What's Inside SPLAT-R-BALL MAGAZINE I Take Apart Splatrball SRB400 Round Mag & Put It Back Together

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии •

  • @reneewyzykowski6448
    @reneewyzykowski6448 Год назад +5

    Thank you so much for making this video. I had to take it apart, because I had the water beads jammed in the magazine, and as soon as I opened it all these parts started falling out and I was so scared. I wasn’t gonna be able to get it back together properly so thank you very much. This video was extremely helpful.

  • @w.agarcii_2172
    @w.agarcii_2172 2 года назад +1

    At 3:52 did you super glue it?

    • @engineerable
      @engineerable  2 года назад

      No, that was grease for the gears

    • @w.agarcii_2172
      @w.agarcii_2172 2 года назад

      @@engineerable where can I find the one you used? And what do I need to super glue? The wheel doesn’t spin when I shoot what can I do

    • @engineerable
      @engineerable  2 года назад

      @@w.agarcii_2172 is the motor spinning?

    • @w.agarcii_2172
      @w.agarcii_2172 2 года назад

      @@engineerable the white wheel no and I just bought it

    • @w.agarcii_2172
      @w.agarcii_2172 2 года назад

      @@engineerable it gets stopped by the thing you put grease on

  • @Evan11111.
    @Evan11111. 5 месяцев назад

    i can’t fix my mag the bullets don’t come up the little tube, is there any fix?

  • @KRE3P
    @KRE3P 6 месяцев назад

    I took mine apart when spray painting it and i lost my spring. Could you give the size of the spring and where I could buy it.

  • @diegoa75455
    @diegoa75455 Месяц назад

    Is the blue one the same inside?

  • @jasonsubie9161
    @jasonsubie9161 Год назад +1

    Super appreciate the amount of detail in this video!

  • @kelenrojas4489
    @kelenrojas4489 2 года назад +1

    Bro my "flap" or "trapdoor" came off and now i cant find it, is there any way i can buy one somewhere or do i just need a new mag

    • @engineerable
      @engineerable  2 года назад

      Cannot buy just a trap door. It does look like it would break off easy. Could put some tape over and replace tape occasionally.

  • @QuinnJohnson-ix9sz
    @QuinnJohnson-ix9sz 6 месяцев назад

    Hey! Do you know if the motor/gear machine can get wet? My did and I don't want it to break

    • @camdenmorgan3093
      @camdenmorgan3093 4 месяца назад

      It should be just fine mines been water logged a hundred times and still seems to work

  • @sound6808
    @sound6808 Год назад

    Would the gears inside of the mag strip if i use an 11 volt battery, or would you have to replace them with metal?

  • @Gravyards
    @Gravyards 11 месяцев назад

    I’m having an issue where my motor spins the opposite direction, making the orbeez not enter through the magazine to shoot it

    • @wickityb1232
      @wickityb1232 11 месяцев назад

      Idk if this will work. Try and reverse the motor output. Or change the directions of the gearbox

    • @engineerable
      @engineerable  11 месяцев назад

      Seems like your mag contacts are crossed. Take either the blaster or the mag apart and switch the contact positions.

  • @jonathanaguilera505
    @jonathanaguilera505 2 года назад

    I have to put some pressure to spin the motor do you know what I should do?

    • @engineerable
      @engineerable  2 года назад

      Pressure where?

    • @jonathanaguilera505
      @jonathanaguilera505 2 года назад

      @@engineerableon the gear thing, is it supposed to move smoothly when spinning it?

    • @engineerable
      @engineerable  2 года назад

      @@jonathanaguilera505 yes it should. The plastic can crack and it can get loose on the shaft. Glue it back on with super glue.

    • @jonathanaguilera505
      @jonathanaguilera505 2 года назад

      @@engineerable when I open the mag there’s little orbee pieces squished, the gear does not run smoothly at all what should I do to fix it

  • @cakegetsrevenge5522
    @cakegetsrevenge5522 2 года назад

    When I was modding the gun the white wire came undone from its soldering and doesn’t power the mag. can re-solder the wire back to its original position so that it powers the mag.

  • @raymondbetancourt6498
    @raymondbetancourt6498 2 года назад

    Does the splatter ball & Lightning blaster have the same clip. Or where can I get an extra clip for the Lightning?

    • @engineerable
      @engineerable  2 года назад +1

      Splatrball and Lightning Blaster mags are not interchangeable, I have tested. Lightning Blaster should be compatible with WELLS G36C mags, which are available here, but I have not tested these m.zhenduotoys.com/Wells-G36C-Magazine-p746039.html

    • @DEThobbies
      @DEThobbies Год назад

      What's the difference? Can't find any magazines anywhere. Did purchase the mag u posted but scared it doesn't fit.

  • @a.p.fortnite2980
    @a.p.fortnite2980 2 года назад

    hey what is the substance you put on the motor?

    • @engineerable
      @engineerable  2 года назад

      Super Lube Grease amzn.to/3JXpw3F

    • @a.p.fortnite2980
      @a.p.fortnite2980 2 года назад

      @@engineerable also what should i do if it stops spinning

    • @a.p.fortnite2980
      @a.p.fortnite2980 2 года назад

      is it just broken at that poitn

    • @engineerable
      @engineerable  2 года назад

      @@a.p.fortnite2980 probably, but could be a few issues. You need to test with a voltmeter to see if your getting power to the motor. Or maybe one of the gears are loose on the shaft.

