WOW girl that stuffs amazing I want some love it the possibilities are endless for you with this I'm so pleased for you I love your enthusiasm it's so infectious xxx
These turned out so nicely, They have that subtle granite appearance. Have you ever tried spraying isopropyl alcohol after 30 mins or so or the first hour to cut down on bubbles? Also the gentle sparkle they have would be lovely in the tray, for canapés & martinis in the sun Thanks for sharing Claire,
Heyyy Paul ... I haven't tried alcohol with this no ... x The AC100 is more noticeable with bubbles than this one... so I think the granite effect hides imperfections 😍😍😍
Claire, I have been watching your channel only, since December 2022. I haven't seen any other videos on this product. YET. Since it's Spring, would you be open to doing another video on this? This is April 2023.
Heyyy Anna .. you could absolutely yes make tiles for sure ! AC100 would be great for work surfaces ... only problem is ... at this stage Jesmonite HQ have not tested it for food safety xxx
Wow! Just Wow! Oooh your gonna have fun at Halloween with that stuff, head stones and coffins lol. Are there even more kinds of Jesmonite out there still to try Claire? I'm intrigued lol 😍🥰
Thank you so much... yes there are others available 😍😍 Oooooo Head Stones ? Ohhhh my goodness now you have my mind excited for Halloween too ! Just need a giant headstone mould 😱😱😍😍😍
Thank you so much for your videos! I ordered Jesmonite 100 for now and if I like working with it, I’ll definitely try this one too! I want to create soap holders and as far as I can tell from your videos, this one would be waterproof enough for bathroom use! Thank you for your videos!
You said moulds linked below? Am new to this. On another video you said a video was linked explaining what jesmonite is etc but I can't find that either 🙈
Heyyyy lovely, I just looked up the colours, they come in Brick Red, Old Terracotta, Cotswold Honey, Charcoal Black, Marigold, White Marble, Bath Stone and Yellow Sandstone and a couple more 😱😱😱 I have not seen the results of most of these .. BeadleHouse on Insta has used the Black and Marble ... ... but I dont think they will all have the black specs. In ..
Hi Your channel is awesome...I orderd jesmonite ac730 and recieved it yesterday but after all the research I am now nervous to try😅😊 (typical me) but can you tell me; after demoulding some say you need it to harden for 24 hours before doing the "vinegar bath"...and some say you can do it directly after demolding? Your advice? Thank you rgds Bianca
Heyyy lovely .. I know they have a few other colours and effects .. I am not sure if they have the smooth option. You could do a top rub in resin as it was suggested to me also ... x
Heyyy Carol thanks so much ... ahhh are you in the USA ? sadly Jesmonite is not available there :( something I never knew when I started x but I love both resin and this now .. and I have not yet mastered resin lol
@@ClairesCraftyCorner , yes I’m in the USA 😩. I hear there are possibly comparable products here, but I’m still trying to master the resin right now anyway! Lol❤️❤️
Hi Claire they look amazing 😍 have you thought of using a sonic scrubber it looks like an electric toothbrush but for cleaning around the house etc. Just an idea
Hi Claire 👋 just found your channel and I’m hooked already lol. I’m a fluid artist and love playing with alcohol inks. Do you think once this is sealed I could make designs with alcohol ink on it? Wondering how porous it is after the sealant is put on 🤔 Please keep sharing your vids….so good to see something new 👍
Heyyyyy Wendy thank you so much ! I would love to be good at fluid art ... I am not ! haaaa I did buy the stuff for Alcohol Ink art I just haven't tried it yet ! lol it is possible ... someone else asked me so I am going to try but again, I am not an alcohol ink artist. So glad you enjoyed xxx
Heyyyy lovely ... I truly wish you could too ! xx there is a stockist in Canada ... I am not sure how much shipping would be to the USA but might be worth checking x
I love your videos and the end results of all your makes. I have just bought my first batch of jesmonite and got the ac730, but I didn’t realise that I’d got the old terracotta colour. I haven’t used it yet but was wondering if it would colour with pigments x
Heyyyy Michelle..... Thanks so much ! ohhhhh Teracotta is Saturday's video ! I made two pots using it ... I love it !! absolutely gorgeous stuff !! xxxx The Terracotta is already very very pigmented so I am not sure you could definitely darken it with Black or maybe the Red Oxide x
