Yours is one of the top knife channels on YT…great production values, great knives, breadth of knowledge, pleasant voice ( unlike the RUclipsr with the affected cartoon voice and mask to match). All tops! Keep up the good work.
Нож замечателен!👍👍👍.Простота обслуживания, а главное толщина клина 3, 3 мм , и шайбы! .А то уже замучили эти (подшибники ).Нож который предназначен для реза, толщина клинка самое то 😉, а то на большинстве ножей, толщина лезвия 4 мм, а то и больше это перебор. (...Это -же не тактик)
Custom, production, semi custom.... regardless, they obviously have some tremendous talent and machining skills to produce such an impressive knife... I want one.....
I count myself extremely lucky to be the owner of the 007 chest. I agree with your assessment to the T. Altho mine for the most part is a plain design the knife is incredible. No flaw anywhere whatsoever. Amazing knives can't wait to hop on there books for a svarn as well
Given a choice with all else being equal, that is: same quality, brand, design, materials, whatever - I’ll always take bearings over washers. In fact, I’d even go so far as to sacrifice weight, effectiveness, and efficiency, if that’s what it took to get bearings.
Аwesome knife! To all who are interested, CultroTech will be exhibited at the Blade Show 2018 table 32A (P.S. why all good knives from Russia compare with shirogorov?)
Idc about packaging when it’s a production knife under 200 bucks but anything over that should at least have a microfiber pouch or something similar at the least
Hey Jim! I'm a long time fan here and you inspired me to make my own channel soon with my own collection. May I ask where do you get the carbon fiber backdrop you have? Awesome knife btw Thanks Dankknives
i hate deep carry clips because i think the designs of them are usually not integrated well with the rest of the knife but this cultrotech is an amazing and ingenious exception. WOW
Порадовало исполнение деталей, сблизи всё отлично. Особенно как сделана шейка для темляка, на фотографиях не обращал внимания. Да и форма карбоновых деталей на фотография не видна была. Именно сочетание верхней и нижней "фаски". А вот техноузор на вставке как-будто смущает, нет ему оправдания чтоли, как на широгоровых непонятно для чего))) но хорошее место для поиграться)) например сделать лабиринт и гонять в нем шарик)
"Included Packaging". Make no mistake, the consumer is paying for all these extras in the overall cost of the knife. Ive always been of the opinion of "give me less stuff and make it cost less"
I don't know how much this knife costs in your country, but believe me, all these additions cost very little compared to the cost of custom quality. The whole point of this knife is in its blade and heat treatment.
Nah man, they are super thick washers with milled pockets all the way around. If you are on Instagram I could post a pic of it for you to see. That_sebenza_guy shoot me a message and I'll show you what the internals look like
CBI Knives Target for M390 is 60-62 which is already quite a variance. Pushing to 63 may not sound like much, but it is. “Insanity” may not have been the best phrasing, but it is on the top end of what this steel is made for.
JrFreak They’re not. One sits in the slot up top, and while the other one sits down with the knife, the knife came wrapped in the cloth. You’ll notice in the closeups, there wasn’t a mark anywhere on the knife.
Yours is one of the top knife channels on YT…great production values, great knives, breadth of knowledge, pleasant voice ( unlike the RUclipsr with the affected cartoon voice and mask to match). All tops! Keep up the good work.
Love the polished stonewash on the bevels as well as the very nicely polished carbon fiber. Very cool knife indeed with great f&f 👍
Нож замечателен!👍👍👍.Простота обслуживания, а главное толщина клина 3, 3 мм , и шайбы! .А то уже замучили эти (подшибники ).Нож который предназначен для реза, толщина клинка самое то 😉, а то на большинстве ножей, толщина лезвия 4 мм, а то и больше это перебор. (...Это -же не тактик)
Custom, production, semi custom.... regardless, they obviously have some tremendous talent and machining skills to produce such an impressive knife... I want one.....
I count myself extremely lucky to be the owner of the 007 chest. I agree with your assessment to the T. Altho mine for the most part is a plain design the knife is incredible. No flaw anywhere whatsoever. Amazing knives can't wait to hop on there books for a svarn as well
Wow that looks amazing.
Just perfect done! Both the knife and the video!
Cultrotech красавцы! нравится мне их стиль!
Ppl now days think bearings r the only way to go
Not true when washers R done rite
I prefer washers when done rite for a EDC knife
Good video Jim👍
Given a choice with all else being equal, that is: same quality, brand, design, materials, whatever - I’ll always take bearings over washers. In fact, I’d even go so far as to sacrifice weight, effectiveness, and efficiency, if that’s what it took to get bearings.
