What .. can't here any codes ..

Line of insurance: 1:32

Hi sir Do you can help me how i can do BHC on my fadal 2016L. Thank you

Why wouldn't you just lock the chuck manually to change the jaws, etc?

4:42 what the hell ?

youre wrong though there is the three socket head capscrews that you see with the pins i would remove thiose there is TWO !!!!!!inside the aluminum housing cover you keep referring to and the ONE bolt at the left corner UP that's a HEX bolt too

Use the tool load utility... After you do all that work you still need height offsets and diametral ... Do it in one step instead of two.

Dude. Get a microphone!!!! Can't understand half of what you're saying so this gets a thumbs down from me.

You can say it but need to show it too..

I have never heard somebody refer to a coaxial indicator as a circle gage...

Well a great of teaching. Can u do more. From beginning to advance operation and maintenance included

Please never use a tool or turret as a stop to lock the spindle. Just hold an Allen key and the chuck and knock it with an mallet, or just use an impact gun to loosen.

After loosing the Allen bolts, you jump to software settings. Are missing the physical touch to realign it? Need help our OKUMA LB15 turret has moved CCW after small collision.

dude get a haimer and use option 4 - much easier...

Hello They could help me to confirm with their experience if it is normal for the spindle to leak air and also to be able to solve a fault that my machine is presenting. I have video where I show the details. My email is sicheredia@gmail.com thanks

Hello please help me I have okuma machine control is osp 500 L- G I need operation manual book Please send me my Gmail id is zamanmughal01@gmail.com

I have a okuma LB15 CNC lathe machine with OSP-100L control please I need operation manual book help me Send on my Gmail id zamanmughal01@gmail.com

I have a okuma LB15 CNC lathe machine with OSP-100L control please I need operation manual book help me Send on my Gmail id zamanmughal01@gmail.com

Thankyou wonderfull video

استمر شرحك رائع

How do you put this machine in low gear. Thanks for the video.

I'M A NEWBIE, older guy starting new job on Fadal. You saved my bacon, man.

Why didn’t you move in half the distance of the edge finder ?

thank you you for time to make videos

I loosened all of the bolts on it and it still wouldn’t come out

una pregunta cuando se va la luz me dise que tengo que poner cr y despues tengo que poner la posicion en ceros para que reconosca el zero pieza la maquina guarda el cero de la pieza? podria decirme donde buscarlo o con cual codigo por favor muchas gracias

why don't you need to input z on fixture offset

There is a cone component on the head turning machine which has a length of 1235 and this mold has come 30 and has been drenched 226. Vibration is coming too much on it, how to fix it

Dear sir can you share osp 5020L/osp500L-g alarm and error list book PDF file for me ?

Very good! It's been awhile since I ran old Fadal this was a great refresh!

I will be running a fadal 4020 in a few days after about 15 years without running a fadal. To go to zero is there no way to go into mdi and simply enter the codes? Normally on all other machines after pickup I simply type in g0 g90 g54-x0-y0 and hit start. If there is no way to use g codes in mdi--and instead I have to go to multiple pages and relearn all fadals pages of a totally different system I will be lost the first day. Another question is the relative page for positions when such as to pick up center of a block I sweep one side and hit zero on relative then jog over and sweep the other side and divide the total distance by 2--then g91 to go to zero and zero the axis. I then go g54--and rapid over the same distance to confirm the edge sweeps zero. Those things above to me ive used for decades and hopefully I can still do that on the fadal. By not using the relative page to hit zero I of course can always look at the position and move over and do the math--however that also will be tedious--hopefully there is a way to use mdi and simply zero the part in the normal manner instead of 20 pages of fadal specific stuff. It will be fine after a day or 2 anyway. to me the controller quirks of each machine mean nothing after a day or 2.

Me podrían ayudar tengo una fadal 4020 de 1993 y tengo muchos problemas para iniciar, yo he manejado para una compañía una haas 2011, pero es muy diferente de la fadal quisiera que me ayuden con un video subtitulado en español desde el inicio para poder iniciar la máquina y configuración de las alturas de las herramientas, los Cero Home de cada eje por favor ayúdeme estoy desesperado y no quiero des configurar la VMC por favor

Thank you for taking the time to make this very helpful video!

I just subscribed...Great videos... could you made one for measurements tools special for live tools on Okuma Lathe... Regards from Mexico

If it is broken, we can use this NC turret to replace it. cncmakers.com/cnc/controllers/Tool_Post_Turret/HAK32125_HAK32100_HAK32080_HAK32063_HAK3.html

Have you ever had to trouble shoot turret tool change issues after a boring bar crash into the turret base from sticking to far out the back?