I enjoyed the hell out of this. (Just fell down a rabbit hole over here, no intention to use the product. But if I run into a friend attempting a chalk wall I feel confident to give some unsolicited advice.)
Thanks for the demo. This saves me a lot of trial and error. I'm just making a magnetic surface to display my wife's magnet collection so it should be perfect!
This was really helpful! I want to make a magnetic wall in my daughters playroom and make some wooden gears with magnets on the back, various other things for ger to play with. Im thinking for my application maybe sheet metal would be better.
For my purpose, I think this paint will work perfectly. I’m building a slot car track with some pretty big elevation changes. I’m going to use this paint to give me better downforce in some of the more intense curves. (One of which mimics Laguna Seca’s world famous Corkscrew.) As it is, the roughly 3/16” rails are the only source of magnatraction in those areas and you can lose control VERY easily. My plan is to paint a 1”strip just inside & outside of the rails of my slot car track. The second coat will be 3/4” and the third will be 1/2”. I’m hoping to give a smoother, more controllable drift in those particularly tricky areas of the track. This review was extremely helpful, THANKS!
I think you may have had better luck sealing/pre-priming the surface first to reduce the soak in. I'm actually surprised that it held at all with one thinish coat though, seems like decent stuff
Question. Could I use this magnetic paint then paint over it with chalkboard paint so I can use the same area for both magnetic and chalkboard???? I would assume instead of using latex paint I could use the chalkboard paint.
Nice video! I like the way you are to the point. I considered using this on my enclosed work trailer door. I figured I might be able to attach a neodymium shelf. But I highly doubt it would stay in place on our pot hole littered Michigan roads.
I think the dry erase paint would adhere to it well but the magnetic properties would be less because dry erase paint is thick like 3 coats of latex paint.
If it's inside the cabinet, you'd be better off attaching a thin sheet of metal to the cabinet door. Take your intended magnets to the store with you and test their "stickiness" to the sheets before you buy.
Do you have to paint over magnetic primer? If yes what kind of paint? I’m using it on a sign board that will be used outside (and brought in everyday) for 3 outside events for 3 signs to mark location directions and menu
Nate Large - Woodworking DIY & More I definitely noticed the settling by the time I got to coat 3. I had to really mix it up well with the stirring stick. I used it all within a few hours of having it shaken at Home Depot though. I had it shaken then immediately brought it home and started painting.
Read about Vila tips article, and he suggests having the can shaken by store, to ensure even distribution of particles, or if bought online to stir with a drill and paddle paint mixer attachment the one he recommends is long but will fit in 1-5 gallon buckets has a picture to show on purchase page. Skip the wooden stirring as it probably won't do the trick. It will just be uneven with its hold, the pulverized iron will separate and settle at the bottom. You're slicing🫡
It shouldn't, it's metal shavings inside and unless somehow metal turns into not metal in paint then it should always work. As he's stated the paint isn't a magnet itself just magnetic.
it depends on the strength of the magnet and the weight of the picture frame. You will be better of if you use rare earth magnets as they are much stronger
That hairstyle is a statement all by itself, but the suspenders take it to another level. 😂 Thanks. Every video before was sending me down the road of this stuff is a nonsense gimmick. I had never heard of a rare earth magnet before now. 😅
i use a strong magnet from a harddrive that i took apart and rub the magnet in one direction on the bit. it works fairly well. it lasts pretty long. and if the bit looses its magnetizing strength, just do it again.
Hey there, I really loved your video .. Thank you very much A quick question: I have laser-cut MDF letters that I want to paint with that primer so they stick to whiteboards, you think that will work?
I thought that if you used magnetic primer to paint a board, you could adhere ANY METAL OBJECT to the board (which is painted with the magnetic primer). Why would you need a "magnet" to adhere to another "magnet"? I thought that was the whole point of the magnetic primer -- you could paint any board with the magnetic primer to make it a magnetic peg board. (I could, just, use a piece of sheet metal to make a peg board to which I could adhere any magnet!)