Hiya Claire, have you tried isopropyl alcohol for surface bubbles on AC100/AC730? I've seen so many comments from people on getting bubbles put of Jesmonite in comparison to Resin. I cant see why it wouldn't work but im not experienced enough to know. I'd really like to hear your thoughts? Or have you tried this before? X
Heyyyyy Lovely.. I haven't tried it .. but mainly because I have already been told it doesn't work x I think it works well with Resin because of the chemical reaction with the alcohol .. but with Jesmonite being a super fast setting powder base it doesn't have the same effect x Having said this .... I will give it a go 🤣😍
I’m in the US and we don’t have any suppliers for AC730 ☹️. I found suppliers in other countries but the shipping costs out weigh the purchase. I really, really, really want to try it tho. Just trying to convince myself to order it. 🤦🏽♀️
heyyyy S .... no sadly it is not available in the USA at all ... people get it through ETSY stores but it is ££££££ There is a stockist in British Columbia Canada who ship to the USA but again ... the shipping is probably the same amount as the product x
I’m wondering about the strength of the tray Vs the same tray with epoxy? I would hate to be carrying a hot pot of coffee when the tray collapsed in the middle.
I love this . I bought the AC730 in Portman stone just waiting for this mould . Can you mix the mixture with the jesmonite mixing blade or do you just stir
Hi Maria, you can mix it by stirring, but the mixing blade is much more thorough, so you won't get patches of powder. AC730 is much thicker to, so it takes a bit more elbow grease!×
Heyyyyy lovely ... I actually do not have a formula for it ... but .... 😍😍😍 there is an online calculator for it. If you Google 'Jesmonite Calculator ' you will see it pop up xx enter your water amount and it will tell you xxx
Hi think ive watched every vid!!!!....just made my first pot using natural base....do i need to etch it or put in vinegar to see a different texture....thanks cometly novice!!
heyyyy lovely sorry for the delay in responding xx if it is AC730 yes it needs etching x but you have probably done this now because I have replied so late x
Your work is fantastic and really appreciated for all of us, newbies 😅 I just have a question, maybe you’ll have the answer. My AC730 hardens super fast, like from the mixing stage. It never becomes fluid enough to be able to pour it into the mould. I have to push it down with my hands and in 2 minutes it’s already hard. I follow the exact 5:1 ratio on a digital scale, but doesn’t seem to work. With AC100 I always get it right. With AC730 never! It’s frustrating 😭
Heyyyyy lovely, thank you so much ! I have absolutely no idea why that is happening I am so sorry ... I usually mix and pour within 5 mins still with the AC730 ... it has never gone hard like that for me .. it is possible you have a dodgy batch or one part is out of date ? I would definitely ask your supplier xx
@@scripcariuana Hi, I have similar experience. I usualy have quite good consistency after a few seconds of mixing but before I can pour everything it into the mold, it’s hard. And as you said I also have to use my hands to push it down. Demoulded after ten minutes and its all set. Do you have any answer from Jesmonite factory?
Hey Claire!! Just came across your channel and I m hooked. Throughly enjoying the detailed videos you share while keeping it fun. My question is, since its got a rough surface, can epoxy be poured over it to make it smoother?
heyyyyy lovely ... thank you so much x that really means a lot ! xx and yes Epoxy can be poured over the top ... Epoxy Sticks to Jesmonite but Jesmonite does not stick to Epoxy x
@@ClairesCraftyCorner ooo I’ve just done epoxy and let it set, and then layered jesmonite on it and they have bonded. Maybe I should give one of them a bang to see if it falls off. X I’ll let you know
@@theseaglasscompany ohhhh yeh they definitely do set .... depending on what you have made .. if the surface area is large it will be fine but they will pop apart eventually 😢😢❤❤ if its a layeredpot for example xxx
@@ClairesCraftyCorner I wish I could show you a picture on here. It’s been 24 hours and I’ve just give it a good old bang and ok. I wonder if I should sand it to the seam and brush some epoxy glue around it? What do you think?
