That GTI looks pretty clean! (The curb rash on the left rear, ouch!) I remember getting my MK 6 GTI 10 years ago and wanting to a bunch of performance and cosmetic mods but I ended up trading in for a MK7.5 R. Nice vid, brought back memories!
Really helpful video. Quick question about the side splitters, what length self tapping screws did you use for the front two holes to replace the nut inserts?
Hey guys I ordered & installed the full kit plus accessories on my Vw GTI Mk6 - of which I am beyond pleased with but I wanted to point out that I noticed the demonstration in the video when attaching the side extensions is not coherent with the written instructions. Specifically the arrangement in the (A) Fitting kit. The gentlemen in the video states the arrangement should be bolt, metal washer, star-lock washer, and then rubber washer. In the instructional fitting diagram it specifically instructs bolt, star-lock washer, rubber washer, and then metal washer last. The ONLY reason I’m pointing this out is because some people could get confused and assemble the extensions wrong. I hope in some way this has helped. In conclusion I’d like to point out that Flow Designs is an ABCD type of business… they go above and beyond the call of duty, in every aspect. The superior quality product they provide is 1 in none & for anyone to be dissatisfied would be baffling. Flow Designs truly, genuinely separates themselves from the mass majority of other products alike. I fully recommend Flow Designs 💯 You can’t go wrong. Check em out. Thanks again guys, I’m stoked on the fit & look. You can expect I’ll be back. Until then… ✌️
is there any danger that, when breaking through the rear bumper with the electric screwdriver for the diffuser, it will touch something behind the bumper or not?
If you're based in Qld, Australia send us an email to brisbane@exclusivewraps.com.au for pricing and install costs. If you're not, check out www.flowdesignsaustralia.com for products and shipping.
Unfortunately no kits for the Jetta at the moment, shoot Flow Designs a message/email and if enough people do perhaps they'll put together a kit for it too!
@@ExclusiveWraps hi question with that, how did you remove the red stripes from the grill if you did, im struggling haha. awesome video also had no problem following this to install my kit. Thanks!
Tricky one, as long as the wheel base is the same i can't see why not, i assume the front and rear bumpers are the same, if they are then it should be fine. Best to check with Flow Designs on that to confirm
You can buy the kits directly through Flow for DIY install here: flowdesignsaustralia.com/collections/mk6-golf-gti Or you can purchase through us as we are a Dealer and we can arrange supply and install at a discounted a rate for you.
Hi, how much do you charge for this full kit and for installation?? Also is this Kit suitable for golf 6 tdi gt model ?? Thanks. Any link for your shop??
Hey mate, unfortunately the kit isn't suitable for thw tdi model. You can follow our other socials for heaps more on what we do here: IG @exclusivewrapsaus FB @exclusivewrapsaustralia
Is there an option without the logo on the side of the winglets? I’d rather just tell people what brand than have the logo plastered all over the parts for a cleaner look.
There isn't an option without the logo i'm afraid, perhaps shoot the guys at Flow designs a message, the more people that express interest the more likely they will create the products people are asking for.
Why do ppl insist on saying M K 6, instead of mark 6? Which is what mk is short for. (collins dictionary) "Mk Mk is a written abbreviation for mark. Mk is used to refer to a particular model or design of a car or machine." It's a Written abbreviation, meaning you don't Say it. Just as you don't say Good Morning M R Jones Sorry to be pedantic but if it's not corrected, no one will know. BTW the car looks awesome 👌
Don't forget to follow our Instagram @exclusivewrapsaus for more Exclusive content!
Dude, dont quit making videos you'll have a huge channel someday!
We haven't quit, heaps of new video content dropping weekly!
Totally agree with him, ciaoo
That GTI looks pretty clean! (The curb rash on the left rear, ouch!)
I remember getting my MK 6 GTI 10 years ago and wanting to a bunch of performance and cosmetic mods but I ended up trading in for a MK7.5 R.
Nice vid, brought back memories!
Haha yes, new rims are also one the way for this car!
We also have kits for the 7.5R if you're interested :)
I dont know how this hasn't blown up its mental your channel was amazing
Your channel is underrated
Haha thank you, hopefully we can get noticed oneday!
Finally SOMEONE got something from flow
Hi where are u based - great vid
Hi We're in Archerfield QLD
Who sells the yellow strip to replace red?
Great demonstrations 👍🏼
Thank you!
Thank you! Very good video with good tips and showing!
this kit looks so good
For a small channel your quality is amazing very easy to follow. Could you tell me the name of the lift you are using please?
