22. Essential Marking Gauges
HTML-код
- Опубликовано: 28 дек 2022
- Here's the episode that will show you how to mark your workpieces exactly no matter how small, complicated, or large.
Visit www.blackburnbooks.com for books and to sign up for lessons in Woodstock NY.
Hello, Mr. Blackburn;
About the difference in the folding rules you mentioned.
I'm not sure, but I think it is 'handedness', as in left-handed or right-handed.
Not long ago I found out that the ubiquitous measuring tape also comes in handed versions.
Although the two versions are not equally available we can buy left-handed or right-handed tape measures.
The difference is which hand holds the tape & which side of the tape the user reads from.
If you get my meaning.
Pull the tape w/ the left hand, read from right to left.
Pull the tape w/ the right hand, read from left to right.
I hope that is clearly understood.
Thank you, sir, for all you do.
Have a GREAT day, Neighbor!
this is also true....sometimes.
Wow very interesting and informative. Thank you for sharing your knowledge.
My pleasure!
Thank You Graham... 8 days ago, wow, I do not know how I missed this one...I still have my Grandfathers marking gauge from the 20/30's. Very well used. As a very small boy I remember hearing him criticize the construction walking through a new (1962?) home. .... TM
Mmm, some things have got a little better...
Thank You Sir. Educative to the great extent. 🎉
My pleasure
Thank you, sir! Excellent knowledge.
Glad it was helpful!
Very timely. Just finished restoring my grandmother's marking gauge and am now restoring a metal folding ruler made in Birmingham, England. Thanks Graham!
You're very welcome!
Nice collection, may I add that the long one is also called Panel Gauge:).
Of course!
Nice share, thank you.
Thanks for visiting
And now I want to make a few more marking gauges.
Go for it!
You are a wealth of knowledge. I learned a lot! Thank you!!
My pleasure!
Always spot on with variety of examples
Glad you like them!
Very interesting learning all the "new" marking gauges. I didn't know half of them even existed! Thank you and Happy New Year.
Thanks, you too!
Great showing!
Thanks!
Thank you Mr. Blackburn. Very informative and clear. We enjoy your helpful video's. I m lucky to have a beautiful MARPLES which incorporates several of the functions you mentioned all in one tool and (no) surprise, it's made in England! Also happy to have collected some of your wonderful books over the years, which have helped us learn many basic and advanced woodworking techniques. Keep up the good work and Happy New Year.
You are very welcome
I hope you had merry Christmas and happy new year to you and your family and thank you for teaching me woodwork.
Same to you!
I thought I knew all I needed to know about marking gauges...until I watched this. Thank you
Me too, constantly learning!
Well explained sir! thanks for that.
You're welcome!
Thank you
You're welcome
thanks for the info
No problem!
Great video, thank you so much Graham!
I prefer the disc cutter marking gauge.
Yep, I use those, too, but I was just trying to stick to the trafitional ones.
I like to set my mortise gauge to the width of my mortise chisel. Tools that match are amazing.
Way to go!
Interesting 🤔 , thanks.
Thanks for watching!
Informative video Graham. I never knew the variety of different marking gauges before. I would have said 4 or 5 but I'd have been way off, even not including the oriental ones.
Always something new, for me too.
Very interesting. It leads me to rethink about thé way i use marking gages.
Glad to help.
Thanks, Graham! 😊
I tried to make one once, but it didn't work well... (Long story...) But I'm definitely going to try again!
Stay safe there with your family! 🖖😊
And happy new year!
Thanks, same to you!
Never seen one like that!
There's always something new to discover!
Folding rule made in USA were made by us left handed people, the only ones in our right mind, LOL.
I see me making a new marking guage for curvey work. Thank you for sharing.
Something for everyone!
Knew about a third of those. 🙄 Always learning. Thanks.
You're welcome!
As far as the left or right handedness of the folding rules;
There is mention in the old Audels books about British and American carpenters layng out measurements in different ways. I think the british hold the zero to the edge of the material and mark to the number on the rule or tape. Americans hold the number on the edge and mark to the zero, or end, of the rule.
Not sure if this is correct or not.
Thank you for all your videos.
Once upon a time this was sometimes true...
Very interesting. I have a couple or 3 marking gauges including a tenon gauge. I will be on the look out now.
Btw you inspired me to buy some wooden planes. I already have the Stanley metal versions 4, 4.5 and a 5 .
The Longest wood one I bought is 20 inch and sharp. I presume this would be a pointing plane?
I think you mean a 'jointer', yes.
It seems intuitive to me: If you are right handed you hold the folding rule with the left hand and you mark the measurement with your right hand. With a folding rule numbered from left to right you have to hold the rule with your right hand (to read the rule in the correct orientation) and mark the measurement with your left hand. Not good if you are right handed. PS: Thanks for sharing Mr. Blackburn.
True, but you could always stand on the other side of the bench!
I’ve got a folding 2 foot rule that features little sun ☀️ marks on it as well as decimal inches. Do you have any context on that?
Never seen a sun. Interesting!
i want to order marking gauge for woodworking
Sorry, not selling tools at the moment. Try ebay or just googling .
Hey! Us Yanks drive on the Right side of the road. LOL 😜
You know you have Napoleon to thank for that - makes sword use harder!
Thanks for the video. Do you have any plans to actually make something in one of these videos? I certainly would be interested in seeing a traditional piece of furniture be built using traditional handtools and methods. You can't really find such videos. You either find machinists building traditional furniture or hand tool woodworkers building nontraditional furniture.
Coming soon, I hope, with plans to match. Stay tuned.
"Very interesting" just like the old Laugh-in. LOLAL.
Thanks!