@@theseaglasscompany ohhhh can you send it to me in Instagram? My first pot broke after one month... the second pot broke apart after 2 months... so its not instant. Xx definitely send me a picture on Instagram I would live to see it anyway 😍😍😍
@@marydavis4533 Oh I knew I'd have to set it a certain way in a certain position. But I didn't know about reading it like a clock! I think it's a very interesting idea you had, tho!!
heyyyy Pedro .. you do not need it for AC100as it is not textured at all .. but I have not tried it for the likes of terrazzo :) x I could give it a go
Hi sorry .. I just had to watch the video again .. Looks like I didnt even talk about it I believe it ended up being 250g Liquid and 1,250g powder for this pot.
@@ClairesCraftyCorner thank you so much. I appreciate you looking back at your video again. Hopefully my attempt will yield the same results as yours 🙏
you're absolutely right .. I missed that off .. because I never quite worked it out :) I think the final measure was around 1,400g total ... so divide that by 6 to get one part xx
![Yeat & Summrs - GO2WORK [Official Music Video]](http://i.ytimg.com/vi/NEFEwfPcXRA/mqdefault.jpg)
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
This is fantastic Claire, and some brilliant tips! We have so much for you to try and cant wait to see what you can do with it! ❤
Thank you so much ❤ I am mega excited and grateful xxx
Is there any difference between the hardness/solidity of the Jesmonites, please?
@@ClairesCraftyCorner
Bloomin woman, I've just bought some more AC 100!!
YOU really are MY bad influence!!! xx
@@amethyst1826 I think AC730 is more robust as it is designed for outside x
@@amethyst1826 🤣🤣🤣🤣 sorry
They turned out amazing. I have to say your excitement is infectious. Love your channel so much.
Heyyyyy Christina thankyou so much ❤❤ that means so much I am so happy you do .. these were exciting to create xxx ❤️ 💖
WOW girl that stuffs amazing I want some love it the possibilities are endless for you with this I'm so pleased for you I love your enthusiasm it's so infectious xxx
Thanks so much lovely xxx I am excited xx
So so beautiful!!!!!!! Absolutely love the text comments “it was not enough” etc. gives me a good giggle every time ♥️
Thanks so much Kristy.... it's NEVER enough haaaa 🤣🤣🤣🤣 one day !
Fab video. They look so smart. Love your little notes to yourself. You're so funny x
Thanks so much! 😊 xxx
Wow Claire these are gorgeous! I love the color of the pot and tray. Well done again🖤🤍
Thanks so much Johnnie ❤
Great result Claire. I'm looking forward to seeing what you're planning next with this polysil.
Thank you so much lovely ! 😊
ANOTHET project to try !! Love these ❤❤❤
These turned out so nicely, They have that subtle granite appearance. Have you ever tried spraying isopropyl alcohol after 30 mins or so or the first hour to cut down on bubbles? Also the gentle sparkle they have would be lovely in the tray, for canapés & martinis in the sun Thanks for sharing Claire,
Heyyy Paul ... I haven't tried alcohol with this no ... x The AC100 is more noticeable with bubbles than this one... so I think the granite effect hides imperfections 😍😍😍
@@ClairesCraftyCorner It definitely isn't as noticeable. I love these alot ❤
Hi Claire,great job,love the finish. They look special. 😊👏👍💙
Thanks so much Dad xx
Oh I love them both! Absolutely gorgeous! Well done.
Thankyooooo sis x ❤❤
Love love love! I’m a fan of that texture too, soo beautiful 🤩
I tagged you on fb on something I made, wanted you to see it xx
oooo Shaz thanks so much .. I will head over there and check it out x I rarely go on there ... I must sort that out x
Wow looks stunning xx
Thank you so much xx ❤❤❤
Turned out lovely 👍😘
Thank you so much Nina x ❤❤❤
Claire, I have been watching your channel only, since December 2022. I haven't seen any other videos on this product. YET. Since it's Spring, would you be open to doing another video on this? This is April 2023.
Thank you so much enjoyed the video the products are beautiful do you think you would be able to make work surfaces with this even tiles love it !!!
Heyyy Anna .. you could absolutely yes make tiles for sure ! AC100 would be great for work surfaces ... only problem is ... at this stage Jesmonite HQ have not tested it for food safety xxx
Great Job Claire...