Super cool review, thanks ! I've been following them on IG for a while. Nice to finaly know more about them.
Аwesome knife!
To all who are interested, CultroTech will be exhibited at the Blade Show 2018 table 32A
(P.S. why all good knives from Russia compare with shirogorov?)
Денис Shirogorov is the gold standard from Russia and some of the best flippers in the world.
That’s interesting to look at ... great piece! There’s definitely great stuff coming from that side of the world
after seeing this review, I have put my name on their list for their new Zhim knife..
Hocking isn't that what all the cool kids do now a days 😂. I def need some of these this look amazing!
Great knife! Awesome review!
Idc about packaging when it’s a production knife under 200 bucks but anything over that should at least have a microfiber pouch or something similar at the least
Wow! Nice video, Jim !
Hey Jim! I'm a long time fan here and you inspired me to make my own channel soon with my own collection. May I ask where do you get the carbon fiber backdrop you have? Awesome knife btw
Thanks
Dankknives
i hate deep carry clips because i think the designs of them are usually not integrated well with the rest of the knife but this cultrotech is an amazing and ingenious exception. WOW
Порадовало исполнение деталей, сблизи всё отлично. Особенно как сделана шейка для темляка, на фотографиях не обращал внимания. Да и форма карбоновых деталей на фотография не видна была. Именно сочетание верхней и нижней "фаски". А вот техноузор на вставке как-будто смущает, нет ему оправдания чтоли, как на широгоровых непонятно для чего))) но хорошее место для поиграться)) например сделать лабиринт и гонять в нем шарик)
dimazzio спасибо, тех узор это элемент дизайна, будут и другие.
Stunning
Beautiful.
Awesome blade. I could see something like this with your logo on in at some point in the future 👍
amazing! i must get one :D
Nice stuff from Russia , really reminds me of a WE Knife .
Oh man, WE doesn't have anything on the guys at Cultrotech. These guys are on another level of perfection.
Beautiful knife, quality much better than Shiro, and it is on washers))
beautiful
9 dislikes please write why? Jim makes great stuff
Shirogorov Levels:
- 1 Bear
- 2 Bear
- 3 Bear
- Custom Division
- Custom Collaboration
Hey Jim got a quick question what's your opinion on D2 steel?
Russians love their 4” blades. I love Russian blades
Is it possible to get blue balls from a knife?
I think I will buy a Walther PPQ sf with a trijicon SRO instead. Too rich for my blood, my $$ limit for a knife is 400-500.
"Included Packaging". Make no mistake, the consumer is paying for all these extras in the overall cost of the knife. Ive always been of the opinion of "give me less stuff and make it cost less"
I don't know how much this knife costs in your country, but believe me, all these additions cost very little compared to the cost of custom quality. The whole point of this knife is in its blade and heat treatment.
how do you do a mirrored stonewash?
Niiiiiiice!!!
Cost?
Truth Truth Noted in the video. More than once 👍
No jimping on the flipper tab...say it ain't so??
Sling52 probably doesn't even need it with that precise of machining. at that price if the detent isn't perfect id be surprised
I'm gonna drill the dice and use them as lanyard beads
All the Svarn II knives on his IG have bearings, that's weird.
Andrew Delashaw That's wrong iimpression. Those are custom made washers with blind drilled pockets ;)
Nah man, they are super thick washers with milled pockets all the way around. If you are on Instagram I could post a pic of it for you to see. That_sebenza_guy shoot me a message and I'll show you what the internals look like
No jim,m390 at 63HRC is not insanity,1084 at 67 HRC is insanity. It's harder than usual but not insane.
But the knife is great
CBI Knives Target for M390 is 60-62 which is already quite a variance. Pushing to 63 may not sound like much, but it is. “Insanity” may not have been the best phrasing, but it is on the top end of what this steel is made for.
Jim Skelton With that I can agree
Not a big fan on how the dice are free to rub up against the knife.
JrFreak They’re not. One sits in the slot up top, and while the other one sits down with the knife, the knife came wrapped in the cloth. You’ll notice in the closeups, there wasn’t a mark anywhere on the knife.
Pray tell, who makes magical dice that costs more than a hundred dollars?
Microtech custom ones.
Google is your friend. You’ll find several.
Jim is World of Watches legit?
How can buy？
marcus chan His Instagram handle is in the description. Shoot him a message on IG.
custom division
Boo it's on washers! Wait there's nothing actually wrong with that.
They should be loaded dice
Should of said.. would of been cool if he loaded the dice
63 hrc is not insanity especially with m390...