First Time Driving the 4j Swapped Nissan Patrol! SOUNDS AMAZING!
HTML-код
- Опубликовано: 29 апр 2023
- #build #4x4 #offroad
Driving the 4jj1 Patrol for the first time after an EPIC job done by King Fab Kustoms! BIG TWIN Surprise & a whole lot of insane turbo noises this episode ticks all the boxes!!
The build has been taken to the next level by King Fab Kustoms with a 4" Intake, 9" pod filter box, Twin 4" seamless snorkels, Seamless intercooler pipes & an insane dump pipe! Safe to say im not missing the zd30 life
Merch: roamlyfe.com
INSTAGRAM: Roam_Lyfe
tags: build cost 4wd how to build a rig lift patrol cruiser suspension building offroad overlanding custom ute flat bed tray superior engineering suspension travel flex huge lift remote res coils built build how to fit flexy down travel 4j 4jj1 4jj3 patrol swap gu gq how to build motor swap fabrication intake tune exhuast 
Авто/Мото
That fab work is literally next level. Bloke deserves an award
Bruh, Matt is a legend and so talented! Highly recommend him for any work hey!
Agreed looks unreal 👌🏽👌🏽
Mate the work you've put into this is a credit to you. Coupling this to work & family must have been a struggle at times. Congratulations to you, here's to many years of happy 4Wd'ing! 💪✌️👍
It’s been very challenging 😆! So glad I’m on the ass end of it now tho! Bring on the trips!! Cheers for watching 👌
That’s gotta be the cleanest patrol I’ve seen! You’d gotta be stoked with that mate
" my brain wigs out if something is off centre" still has off scoop in bonnet 🤣😋
Don't be dissing the standard 4j pidgeon flutter 😂😂
Love the rig mate! Coming up so good!
been watching this build from the start. all i can say is OMFG! what a WEAPON! 100% BEST PATROL BUILD ON RUclips!
Mate that’s bloody awesome keen to see her tuned up now
Getting keen for the tune that’s for sure! 🔥
Best sounding diesel I have ever heard in my life.... 6bt has entered the chat lol
Maaaate!! This build is awesome! Stoked for ya and the dual snorkels look minta!!
nothing like the sound of blowing raspberries into a pedestal fan mixed with injector rattle haha
Gday, the pipe work goes to show the pride that’s gone into the job, it looks shit hot and as for the twin snorkels I’m normally not a fan but this one I like, when the visor goes on it’s going to set it off just right, top job, cheers
Sounds insane, awesome work
That flutter 👌this is goals! So good
The twins are sooo spicy looks absolutely mint. Fab work looks so clean with the seamless 👌🏽
Great work yet again that turbo omg love it ❤😮
Love the twins mate rig look bloody awesome 👍👍🍻
Been following this journey from the start, sick to see it finally on the road 🤙
Thanks for watching dude! 👌👌
Solid content and work on that 4j! 💯
Sounds soo good man I can’t with it 😍
Awesome build,love it 👌👍
Looks absolutely mint mate 😮💨😍
My young fella got dual snorkels for his gu from kingfab. Matt is the man when it comes to fabrication
4jj1 is goals for my gu once i do the ol' ZD
It sounds beautiful and looks the goods, nice job
Cheers Clayton!!
Amazing content bro
Up the 4jj.
Awesome work it looks good
loving the twins
THANK YOU FOR GREAT VIDEO
congrats on your Patrol build 🤙🛻📹😎
That’s sick mate
Best patrol ever seen
Looks good, I reckon you have it by the short and curly’s now. Not long left
I’ve been watching since you got Coal. This is absolutely insane to see. Going to be hard to top this build.
Coming along sweet .
Fully sick bro.
Lol nah sounds f$&king awesome.
The wife will be excited to get her car back as well lol.
Truly curious to see what scoop you elect to go with.
I'm keen on the colarodo style myself, but you mentioned you're moving away from that.
I may see if a Jackaroo 4JX1 scoop works myself.
I had my ZD30 tuned by East Coast Performance Tune, the standard ZD30 turbo sounds mint when i back off, fluters just as my old D4-D V8 did and the Troll goes as hard now as that D4-D V8 did, but bear in mind the D4-D is not tuned to perform, even though mine was chipped.
Hope your efforts are rewarded well, i couldn't go through with all that effort myself. Have to say, im truly impressed how well my ZD30 goes now after East Coast Performance Tune fitted Cross Country intercooler, Tillix boost control and ECU tune, 779Nm at rear wheels is nothing to be sneezed at.
Totally different vehicle to drive now, as yours will be.
Farrk that’s insane
Awesome stuff mate
Thanks mick!!
I really love your content, I like the way you present your episodes, & I'm really happy that you're so stoked about the build, but the music(???) is doing my head in! Can't you play some Waylon Jennings, Dave Allen Coe or Johnny Cash instead?
Good stuff mate 🎉
Thanks Riley!
This build is mint, just wondering what year is your patrol?
Well done once again 👌👌👌👌
Thanks guys 🔥🔥🔥
Tom Mate, as an Isuzu technician and Isuzu driver this brings a massive smile to my face haha.