  • @jMicc-706
    @jMicc-706 2 года назад

    Do u know why the motor in the magazine ain't spinning

    • @engineerable
      @engineerable  2 года назад

      Could be many things. You will have to debug. First test with a known working mag to rule out an issue in the blaster. If the other mag works, then it could be a burned out motor, loose gear that drives the gel balls (glue it back on with super glue), or loose wire.

    • @w.agarcii_2172
      @w.agarcii_2172 2 года назад

      @@engineerable do we glue it like in part 3:52?

    • @engineerable
      @engineerable  2 года назад

      @@w.agarcii_2172 that was grease for the gears

  • @theayuwoki3569
    @theayuwoki3569 2 года назад

    Hey great video overall, do you have the mesurements of the gear? It would help a lot.

    • @engineerable
      @engineerable  2 года назад

      I will take some measurements of motor and gear and post a new video.

    • @theayuwoki3569
      @theayuwoki3569 2 года назад

      @@engineerable Thanks a lot!!!

  • @u4jessii
    @u4jessii 2 года назад

    Can you do the splatrball gun srb1200

    • @engineerable
      @engineerable  2 года назад

      You want me to take apart the drum mag, or the gun?

    • @u4jessii
      @u4jessii 2 года назад

      @@engineerable drum mag

    • @u4jessii
      @u4jessii 2 года назад

      @@engineerable do you know why when I shoot my gun an orbee comes out but another obree just roll down the barrel when I ask downwards or ill shoot straight and have the gun pointing down and an orbee just rolls out from the barrel.....any answers please 🙏

    • @engineerable
      @engineerable  2 года назад +1

      @@u4jessii Sounds like they are not growing large enough. Leave them 4+ hours in water to grow, and you can keep them in water for a very long time till you are ready to use.

  • @Abdi0967
    @Abdi0967 2 года назад

    My gun isn’t shooting unless the mag is in it what should I do

    • @engineerable
      @engineerable  2 года назад

      The blaster only shoots when the mag is in...

    • @Abdi0967
      @Abdi0967 2 года назад

      I worded that kinda weird I meant that the gun doesn’t make any sort of noise unless the mag is in it some of my friends blasters would still make the noise even if the mag is not in

    • @engineerable
      @engineerable  2 года назад

      @@Abdi0967 yeah, that is strange, and means that the power is passing through the magazine to get to the main motor. That's not good, and means that something is wrong with the wires inside.

  • @juanagustinagustin7108
    @juanagustinagustin7108 6 месяцев назад

    Can you do a pulsar pro mag vídeo

  • @juanagustinagustin7108
    @juanagustinagustin7108 6 месяцев назад

    I took mine apart i put all the screws in i opens a little still

  • @Cheftyzz
    @Cheftyzz 2 года назад +1

    Can you also do a tracer mod for the sb400 plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz?

    • @engineerable
      @engineerable  2 года назад +1

      Working on it! I'm working on a no-solder mod so that it can be done easily without a soldering iron.

    • @Cheftyzz
      @Cheftyzz 2 года назад

      @@engineerable ok thankss

  • @Cheftyzz
    @Cheftyzz 2 года назад

    so confused what did you take out?

    • @engineerable
      @engineerable  2 года назад +1

      I didn't remove anything from this one. This is just instructions on how to take it apart and put back together. This is the video where I take out a divider to expand the capacity of the drum mag ruclips.net/video/Iv6YOa56EXc/видео.html

    • @Cheftyzz
      @Cheftyzz 2 года назад

      @@engineerable ohh

  • @grrrdffd2316
    @grrrdffd2316 5 месяцев назад +1

    Easy spring to lose I lost it

  • @goofy7186
    @goofy7186 2 года назад +2

    First! also great content I can tell u take your time to make well thought out videos. I discovered ur channel while I was researching splatrball, I also love modding things so thanks for all the great research u do. I appreciate it!

    • @engineerable
      @engineerable  2 года назад

      Watch the metal gear upgrade video ruclips.net/video/qQKaKdEUPCs/видео.html

  • @aubeornguerra9311
    @aubeornguerra9311 2 года назад

    Ye my gun stoped shooting but sounds fine people say it was the mag so I orders a drum hopefully that’s what it was

    • @engineerable
      @engineerable  2 года назад

      Could be some feeding issues also due to the nozzle not retracting far enough. The tappet may be bent or broken.

    • @aubeornguerra9311
      @aubeornguerra9311 2 года назад

      @@engineerable I don’t think anything in the gun is broken if that’s in the gun or is that in the magazine I haven’t dropped it or nothifn

    • @engineerable
      @engineerable  2 года назад

      @@aubeornguerra9311 I've had some of these not feed out of the box. The tappet is metal and sometimes it is bent out of wack and won't feed. You can tell if the magazine isn't working, because the little gear inside won't be spinning.

    • @sosori9920
      @sosori9920 2 года назад

      Mine wasn’t shooting at first n the thing was spinning but I cleaned it rn and now it’s not spinning so what should I do how do I fix it ?

    • @aubeornguerra9311
      @aubeornguerra9311 2 года назад

      @@sosori9920 idk that’s what happen to me to

  • @madmanMELLYTV
    @madmanMELLYTV 2 года назад

    My motor in my clip is spinning the wrong way

    • @engineerable
      @engineerable  2 года назад +1

      You need to switch the electrical contacts on the mag. Hopefully it's the mag that's backwards, and not your blaster.

  • @juanagustinagustin7108
    @juanagustinagustin7108 6 месяцев назад

    Its a pulsar pro