Two Easy 240sx Upgrades that Look SICK!
HTML-код
- Опубликовано: 8 сен 2024
- Rather minor "mods" if you even want to call them that, but I've been looking forward to getting Nicole some good brakes for a while now - end result looks great! I also finally installed my new valve cover from Colorado. FIRE SALE ON ZIP UPS AND PULLOVERS - LZMFG.COM
Didn't mention it in this video, but I decided against CTSV calipers on her car because of fitment issues. Little did I know that Z32 calipers would have the same problem if not worse... You live and you learn!
Regarding the loose studs... For some reason they don't fit well in those hubs (they are brand new studs). Alberto had tac welded them, but most of the tac welds broke. I have other hubs, but they're at the warehouse so I was planning on getting those another day!
Subscribe to me and follow my 2js 240sx build! :) adams motivated me alot for youtube as well as my car!
Leave valve cover the way it is!!!
Adam LZ ohh ok.... leave the value cover how it is... it cool and it's would mean more...
Adam LZ I was going to say "give it away, sign it," but then I remembered all of the weird broken or replaced parts I have for my car and how much I was told to get rid of them and didn't listen. Like how do I so easily get rid of the rock that say behind my driver's side headlight for 6 months until I got a new set of headlight assemblies..... True story, and my god was it a real talking point whenever I showed someone my car
Adam LZ hey you should keep your valve cover and hang it on your wall
Can't wait for you guys to go to japan again,really interested in the chaser.
1 more month!
Fr4g R4Z0R cresta*
You need a greddy intake manifold. That will clean up your engine bay so much!
They sacrifice low end torque for high flow HP. I agree, but I'm actually trying to shift my power curve down lower - so much so that I'm actually going to go back to stock cams.
subscribe to me and I will sub back. anyone is allow just comment when done!
Lifetime Hacker fuck off
hypertune
Adam LZ get higher lift cams
#FindBigBoostALadyBoost
Papa Meech hahaha at LZ calling him out for creeping on Emilia Hartford
Leave it as is, sign it, and send it!
A+ for color matching the caliper letters to the car!
leave the valve cover weathered, it makes it way more aesthetically pleasing
Bartoes 6902 . Says a guy with trump photo...
... It's the truth tho, excuse my profile pic
Gabrielius Masionis what the hell?? What’s his profile picture got to do with his comment? 😂
I'm almost 29yrs old and I enjoy watching your channel along with haggard, ricermiata, gingium, jimmy oaks and others, the point is all of you have one thing in common you like working on cars and I wish I had friends like that.
At the start: "Z32 brake swaps are child's play"
At the end: "Z32 brakes are annoying and make wheel choice difficult"
You spoke too soon.
When big boost gets caught watching Emilia Hartford's bikini drift challenge. 🚨
I agree with Nicole about the valve cover. But instead of giving it away, make a display for it on top of the garage tool doors
You need to put the valve cover seal into the groove in the valve cover, if you just lay it on the head and put the cover on top there is a good chance the seal won't sit in the groove and will just be squashed or pinched; then you'll have an oil leak that could cause a fire. If it keeps falling out of the groove when you're fitting it, just use a few spots of sealant to stick it to the cover.
should rebuild the q45 calipers. They don't look as nice as z32 but I can tell you from my car, rebuilt old q45 calipers all painted up look decent and stop awesome, just as good as z32 in terms of raw stopping force. Plus they fit with any wheels pretty much
Adam Humble i agree all the brake force of z32, and way easier to fit wheels without caliper clearance issues.
alberto has bags under his eyes... this good becuz he ovbiusly changing the e36 engine and we will get a video. respect man
That valve cover in instagram???
Dude you have come so far. From just a kid thrashing the streets and the park to a full blown massive company and an awesome house with all the toys. It's been sick watching you on your journey.
Big Boost has a lady crush???? Amelia Hartford????
check out her channel. she's cool specially her most recent vid.
just wish it was her in the passenger seat not that fakeness
Shout out to Big Boost and Adam always putting out good videos 🤗
he gonna hit that 😤
Do a collab!
I like how it looks now, it has a lot of stories to tell and the patina makes it unique!