Thank you so much Sheryl ❤❤❤ Epoxy will be next .. trying to alternate 🤣❤❤
Thank you for this video 😍
Thank you so much Lovely xxx so sorry for the delay I am sooo behind on replying to comments I really appreciate it xxx
I know I've already commented but I really do love these!!!! I think the yay be my favourite thing you e made!!
Heyyyy sis yayyy thanks so much xx I guess I know what to give you for a belated birthday and early Christmas x haaaaa
Wow! Just Wow! Oooh your gonna have fun at Halloween with that stuff, head stones and coffins lol. Are there even more kinds of Jesmonite out there still to try Claire? I'm intrigued lol 😍🥰
Thank you so much... yes there are others available 😍😍 Oooooo Head Stones ? Ohhhh my goodness now you have my mind excited for Halloween too ! Just need a giant headstone mould 😱😱😍😍😍
Omg yeees!!
Tombstone moulds Claire lol www.amazon.co.uk/BESTOYARD-Silicone-Halloween-Gravestone-Decoration/dp/B07F8Q34GY/ref=asc_df_B07F8Q34GY/?tag=googshopuk-21&linkCode=df0&hvadid=309034580856&hvpos=&hvnetw=g&hvrand=2912173748632133179&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=20342&hvtargid=pla-713014495098&psc=1
@@morticia1964
Oooooh now you've started things!! Lol
These are beautiful
Thank you so much Sarh xxx
Oh these are beautiful!! Love the texture ❤️
Thanks so much 😊 xx I love the texture too x
Thank you so much for your videos! I ordered Jesmonite 100 for now and if I like working with it, I’ll definitely try this one too! I want to create soap holders and as far as I can tell from your videos, this one would be waterproof enough for bathroom use! Thank you for your videos!
heyyy lovely, thaks so much x yes you are right AC730 would be best for it x
Oh.my.God! I'm in love!❤❤ I have a feeling the purse is gonna take a hit again... 🤣🤣 Well done, Claire!
ha ha Laura thanks so much x so sorry for the purse ! haaa
You said moulds linked below? Am new to this. On another video you said a video was linked explaining what jesmonite is etc but I can't find that either 🙈
Love, love, love it Claire. You mentioned that this comes in different colours - do the coloured ones have the black flecks in them?
Heyyyy lovely, I just looked up the colours, they come in Brick Red, Old Terracotta, Cotswold Honey, Charcoal Black, Marigold, White Marble, Bath Stone and Yellow Sandstone and a couple more 😱😱😱 I have not seen the results of most of these .. BeadleHouse on Insta has used the Black and Marble ... ... but I dont think they will all have the black specs. In ..
@@ClairesCraftyCorner Thanks Claire, can't wait to see more of these!
Those look amazing Claire, but then I would expect no less from you 🤗
Thankyou so much Dutch ❤❤🥰🥰
Love the finished product!! Beautiful ❤️❤️❤️💕
Thanks so much Lisa .. I love the stuff x
Hi
Your channel is awesome...I orderd jesmonite ac730 and recieved it yesterday but after all the research I am now nervous to try😅😊 (typical me) but can you tell me; after demoulding some say you need it to harden for 24 hours before doing the "vinegar bath"...and some say you can do it directly after demolding? Your advice? Thank you rgds Bianca
That Jesmonite looks so good! Also, as you was scrubbing the tray my neighbours ducks started whacking in time with you 😂
🤣🤣🤣 omg that is brilliant ... I want ducks how cool that would be
@@ClairesCraftyCorner
Go to Stowmarket. They wander around the town willy-nilly, especially near Asda. Lol
They're so cute! xx
Really nice pieces.
Thanks so much Mary x
Just a question. How would you get this effect but smooth instead of rough feel? Another awesome video. You are definately the Jesmonite queen 😉♥
Heyyy lovely .. I know they have a few other colours and effects .. I am not sure if they have the smooth option. You could do a top rub in resin as it was suggested to me also ... x
@@ClairesCraftyCorner i did think that , adding resin so will give it a try. Thanks heaps ♥
Wow! Very nice! Haven’t attempted jesmonite as yet! Still working on getting resin right! Lol! ❤️❤️
Heyyy Carol thanks so much ... ahhh are you in the USA ? sadly Jesmonite is not available there :( something I never knew when I started x but I love both resin and this now .. and I have not yet mastered resin lol
@@ClairesCraftyCorner , yes I’m in the USA 😩. I hear there are possibly comparable products here, but I’m still trying to master the resin right now anyway! Lol❤️❤️
@@cosmiccarolcreations ahhhh yes there are xx ❤❤❤
Absolutely love it. Which colour is this?