I've been researching this product for a project. Turns out you can't grind up magnets and infuse it into paint and retain the magnetic effect. So basically all these primers are ferrous metal infused paints. Then you must use a very strong magnet to barely work. I think it would be easier to just use a large sheet metal sheet on the wall and paint over it. By the time you put on 6 layers of this stuff (with prepping, sanding and clean up) and barely get magnets to stick, it seems too much work for the poor end result.
Judy Sweat so I would say they do pretty well. Better than I had hoped after reading reviews. I did the 5 coats of magnetic primer then I did 2 coats of chalkboard paint of the same brand. I haven’t tested the chalkboard yet, but I’m a little concerned because the surface is rough from the bits of iron in the magnetic primer. However, even those cheap plastic alphabet magnets hang on the wall. They’re nowhere near as good as on the fridge, but they stay where I put them. And stronger magnets hold up papers. I’m going to get those rare earth magnets from amazon. I’ve read that they work amazingly well on magnetic paint.
I enjoyed the hell out of this. (Just fell down a rabbit hole over here, no intention to use the product. But if I run into a friend attempting a chalk wall I feel confident to give some unsolicited advice.)
Thanks friend
😂😂😂
Thanks for the demo. This saves me a lot of trial and error. I'm just making a magnetic surface to display my wife's magnet collection so it should be perfect!
What a gal... a good wife would be into stamps... they will stick to anything without the aid of a husband.. 😂
This was really helpful! I want to make a magnetic wall in my daughters playroom and make some wooden gears with magnets on the back, various other things for ger to play with. Im thinking for my application maybe sheet metal would be better.
For my purpose, I think this paint will work perfectly. I’m building a slot car track with some pretty big elevation changes. I’m going to use this paint to give me better downforce in some of the more intense curves. (One of which mimics Laguna Seca’s world famous Corkscrew.)
As it is, the roughly 3/16” rails are the only source of magnatraction in those areas and you can lose control VERY easily. My plan is to paint a 1”strip just inside & outside of the rails of my slot car track. The second coat will be 3/4” and the third will be 1/2”. I’m hoping to give a smoother, more controllable drift in those particularly tricky areas of the track.
This review was extremely helpful, THANKS!
I think you may have had better luck sealing/pre-priming the surface first to reduce the soak in. I'm actually surprised that it held at all with one thinish coat though, seems like decent stuff
Yes, great suggestion.
Best test demo on the net!! Thank you!!
i was looking for dnd tiles and movement prevention. seams like it would work wonders with in certain parameters... thankyou very much for the video.
If I used this. It would be for some kind of picture mural. Fantastic video. Glad I found this!!
Thank you so much!
Is the paint actually magnetized or does it just apply some metal to the surface so a magnet will stick to it?
Question. Could I use this magnetic paint then paint over it with chalkboard paint so I can use the same area for both magnetic and chalkboard????
I would assume instead of using latex paint I could use the chalkboard paint.
I have heard that you can that's what I am about to do
Hi! Can a magnetic primer be applied on metal sheet?
Nice video! I like the way you are to the point.
I considered using this on my enclosed work trailer door. I figured I might be able to attach a neodymium shelf. But I highly doubt it would stay in place on our pot hole littered Michigan roads.
Anyone know if this can hold kids magnetic tile toys?
It seems the smell is pretty strong, does it safe to paint on toddler's room?
🤔 What are it's contents? Great Question❣
Great Video! I keep 2 cans in my studio for small projects, I love it!
I really appreciate this demo.
Your welcome
Me too! 😁
How does the it do after applying dry erase paint instead of latex paint.
I think the dry erase paint would adhere to it well but the magnetic properties would be less because dry erase paint is thick like 3 coats of latex paint.
just found this today (2024) and still very helpful and loved the video! 🎉
Does a thickness gauge see it?
Any tips on how to take a magnetic wall down? Sanding it off?
Good question. I sanding might work. If it's on a hard surface then sand blasting might be a better option.
Hi!! Was that an N52 rare magnet?