Got my 2015 Dmax straight piped and the turbo whistle is soooo good but she also pigeons real hard which is also hot haha. Love the build
Epic mate should post some content for us dmax lovers or even just a few things we can all look into
@@abecaisley2293 might have to hahah, will have to get some videos of it 😂
Dam impressive 👏
Surely plumb both snorkels to the air box, think of the intake noises
Love that 4j rattle 😏
Wish I could afford to do even half the job on my patrol😮
Twinnys look mint
Love it
How much bigger is the air box for twin snorkels?
Love the twins 😊
Me too!!!
It sounds ok for a 4 Banger haha
Hey what radiator Hose is that ?
Sounds sweet
Thanks legend!
Unreal fabrication work. And I love the look of twin snorkels - the wank factor disappeared the moment you said you’re actually going to use it for something (not just looks). Question - what wheels you running?
It’s a bit wanky I admit but I personally love the look of them! They are enigmas
Damn lovin it bro 🤙🤙🤙 stutututu
Can’t get enough of that noise in my life haha
I order my snorkel long time ago and they did a good Job 🤙🤙🤙 I love that twin snorkel look 🤙🤙
@Roam Lyfe surly you do a big beach Crouse at bribe when its on the road
Hows the EGR going?
Good to see it running, some sweet fab, 2 snorks? Like a face with two noses bruz.
But if yas like it it's your car 🤙
So tidy 🤝🤝
What turbo is used?
Those pipes look so clean, I thought they were mandrel bent.
Twins baby’s !!!
Twinning 👌👌
Looks and sounds amazing mate can’t wait to see the trailer being towed around on trips with the family 👍🏼
I’m saving up to get myself a GU with the big boy TB48 and the first mod is a turbo kit
Mate nice build, but you need to lift your radiator up so the top hose is uphill from the thermostat....so all the air can escape.
Alpha tech with a two step would be siiiccckkkk
Nissan 💪💪💪💪💪
What was the cost of it all I love Ur wheels
Diesel should apply for an apprenticeship with the legend 😂
How do u make is dose
I came from Instagram, and happy to have you here too
Very nice build!
What auto box you running?
Built re4 with a compushift!
looks good sounds like a hilux
What’s reason you’ve gone auto mate?
What was the investment $$ in replacing te engine, I mean the entire swap, cheers from EUROPE
Seemless/ mandrel bent is definitely the way to go
I always hated the look of lobster back welds they just look messy to me
It’s so much neater hey! He’s done a mint job!
Wait till you hear a Toyota 12ht auto flutter 🤤
Nice work mate! Curious what happened with the Navara?
He sold it to a mate ages ago
Yeah I sold it ages ago to get our house!
You should get a single centre scoop. Or a non turbo bonnet. If your brain can't handle offset things lol
Put a TB48 bonnet on and get rid of the off centre scoop
Frothing, makes me wanna build another patrol. Well done man 👌🏻
Does that mean your gonna put a bonnet scoop on the other side to keep it symmetrical?
😆😆😆 that one’s coming off and new one is going in the centre! 😆
👍🔥
Time for a new paint Job now! I vote matte black😎
I need to destroy this paint first 😆
Current paint still looks really good
"It's all back purged tig welded" cut to b roll of tig and no back purging hahaha
Seriously though, great looking build. Going to be a shame when you take it through your first gritty bog hole...
Hahaha it’s the only clip I had of him welding! That was Matt making the “sex pipe” 😆😆
@@RoamLyfe Ah! The sex pipe! I was wondering why it was bent to the right!
Why you running a MAF when you would be running an aftermarket ECU with a built in MAP ?
Someone put that on a loop
Just sounds like a standard rattly diesel with a turbo whistle
You’ll have to get a 48 bonnet and get rid of that offset scoop since your a symmetrical boi 😉😉
Got other plans for a scoop! 🤘
@@RoamLyfe keen to see it! 🤙🏽
Surely you've gotta black that grill out brah
What a shame I'm in Melbourne would get him Todo my exhaust
Best ever?... Look up the 1VD-FTV LOL
Symmetricalness??? You mean symmetry?
Am I the only one who was hoping that they'd dry the water off rather than letting it air dry 😅
sad to see it for sale so soon
It is not for sale?
People whinging about nissans factory bonnet scoop location 😅
😆😆😆
LOL - bonnet scoop isn't centre...
New bonnet scoop is coming 😆
Scoops go where ever your top mount intercooler sits ya pleb
Clearly you’ve never heard of an 8v71 Detroit! 😅
Factory fte sounds better
your bonnet scoop is off-centre.... wig away.....
It’s coming off very soon!
That corrugated top hose is too high AND they don't handle much pressure. Piss it off before it lets go and cooks the engine. Sounds just like a Chamberlain tractor!
This will be changed to a tig weleded stainless pipe!! This is just a temporary hose!
Twin Stainos = wank factor
Triggered with one snorkel, and off centered. Mate look at that bonnet scoop it’s just off to annoy any one 😂
😆😆😆 yes the bonnet scoop is going in the bin very shortly! I have a 4j collarado scoop here but I’m going to run a different one I think!