It's the Silver Grey Granite ... I did mention this in the video 😁🙌🙌🙌
@@ClairesCraftyCorner thank you so much for your quick reply. I listen few times , but I’ve missed it. I can’t find this colour on polysil website 🥺
They are beautiful, think I want to try it. 😂😂
Heyyy Pamela so glad you liked it x it is such fun to work with x
Hi Claire they look amazing 😍 have you thought of using a sonic scrubber it looks like an electric toothbrush but for cleaning around the house etc. Just an idea
Heyyyy Rema ... thanks so much x I have not thought about but ... anything to make things easier I am all over it !
Hi Claire 👋 just found your channel and I’m hooked already lol. I’m a fluid artist and love playing with alcohol inks. Do you think once this is sealed I could make designs with alcohol ink on it? Wondering how porous it is after the sealant is put on 🤔 Please keep sharing your vids….so good to see something new 👍
Heyyyyy Wendy thank you so much ! I would love to be good at fluid art ... I am not ! haaaa I did buy the stuff for Alcohol Ink art I just haven't tried it yet ! lol it is possible ... someone else asked me so I am going to try but again, I am not an alcohol ink artist. So glad you enjoyed xxx
Hi there! What do u do with the vinegar once used? Pour it back into the bottle ? Otherwise we r waisting so much for it each time right? Thanks ❤
Love these, wish we could get it in the US!
Heyyyy lovely ... I truly wish you could too ! xx there is a stockist in Canada ... I am not sure how much shipping would be to the USA but might be worth checking x
I love your videos and the end results of all your makes. I have just bought my first batch of jesmonite and got the ac730, but I didn’t realise that I’d got the old terracotta colour. I haven’t used it yet but was wondering if it would colour with pigments x
Heyyyy Michelle..... Thanks so much ! ohhhhh Teracotta is Saturday's video ! I made two pots using it ... I love it !! absolutely gorgeous stuff !! xxxx The Terracotta is already very very pigmented so I am not sure you could definitely darken it with Black or maybe the Red Oxide x
Hi Claire, that’s great I can’t wait for that one. I was thinking the same about black or red 🤞. I’ll let you know how it turns out x
I missed it!!! Watching replay dang it!!!
Heyyyy sweets lol I hope you loved it x
Great video, can I just use the vinegar or does it have to be acid etching? Thanks
Heyyyy Van .. I only use Vinegar x
Hiya Claire, have you tried isopropyl alcohol for surface bubbles on AC100/AC730? I've seen so many comments from people on getting bubbles put of Jesmonite in comparison to Resin. I cant see why it wouldn't work but im not experienced enough to know. I'd really like to hear your thoughts? Or have you tried this before? X
Heyyyyy Lovely.. I haven't tried it .. but mainly because I have already been told it doesn't work x I think it works well with Resin because of the chemical reaction with the alcohol .. but with Jesmonite being a super fast setting powder base it doesn't have the same effect x Having said this .... I will give it a go 🤣😍
I’m in the US and we don’t have any suppliers for AC730 ☹️. I found suppliers in other countries but the shipping costs out weigh the purchase. I really, really, really want to try it tho. Just trying to convince myself to order it. 🤦🏽♀️
heyyyy S .... no sadly it is not available in the USA at all ... people get it through ETSY stores but it is ££££££ There is a stockist in British Columbia Canada who ship to the USA but again ... the shipping is probably the same amount as the product x
Bravo,.amazing. Do you think the tray can be made using cement instead of Jesmonite? I can't find Jesmonite and it's quite expensive.
heyyyy AA yes Cement would work x
I’m wondering about the strength of the tray Vs the same tray with epoxy? I would hate to be carrying a hot pot of coffee when the tray collapsed in the middle.