I am thinking of painting the inside of a kitchen cabinet with this product to hold small magnetic spice tins. Thoughts?
It is an interesting idea with merit to explore.
If it's inside the cabinet, you'd be better off attaching a thin sheet of metal to the cabinet door. Take your intended magnets to the store with you and test their "stickiness" to the sheets before you buy.
Where did you find that rare small earth magnet? I can replace my magnets with these!!!
Home Depot, Lowes also has them too
I am making a magnetic poetry board for the kids at my library. Do you think this will hold flexible vinyl magnets? Thank you!
I would think I would with multiple coats.
So what happens if you do more than 3 coats of magnetic primer?
Your presentation style is excellent!
I’m using the magnetic primer and the chalkboard paint for my teen girls room. Do I have to use a foam roller?
Yes.
Do you have to paint over magnetic primer? If yes what kind of paint?
I’m using it on a sign board that will be used outside (and brought in everyday) for 3 outside events for 3 signs to mark location directions and menu
Any quality paint should work.
Love it. Very informative, thank you
Question! What happens if I don't put any paint over the primer? Is it hazardous?
I don't know for sure but I think it would be as safe as all other primers, which means it is safe.
Thank you!
Good tutorial. Thank you
IF you got 12 pieces of paper being held up by a magnet then i think its time to clear some clutter LUL
LOL
I tried this all all the iron filing clumped up on the roller and large chunks came flaking off.
This issue may be caused because, the flakes are heavy and quickly settle in the paint requiring constant agitation.
I used my paint as soon as I got it from
Home Depot and I had them shake it in the paint mixer things for me
It worked well
Nate Large - Woodworking DIY & More I definitely noticed the settling by the time I got to coat 3. I had to really mix it up well with the stirring stick. I used it all within a few hours of having it shaken at Home Depot though. I had it shaken then immediately brought it home and started painting.
@@cherishedvalor I never would have thought of that thank you
Read about Vila tips article, and he suggests having the can shaken by store, to ensure even distribution of particles, or if bought online to stir with a drill and paddle paint mixer attachment the one he recommends is long but will fit in 1-5 gallon buckets has a picture to show on purchase page. Skip the wooden stirring as it probably won't do the trick. It will just be uneven with its hold, the pulverized iron will separate and settle at the bottom. You're slicing🫡
I wonder if within time the board would lose the power ?
It shouldn't, it's metal shavings inside and unless somehow metal turns into not metal in paint then it should always work. As he's stated the paint isn't a magnet itself just magnetic.
Can it hold picture frames with magnets attached to the back?
it depends on the strength of the magnet and the weight of the picture frame. You will be better of if you use rare earth magnets as they are much stronger
making a bunch of chalkboards. If i commit to using exclusively rare earth magnets, would you recommend this product?
They worked for me.
@@natelarge thanks man. your video gave me exactly the info I wanted and I've made my first 3 chalkboards. They turned out great!
@@joemcconkey still work?
I did love your presentation and it was very helpful, thank you
well done Nate, thanks :D
That hairstyle is a statement all by itself, but the suspenders take it to another level. 😂
Thanks. Every video before was sending me down the road of this stuff is a nonsense gimmick. I had never heard of a rare earth magnet before now. 😅
Thank you so much for this info! I am looking at the product to dip the tip of my drill bits in. Trying to lose less hardware. Thoughts?
I won't do that if I were you. The paint isn't a magnet it is magnetic because it has metal shavings in it.
i use a strong magnet from a harddrive that i took apart and rub the magnet in one direction on the bit. it works fairly well. it lasts pretty long. and if the bit looses its magnetizing strength, just do it again.
Great demo.
Does it stink even after it dries. It’s been 2 days after we painted and it stinks pretty bad.
It is normal for paint to take a couple days to off gas. Some finishes can take up to 30 days.
Hey there, I really loved your video .. Thank you very much
A quick question: I have laser-cut MDF letters that I want to paint with that primer so they stick to whiteboards, you think that will work?
