Thank you very much I have looked at the traditional design and now you're slightly different design. I think you have done a superb job and thank you for sharing your wisdom of carpentry.
I was going to use a linseed oil, turps and a vinegar mix for the insides of the box, but never considered beeswax on its own. Might try that. Thanks for the information Mick.
Nicely done. In sizing the piston block how much space did you leave before lining it with furniture felt. The felt did not look very thick so I imagine maybe allowing a millimeter or two give on each side before adding it.
Hi Strahd,I left approx. 5mm around the piston, the felt was about 3-4mm thick. There is still some "play" around the piston which is fine. The amount of air that is still moved is more than enough.......then just line the box with plenty of beeswax...
Thank you very much I have looked at the traditional design and now you're slightly different design. I think you have done a superb job and thank you for sharing your wisdom of carpentry.
Thunder Fang no worries mate! No problem.... let me know how you get on.... cheers!
Dude, thank you thank you thank you so MUCH for your explanation. I've seen 5 different videos and this is the best one on how to make it.
Moe Chan no worries mate, all the best with your build!!
I agree with you.
Top job!!! I've looked at a few videos on these and what you've done is one of the best. Thanks.
Ru in Perth?
I was going to use a linseed oil, turps and a vinegar mix for the insides of the box, but never considered beeswax on its own. Might try that. Thanks for the information Mick.
Why do you need anything on the inside it should never get wet?i
awsome thanks.looks beautiful
Thank You great job
Top job mate!! Will be doing the same very soon for my forge
Nicely done. In sizing the piston block how much space did you leave before lining it with furniture felt. The felt did not look very thick so I imagine maybe allowing a millimeter or two give on each side before adding it.
Hi Strahd,I left approx. 5mm around the piston, the felt was about 3-4mm thick. There is still some "play" around the piston which is fine. The amount of air that is still moved is more than enough.......then just line the box with plenty of beeswax...
Nice video it helps a lot and did you make the side draft forge in the end?
Its Fuigo, not Fuego. It means pair of bellows.