Gargoyles next?! 🤪🤪
I'd love my own property with gargoyles! Lol xx
ahhhh we have Gargoyles on our property haaaaa they are all over the place ! my Hubby loves Gargoyles lol
I love this . I bought the AC730 in Portman stone just waiting for this mould . Can you mix the mixture with the jesmonite mixing blade or do you just stir
Hi Maria, you can mix it by stirring, but the mixing blade is much more thorough, so you won't get patches of powder. AC730 is much thicker to, so it takes a bit more elbow grease!×
Thanks so much Maria glad you love them x That Portman stone sounds gorgeous !
Hi, do you have any idea how to accurately calculate the ac730 for moulds? Thanks 🙂
Heyyyyy lovely ... I actually do not have a formula for it ... but .... 😍😍😍 there is an online calculator for it. If you Google 'Jesmonite Calculator ' you will see it pop up xx enter your water amount and it will tell you xxx
@@ClairesCraftyCorner thank you! How did I not know about that 😂 you're the best ❤️
@@tinybat8974 ohhhh I didn't know for ages either lol its not the Official Jesmonite website ... but another place set it up x still does the job !
@@ClairesCraftyCorner I can't wait to receive my order now 😆
Hi think ive watched every vid!!!!....just made my first pot using natural base....do i need to etch it or put in vinegar to see a different texture....thanks cometly novice!!
heyyyy lovely sorry for the delay in responding xx if it is AC730 yes it needs etching x but you have probably done this now because I have replied so late x
@@ClairesCraftyCorner thanks soo soo much!! Xx
@@sarahmccoy7863 ❤❤
Hi clair , what was the liquid material that hou used with powder for preparing the jasmonite?
Hey Lilian .. that is the AC730 liquid ... its a 2 part .. A and B ... Powder and Liquid
Your work is fantastic and really appreciated for all of us, newbies 😅 I just have a question, maybe you’ll have the answer. My AC730 hardens super fast, like from the mixing stage. It never becomes fluid enough to be able to pour it into the mould. I have to push it down with my hands and in 2 minutes it’s already hard. I follow the exact 5:1 ratio on a digital scale, but doesn’t seem to work. With AC100 I always get it right. With AC730 never! It’s frustrating 😭
Heyyyyy lovely, thank you so much ! I have absolutely no idea why that is happening I am so sorry ... I usually mix and pour within 5 mins still with the AC730 ... it has never gone hard like that for me .. it is possible you have a dodgy batch or one part is out of date ? I would definitely ask your supplier xx
@@ClairesCraftyCorner Yep, I emailed Jesmonite factory in UK. Waiting for their reply 😅🙏🏼
@@scripcariuana Hi, I have similar experience. I usualy have quite good consistency after a few seconds of mixing but before I can pour everything it into the mold, it’s hard. And as you said I also have to use my hands to push it down. Demoulded after ten minutes and its all set. Do you have any answer from Jesmonite factory?
@@michaelaskryjova7084 I didn’t get an answer. I went back to AC100 :(
@@michaelaskryjova7084
Hi, I have the same problem. Have you found a solution in the meantime?
Bonjour Claire.
I"m New here and i'm lost with the ratio....what is the exact ratio please????...
Merci
Polysil have a data sheet on their website
Hi Claire, have you tried etching the ac100 with vinegar? just curious is works.
I haven't tried it sorry 😐 there's no reason to etch AC100
Hey Claire!! Just came across your channel and I m hooked. Throughly enjoying the detailed videos you share while keeping it fun. My question is, since its got a rough surface, can epoxy be poured over it to make it smoother?
heyyyyy lovely ... thank you so much x that really means a lot ! xx and yes Epoxy can be poured over the top ... Epoxy Sticks to Jesmonite but Jesmonite does not stick to Epoxy x
@@ClairesCraftyCorner ooo I’ve just done epoxy and let it set, and then layered jesmonite on it and they have bonded. Maybe I should give one of them a bang to see if it falls off. X I’ll let you know
@@theseaglasscompany ohhhh yeh they definitely do set .... depending on what you have made .. if the surface area is large it will be fine but they will pop apart eventually 😢😢❤❤ if its a layeredpot for example xxx
@@ClairesCraftyCorner I wish I could show you a picture on here. It’s been 24 hours and I’ve just give it a good old bang and ok. I wonder if I should sand it to the seam and brush some epoxy glue around it? What do you think?
