Looks good! You should like it. My electric bill has never exceeded $72 all summer and that is in the wake of the utility price increases. One thing I found is these do great keeping the humidity down. The lower fan speed and low evaporator temperature pulls a lot of moisture out of the air in summer. In winter, you need to put a fan low to the ground and blow the cold air up to the ceiling so it heats better or get the external thermostat.
Yes! I need to include that in my next video on this subject which will be about living with it a few months down the line. I need to get some cooling pics now since it will be winter then, but the clear condensate tube has a continuous flow in hot humid weather. We will get a little warm spell in a few days. It really has been a mild summer up here, with a lot of sunlight blocked by Canadian smog. And I still have to RTFM. Didn't even have to relocate my pedestal fans, just a 180 and tilt reversal.
IMPORTANT NOTE! Had I chose to use the left rear hole in the template, as opposed to going straight out on the right rear, I would have had the same issue affecting others. The connectors would have been right where the bend in the tubing would have to be to exit there.
ANOTHER IMPORTANT NOTE! Had I NOT used a torque wrench, tightening by feel, I would not have torqued them quite as tight as specified! Too much torque could also be a disaster.
Yes, subscribe, there probably will be a couple updates by winter's end. I have the lineset all dressed up now, I don't trust that white foam to the weather.
Looks good! You should like it. My electric bill has never exceeded $72 all summer and that is in the wake of the utility price increases. One thing I found is these do great keeping the humidity down. The lower fan speed and low evaporator temperature pulls a lot of moisture out of the air in summer. In winter, you need to put a fan low to the ground and blow the cold air up to the ceiling so it heats better or get the external thermostat.
Yes! I need to include that in my next video on this subject which will be about living with it a few months down the line. I need to get some cooling pics now since it will be winter then, but the clear condensate tube has a continuous flow in hot humid weather. We will get a little warm spell in a few days. It really has been a mild summer up here, with a lot of sunlight blocked by Canadian smog.
And I still have to RTFM. Didn't even have to relocate my pedestal fans, just a 180 and tilt reversal.
IMPORTANT NOTE! Had I chose to use the left rear hole in the template, as opposed to going straight out on the right rear, I would have had the same issue affecting others. The connectors would have been right where the bend in the tubing would have to be to exit there.
ANOTHER IMPORTANT NOTE! Had I NOT used a torque wrench, tightening by feel, I would not have torqued them quite as tight as specified! Too much torque could also be a disaster.
Hi very nice job, when it gets cold outside can you do another video to show how it is performing on heat pump
Thank you
Yes, subscribe, there probably will be a couple updates by winter's end. I have the lineset all dressed up now, I don't trust that white foam to the weather.
Flair or flare? I had to look it up, turns out either spelling can be used for this shape.