Those forearm gainz😍😂 2:35
240sx looking fine as always
Studs are not supposed to be loose like that.. shoulda at least tapped them back in from behind, not good, valve cover looks killer though
Engine bay with that new head gasket looks awesome and it makes car look that better
SHOUTOUT TO Emelia Hartford
Iceyy Stunts eyyy
Lubricated threads transfer torque from rotational to clamping much better, so the 100ft lbs you put on the nut can act like 150 or 200 with lubrication. You can stretch studs much easier than you think and cause a failure.
HOLY MOTHER OF JESUS CHRISTMAS This is like my dream garage with those cars 😤😤
KEEP IT AND HANG IT UP SOMEWHERE ITS BEEN WITH YOU FOR YOU PROGRESS
Leave the valve cover weathered
Definitely leave it weathered, it tells the story of that car and motor
Only clean it, leave the color...
byGiNeSiToX Bananas
No don’t clean it it’ll wreck it
The s15 already looks good af cause the wheels!😍
DADAM LZ BACK AT IT AGAIN WITH ANOTHER VIDEO
It's actually really cool that you and Alberto both work on your cars together at your house
7:51 DEEZ NUTS
Screw your old valve covers to your garage wall. Would look pretty cool and a nice reminder of the fun you've had
Leave it! It has history u know
no one really knows how amazing adam is he helped so many people start their youtube career and that’s a big thing. hands down amazing guy
You have to leave the valve cover weathered. Repainting it would get rid of the aesthetic and its history
So awsome to see Adams transition of sucsess from a kid to now its crazy glad to see your doing so good in life and keeping us fans with you the whole ride with you keep it up man congrats on the maridge
Leave it and sign it
Adam - most auto part stores have some razor blade tools that make it way easier to remove RTV and gasket maker. Just an FYI. Good luck!
I think you mounted the rotors the wrong way. You have the right ones on the left side and the left ones on the right. The slices on the rotors should look like a sawblade. It's no big deal but just for next time.
It all depends on the veins on the inside, you want the air (for cooling) to pull from the centre if it's on backwards it will cook the rotor because the veins won't pull the air through
Luke Duffy yeah I saw that. That's why I said it's no big deal. It's just better for cleaning the pads.
I love it how the old valve cover was nice material valve covers not like today all plastic stuff..
I’m so excited to turn 16 so I can get a car but I forget that my parents don’t have a garage
I like how there was oil by the plug indicating a bad gasket and it alarms you, yet you keep the old gasket.
didn´t alberto fix those wigly wheelstuds?
Perfectionist that doesn't put cardboard down when your clear coating calipers in the driveway
These NUTS, gottem
Hey adam, I just want to go head and say I am real excited for the 2j s15 build I think well I know it'll be amazing. Can't wait for the color!
Don't touch the value cover leave it dirty
Love watching Adams vids coz for people who don't know a lot about cars can actually learn something instead of watching boring how to"s an stuff
Did anybody else see that one wheel stud just flop? Should probably fix that lol
Nicole sideboob at 9:02 woo woo new valve covers and sick brakes
Leave ittttttt weathered man more sentimental
I agree with Nicole! Leave it as it is Adam and sign it. Would be a rad little giveaway
4:16 does anyone know if spacers like these will damage the wheel bearings, or the spacers that you tighten down like the black one he had
RifleRud why would they damage the bearing? Shouldnt have any impact on the bearing!
Sean Rafferty will it damage anything at all, here in my country these spacers are kinda hated
New Value cover looks really good nice good.
are you guys going to go put pa pittsburgh
They really need to make a trip up here!
That thread tip is so helpful tbh I never thought of why every time I took off lug nuts they ended up a little rusty
Nicole living that no-bra life 8:21
Wietze Buwalda frr tho thought no one saw it
Oh don't worry. I definitely saw.
Wietze Buwalda Thats definitely a bra unfortunately
nerds
flumbo Im not a nerd, just trying to crush these 12 year old's dreams
Hi Adam
I personally think you should sign it as Nicole suggested and spray clear over it as is, think the wear on it is iconic as it comes a long way with you
enjoy :)
if you giveaway that valve cover im putting it on my sr
I just bought a red hatch last night, I can't wait for my s13 sr20 🙌
Who else loves alberto
That new cover really ties in the "cream theme" keep up the great vids! Lovin' what you're doing.