No
Very helpful, thanks 👍
Very helpful. Thanks.
Super helpful and great video, thanks man
I did 5 coats and I swear it’s not as good as you’d think lol
That's what I thought also.
It's good for a few sheets of paper but not much more.
II think I'll make mine from some scrap sheet metal.
Great video! Thank you!
Great job dude! Thanks
You bet!
great info!
Thank you ... very helpful !!!
Why not simply put a piece of non magnetic metal on the magnetic wall? If the wall is magnetic any metal object should still even if its not a magnet
Very cool! I jst bought some!
Woa, Nate from SOS right ??
Sure is my friend. Who goes there?
@@natelarge Alex Weston / MadSci
@@natelarge It's cool to see you doing stuff !! I wish u many blessings
Yes I remember you Alex. I'm happy to hear from you. Hope all is well with you and yours.
Thank you so much! Wow. Huge.
great video. Thanks!
I just want to keep grand daughters from putting in pins for simple posters and some school papers and drawings, I believe one coat will work.
VERY helpful video man! Subbed
Thanks.
Fantastic!
Just watched your video, oh how far has magnetically receptive products moved on ! We can hang 10kg off a painted wall over only 1 sq mtr 😁
Thank you because this paint isn’t cheap
I thought that if you used magnetic primer to paint a board, you could adhere ANY METAL OBJECT to the board (which is painted with the magnetic primer).
Why would you need a "magnet" to adhere to another "magnet"?
I thought that was the whole point of the magnetic primer -- you could paint any board with the magnetic primer to make it a magnetic peg board.
(I could, just, use a piece of sheet metal to make a peg board to which I could adhere any magnet!)
I've been researching this product for a project. Turns out you can't grind up magnets and infuse it into paint and retain the magnetic effect. So basically all these primers are ferrous metal infused paints. Then you must use a very strong magnet to barely work. I think it would be easier to just use a large sheet metal sheet on the wall and paint over it. By the time you put on 6 layers of this stuff (with prepping, sanding and clean up) and barely get magnets to stick, it seems too much work for the poor end result.
Problem is finding a large enough piece of sheet metal. I've been searching for days.
@@marcoavila2426 great summary!!
I literally just learned everything I needed to know about magnetic shit
Suuuuper helpful. Thank you. Sub’d
Sorry to say no it dose not.After five coats magnets ,even the strong ones did not stick, and yes I followed directions carefully.
Thanks for adding your experience Marty.
But....you’re using a magnet to test a magnet? Shouldn’t I just be testing something metal to see if it sticks to the paint? 🧐🤔
the paint is not a magnet it is magnetic because it has flakes of metal in it.
Probably should be called Metal-infused paint, since it is not actually magnetic. Just sayin’👍🏻
True.
Looks like black goo
No one at Home Depot told me I needed gloves or a mask. I did 5 coats of magnetic primer the other day.
how do magnets hold?
Judy Sweat so I would say they do pretty well. Better than I had hoped after reading reviews. I did the 5 coats of magnetic primer then I did 2 coats of chalkboard paint of the same brand. I haven’t tested the chalkboard yet, but I’m a little concerned because the surface is rough from the bits of iron in the magnetic primer. However, even those cheap plastic alphabet magnets hang on the wall. They’re nowhere near as good as on the fridge, but they stay where I put them. And stronger magnets hold up papers. I’m going to get those rare earth magnets from amazon. I’ve read that they work amazingly well on magnetic paint.
@@cherishedvalor 9 months later, is it still magnetic??
Will this work for coins? I'm working on a magic trick.
The primer has pieces of metal in it. The primer is not a magnet it is magnetic.
@@natelarge Too bad it's not clear. Since it is black people will see that I've done something to the coin.
@@jf8050 delete your comments, a magician never reveals his secrets! ;)
Thank you...you saved me money and mess....and remember folks ceramic magnets are way cheaper than the rare earth magnets!
After all you showed me, that magnetic paints are worthless for me. Thank you!
Glad I could help!
Comment
Iwantfreestuff1o f