@@theseaglasscompany ohhhh can you send it to me in Instagram? My first pot broke after one month... the second pot broke apart after 2 months... so its not instant. Xx definitely send me a picture on Instagram I would live to see it anyway 😍😍😍
This is great! Does anyone know if I’d be able to paint over it. I want crisp paint lines so I would prefer to paint rather than colour it
Heyyyy lovely ... thanks so much x yes you can paint over it ❤ acrylic or metallic paint works well x
Hi Claire, What sealer are you using? Thanks
Hey lovely ... I used the Flexiguard ❤❤
Ever think of making a sundial?
Ohhhhh Mary 😍😍 what a beautiful Idea 😍😍
Oooooh now THAT would be fantastic, Mary Davis!!!
Not that I can read one, or that it would even work in my back 'yard' but it's a fantastic idea!!!
@@amethyst1826 reading one is like reading a clock. But you need to look oneline and determine your longitude and make it for your area.
@@marydavis4533
Oh I knew I'd have to set it a certain way in a certain position.
But I didn't know about reading it like a clock!
I think it's a very interesting idea you had, tho!!
Hi ! What sealet would you recommend using now ? (the jesmonite sealer is no longer available, I can'y find it anywhere :( )
heyyyy Heather I am loving the new ones from Elichem x Also Resin 8 have a protect it sealer .. havent tried it yet but will be soon x
Hi Claire do you know if the vinegar technique works on AC100? also what type of vinegar do you use? Thanks
heyyyy Pedro .. you do not need it for AC100as it is not textured at all .. but I have not tried it for the likes of terrazzo :) x I could give it a go
Hi 👋 3:26 you poured 149 ounces of liquid and 5x that of powder into the mix. Correct? Thanks in advance
Hi sorry .. I just had to watch the video again .. Looks like I didnt even talk about it I believe it ended up being 250g Liquid and 1,250g powder for this pot.
@@ClairesCraftyCorner thank you so much. I appreciate you looking back at your video again. Hopefully my attempt will yield the same results as yours 🙏
Anybody else thinking 'Oliver Twist' &
"Please sir, may I have some more?" 😄😄
haaaaaaa I am pretty much Oliver ... on a daily ! with food ha ha
can you share the link for the sealer?
Heyyyyy lovely ... this is the sealer I used www.polysil.co.uk/product/jesmonite-flexiguard-sealer-ac730/
Could you use steel wool instead? I wonder if that would work without getting destroyed
heyyy Emma ... I am not sure actually never tried ... it might be a tad harsh ... although the rest has pretty much set by then x
How much AC730 did you end up using for this pot? You mentioned the AC100 quantities but not the AC730.
you're absolutely right .. I missed that off .. because I never quite worked it out :) I think the final measure was around 1,400g total ... so divide that by 6 to get one part xx
You could probably use a nail brush to scrub the jesmonite.
such a good idea ! that would cover a wider surface too x
Can you colour AC730 with the jesmonite pigments?
Yes you can 😍😍😍
Hi where can I purchase the large pot mould ?
It is from Amazon linked below xx
What is that liquid? And can't we use simple water to mix it?
heyyyyy lovely .. the liquid is Jesmonite Liquid ... you need the liquid and the powder x sadly water will not work x
A vegetable scrubber/brush would scrub a larger surface area than a toothbrush
That would be perfect thanks Chris xx
Is this vinegar method also working with jesmonite 100?
hey lovely, you do not need vinegar with AC100 x
How much time do you need to wait to take it out of the mould?
heyyyy lovely ... with AC730 it is 4 hours
@@ClairesCraftyCorner thank you 😉
Does anyone know if alcohol inks can be used with jesmonite ac100?
Heyyyy lovely ... not at this stage ... but next week I am doing a video on it and other things being added too x
@@ClairesCraftyCorner thanks Claire would love that. Will keep an eye out for the video
@@sangharyudayasurian4422 thanks lovely ... it will be out Wednesday xx
i wish it (and i) was hate prooh though 😆😆😆
heyyyy lovely .. AC730 is heat proof x