Nice shoutout to Emilia Hartford !! Don't be a hater like TJ
Party Animal seriously, she is more awesome than tj could ever dream to be. I used to be a fan of tj being a fellow san diegan, but lately he just buggs.
What happened with Emelia and TJ? I'm honestly out of the loop lol
What did I miss
Klas Kitsune that's what I wanna know
adam you better be getting paid well. I just watched a 30 sec ad with no skip button. i dont mind as long as youre cashing out
Leave it dirty😂
I just bought merch from your store for the first time! I'm so excited:):):)
Put the valve cover on your toilet lol
The calipers came stock on 300zx z32's as well. I love mine they work amazing and look sexy
Adam dont drive like that the wheel isnt centered on the hub with thies spacers!
you should paint the nuts and washers for the rocket cover the same brown as the engine bay, they will stand out more and look nice
Try to buy a completely stock R34 GTR! Would love to see it on the channel, it's super customisable and an awesome car!
Anonymous he already has several projects hes busy on. A R34 wouldnt be a good idea right now
Id rather see him buy a 4 door 32
4 doors for more whores.
Do you get an extra rear seat with 4 doors? Lol
Rick Chrisiansson no you tend to get more doors though
Keep the valve cover war torn and weathered! It has amazing story’s to tell with it!
Valve cover looked better red
S4S?
it doesnt fit with the rest of the engine bay tho imo, i like the cream one a lot more!
Cream valve cover looks super sick great job painting it Adam!!!!
na
Adam didnt paint it ?
anti seize will also help slow down mixed metal corrosion between alloy lug-nuts on steel studs ... can be quite dangerous if the lug nuts are not often removed
Red cover looks better
KAL 1 ayyy Kal what’s up - btw I aspire to be like you.
Regarding the anti seize on the wheel studs, you really should not put any form of lubrication on them because the oem torque specs are based off of a dry clean bolt. When you put anti seize on, it makes the bolt easier to turn and thus doesn't need as much torque to be tightened to the same degree. Over torquing of bolts can cause the metal to stretch, over time reducing its ability to be tightened properly, and in some cases causing the bolt to snap. Probably not a huge deal for slight amounts of over torquing but it is not common practice to do so.
What are you doing in the bed 😏
Hey Adam i know your probably super busy and won't see this buy you need to keep your valve cover for your self it's something special and meaningful to you! Fellow fans please like this to get it to the top so he will possibly see this
Paint the valve cover green, and give it away.
no
I'm all for spacers if they're safe. I run 2 1/2 inch spacers on my truck for over 2 years. Checking them once a month and have no issues. But non hub centric, non bolt on thread spacers are hella dangerous. That's sketchy for you Adam, but you take that risk. I'm shocked you'd put those on her car.
PBM is probably the only manufacturer on the market who would advise that. While big boost isn't wrong about it assisting in a stuck wheel situation, or frozen lug situation, the thin amount of never seize used still throws off the clamping force rating that goes hand in hand with an OEM Torque specification. And here I was thinking this TIA certification was never going to be useful in conversation. 😅
I think you should do a clear coat over your old valve cover. It would preserve the weathered/worn look.
Leave how it is it shows the history it has which is really cool
LS swaps look sick!
i think you should keep it for yourself adam cause its been with you for ever! and clean it up and hang it on the wall also u need a greddy intake to clean up your engine bay!!!!
Cream 240 looking more mustard! 😂👌
Ahhhh, all of the cars are soooo sickkkkk
New valve cover looks awesome, also the jam nut on the tension rod looks like it backed off, might wanna double check that!!
Keep how it is so it shows the history
That Mini Cooper S never sees the light of day anymore I swear lol
Keep the valve cover weathered and SIGN IT! I want it!!!
50k likes. Adam does a giveaway with his signature and Nicole's and big boost and the rest of the team!
You sprayed directly on your Paver driveway!!!! lol ADAM! :P
Leave it battle scared man! Gives it character
You & Jimmy O stay working on brakes in the vlogs LOL xD
Valve cover looks clean
The valve cover giveaway would be pretty awesome I think it should just be left the way it is and signed by Adam
@2:27 Caster rod's "locknut" (dont know what it is called) is not screwed towards the adjust part... I know that as long as it locked in just one end it won't adjust itself. But it makes it stronger when it is tighten in both ends.