Thanks man! really appreciate it :). The lift are a EAE vehicle lift.
@@ExclusiveWraps no problem thank you very much :)
This has helped me with mine so much thankyou
Glad to hear it!
Will the front splitter fit my golf mk6 GTD? thanks
Really helpful video. Quick question about the side splitters, what length self tapping screws did you use for the front two holes to replace the nut inserts?
Subscribed
Thank you!
Where did you get the headlights ?
Где брали задний спойлер на 5ую дверь?
I like your hair.. Same like me.. From Malaysia 🇲🇾..
カッコいい！
Great quality Channel! keep the good work :) what brand are your headlights? Thank you kindly
تعويض. ممتع. جدآ. شعور اخر
hello bro thanks for this video , have mk6 here ,. where i can buy that one
You get them from www.flowdesignsaustralia.com
how much are? did you change the suspension parts (body position sensor) as required for xenon?
Please tell me, what kind of suspension are installed?
Stock suspension on this one
Do I need that small lip there also
Hey guys I ordered & installed the full kit plus accessories on my Vw GTI Mk6 - of which I am beyond pleased with but I wanted to point out that I noticed the demonstration in the video when attaching the side extensions is not coherent with the written instructions.
Specifically the arrangement in the (A) Fitting kit. The gentlemen in the video states the arrangement should be bolt, metal washer, star-lock washer, and then rubber washer. In the instructional fitting diagram it specifically instructs bolt, star-lock washer, rubber washer, and then metal washer last.
The ONLY reason I’m pointing this out is because some people could get confused and assemble the extensions wrong. I hope in some way this has helped.
In conclusion I’d like to point out that Flow Designs is an ABCD type of business… they go above and beyond the call of duty, in every aspect. The superior quality product they provide is 1 in none & for anyone to be dissatisfied would be baffling. Flow Designs truly, genuinely separates themselves from the mass majority of other products alike. I fully recommend Flow Designs 💯 You can’t go wrong. Check em out. Thanks again guys, I’m stoked on the fit & look. You can expect I’ll be back. Until then… ✌️
Thanks for the feedback, and glad your install has gone well!
How did you get that yellow strip above the front grille??
Vinyl wrap :)
Where you got Front grill with orange lines please?
the kit is sick bro. Where did you get those headlights?
Supernovalighting.com.au is where they came from.
@@ExclusiveWraps thank you!
@@dynamiteSANTA No problem
Out of stock for mk 6 ...
is there any danger that, when breaking through the rear bumper with the electric screwdriver for the diffuser, it will touch something behind the bumper or not?
I seen vid and pic of this kit only on 4 doors gti does it fit on the 2 doors?
Does anybody know what year that gti is
It's a 2011 model
Hi, where can the mk6 rear lights be purchased from?
I've just purchased a 2019 gti . What would this kit cost canadian?
Hey there, you're best off checking in with the guys at Flow Designs themselves as they can ship internationally.
How much doe this cost
If you're based in Qld, Australia send us an email to brisbane@exclusivewraps.com.au
for pricing and install costs.
If you're not, check out www.flowdesignsaustralia.com for products and shipping.
Is there no way to possibly have the Kit as well as the mud flaps on?
Is this available for the 2017 Volkswagen Jetta MK6.5
Unfortunately no kits for the Jetta at the moment, shoot Flow Designs a message/email and if enough people do perhaps they'll put together a kit for it too!
Does this fit a golf mk6 gt tdi 09 plate
Is the Golf GTI MK6 allowed on Red P Plates in QLD?
Apparently so!?
how much for the whole kit??
what is the gti front grille you guys have installed on the car? i was looking for an oem plus gti grille that isnt the stock bright red.
Hi there, it's a stock grille, just the red stripe has been wrapped gloss black
@@ExclusiveWraps hi question with that, how did you remove the red stripes from the grill if you did, im struggling haha. awesome video also had no problem following this to install my kit. Thanks!
@@Quarkeyy They weren't removed, just wrapped in place.
Completely blacked out parts, installed on a blacked out car. Great for television. Totally able to see the installed parts.
Great job twinks.
a professional garage who removes the screws under phone light.
What headlights are those.?
Supernovalighting.com.au is where they came from.
Hey bro! Did you put your mudflaps back or no?
Hi Kyle,
No mud flaps unfortunately. They need to stay off for the install.
Time Stamps have now been added to the video to help you guys find what your looking for easier :D
hello i want to ask where i can order the same because i have golf 6 GTI…??
Hi Viktor,
Where are you based?
@@ExclusiveWraps Amsterdam ..
Where can I get the headlights from?
Supernovalighting.com.au is where they came from.
The flow design front splitter for the mk7/7.5R with the mounts is a headache of a job 🤯
They can definitely be a little challenging, a hoist Nd second set of hands makes it a lot more user friendly
I could be wrong but looked like you fitted the nutserts upside down in the side skirt. This could just fall off. Great vid tho 👌
where can I get all the parts ? ♥️ great video buddy
check out flowdesignsaustralia.com
Is there A kit for non Gti? :D i got A Style version, but it ain’t that special on its own
Unfortuntely not at this time, check out the flow website www.flowdesignsaustralia.com
Tail light link?
The tail lights are from these guys,
supernovalighting.com.au/collections/vw-golf-mk6
@@ExclusiveWraps thank you!
@@allypandullo8263 You're welcome
Great vid and setup! I want know, where to get those upgraded headlights for mk6 gti?
Supernovalighting.com.au is where they came from.
@@ExclusiveWraps You da bomb thanks!
Hello how can I see how much the kit cost
Check out flowdesignsaustralia.com
Would this fit on the 2 door ?
Tricky one, as long as the wheel base is the same i can't see why not, i assume the front and rear bumpers are the same, if they are then it should be fine. Best to check with Flow Designs on that to confirm
headlight assembly Brand please!!!!
Lol 3rd or 4th person to ask this.
Supernovalighting.com.au is where they came from.
Will this fit on a mk5 gti?
Is the kit approved to be installed in Europe, more specific in Spain?
Hi Daniel, I'm not sure on that one, you'll need to check with your local transport/government department on that one.
link for buy tis kit plase :)
You can buy the kits directly through Flow for DIY install here:
flowdesignsaustralia.com/collections/mk6-golf-gti
Or you can purchase through us as we are a Dealer and we can arrange supply and install at a discounted a rate for you.
@@ExclusiveWraps thank you
hi guys! i have mk6 but my knowledge is low so someone tell name wheels pls thx
Hi, those are the stock golf 6 GTI wheels
So good!! but too expensive...
Thank you, don't forget, good quality kits aren't cheap and cheap kits aren't good quality.
only thing missing is the eyelids
maybe in the future
How functional is this kit? Any effect on traction, mpg, etc.?
To be quite honest I'm going to say it's form over function ;)
GOTTA HAVE ME MY BOLTS AND HOLES😆 🛥️
Hi, how much do you charge for this full kit and for installation?? Also is this Kit suitable for golf 6 tdi gt model ?? Thanks.
Any link for your shop??
Hey mate, unfortunately the kit isn't suitable for thw tdi model.
You can follow our other socials for heaps more on what we do here:
IG @exclusivewrapsaus
FB @exclusivewrapsaustralia
paint the calipers yellow 😍😍
It was discussed haha
Does it fit the base Model golf?
Is there an option without the logo on the side of the winglets? I’d rather just tell people what brand than have the logo plastered all over the parts for a cleaner look.
There isn't an option without the logo i'm afraid, perhaps shoot the guys at Flow designs a message, the more people that express interest the more likely they will create the products people are asking for.
How can I contact you?
You can contact us via email or message us on any of our social media pages :)
N E E D
Do it!
Hey man are you guys located in Florida? If so give me the address plz
We are located in Queensland, Australia
Haben die Sachen Deutschen TÜV ??
Why do ppl insist on saying M K 6, instead of mark 6? Which is what mk is short for.
(collins dictionary)
"Mk
Mk is a written abbreviation for mark. Mk is used to refer to a particular model or design of a car or machine."
It's a Written abbreviation, meaning you don't Say it.
Just as you don't say
Good Morning M R Jones
Sorry to be pedantic but if it's not corrected, no one will know.
BTW the car looks awesome 👌
Un pelín de pintura negra a esos tornillos no le irían mal. 🙄🙄
Bro help me do this 😍
Bring the kit in and we can give you a quote to get it sorted!
It’s not MKay6 😂 it’s Mark 6…..MmmmKay?
Em Kay 6 😂 mark6 is how you say it. 👍🏽
To bad it's not a bolt up I hate drilling into cars
Yeah unfortunately any lip kit is going to require drilling, but it can be done very neatly as you see here.
German TÜV says....NOOO! saad
Too much kit sticking out not for me
Look
Man....... mudguard on a vw gti......lol
Yeah man for all the off road rally driving he does lol.
Silver SCREWS - SHIT
That rear thing is butt ugly and as said on MCM should go “in the bin”
Buena manera de arruinar un golf gti
What a waste of time..
Thanks for watching it at least 😁