samsung: hotpoint im faster than u. ultima: actually i think u are samsung: will i beat you? ultima: idk… samsung: i white ultima: i grey samsung: im better looking ultima: both of us are! samsung: i think i have faster drum ultima: alr let’s just wash samsung: ok [End of transcript]
Say good bye soon to your washer if you're maintaining 1000+ rpm spinning...high spinning speeds are merely commercial thing and bearings will wear soon enough.stick to 800 rpm or even 600.
Everything you just said is all bull. And completely and utterly untrue. High spin speeds are a domestic thing. Not a commercial thing. Spinning at slow spin speeds at 800rpm or 600rpm instead of 1400rpm means drying in the tumble dryer for twice as long. Which in the long run will cost excessively more than the cost of 2 or 3 washing machines. While there is proof that 1800spin machines did go through bearings faster than 1600rpm models. Todays problems with bearings lie with the large capacity washers we now have. What has been proven is that liquid, gel and liquid tabs/pods. Have been proven to dry out the rubber bearing seal to disintegrate and fall away leading to bearings getting wet and failing.
Look out for paid reviews. I have had mine for 4 years, it has had three major faults, the Main PCB board broke after 2 years and 2 weeks Samsung initially said they would not help follow escalation of complaint they sent a repairman, Despite the fault code being given and knowing what the fault was he turned up without a replacement board, said it would be 2 weeks to order in a new one and he would return!. More time off work for the next appointment. Now only 4 years old the main bearings have gone. Samsung is refusing point blank to repair under warranty. The bearings cannot be replaced, the whole rear tub at the cost of £167, just for the part needs to be replaced. Do not buy Samsung, both the machine and customer service is appalling. Both Samsung and AO customer service is appalling. I have now replaced the unit (with a HOTPOINT, which was £60.00 cheaper on Amazon than AO!). My last Hotpoint lasted 9 years before it wore out and I brought the Samsung, I have learned my expensive lesson. I will never buy another Samsung product. (My large screen Samsung telly broke at 3years old too….)
You talk to any one of us washer fanatics. And all of us will tell you how over rated they are. This one is working fine but needs a softwear update. The other Samsung I have works fine but every so often jams up because of a board issue. That is only 3 years old.
1:31 Turn back up + 15 Quick Wash
1:53 Click 15 Quick Wash + 15 Quick Wash
3:06 Starting + 15 Quick Wash
7:11 Drain + Rinsing 3,
7:52 Rinsing 3, + Drain
8:45 Drain + Rinsing 2,
9:39 Rinsing 2, + final Drain
10:39 final Drain + final Rinsing 1,
11:35 final Rinsing 1, + final Spinning
13:30 final Spinning + Anti-Crease
16:25 Spinning + Anti-Crease
17:24 Anti-Crease + the end
18:20 the end
22:58 results
Minnies Got A Samsung Washing machine I like both of the washing machines
Samsung was already singing while Hot point was still reeling. Yeah Samsung ♥️
That cracking noise when Samsung spin is normal, and how it bounce like that?
samsung: hotpoint im faster than u.
ultima: actually i think u are
samsung: will i beat you?
ultima: idk…
samsung: i white
ultima: i grey
samsung: im better looking
ultima: both of us are!
samsung: i think i have faster drum
ultima: alr let’s just wash
samsung: ok
[End of transcript]
20:21 you missed the word *rpm* and It is not a center, it is a right!
Load 0:30 start 2:56 drain 5:15 first rinse 5:34 inter spin 5:34 9:09 final rinse 12:07 final spin 15:16 final spin 18:22 results end of video 19:03
Say good bye soon to your washer if you're maintaining 1000+ rpm spinning...high spinning speeds are merely commercial thing and bearings will wear soon enough.stick to 800 rpm or even 600.
Everything you just said is all bull. And completely and utterly untrue. High spin speeds are a domestic thing. Not a commercial thing. Spinning at slow spin speeds at 800rpm or 600rpm instead of 1400rpm means drying in the tumble dryer for twice as long. Which in the long run will cost excessively more than the cost of 2 or 3 washing machines. While there is proof that 1800spin machines did go through bearings faster than 1600rpm models. Todays problems with bearings lie with the large capacity washers we now have. What has been proven is that liquid, gel and liquid tabs/pods. Have been proven to dry out the rubber bearing seal to disintegrate and fall away leading to bearings getting wet and failing.
Samsung eco bubble washing machine 800 qpm 👍
💪
Kontakt
V
Kontakt H
But Bosch have quick 15 wash at 30c that dose 2 rinse but spin at 1200rpm
Which machine do you like better out of those two
+gta5 master 2014 the hotpoint. Despite how much work I have done on it. Indesits programming has improved alot.
whichwasher2007 I agree have you ever own a logik
Nsgfafsf
How to root the Samsung quick drive so I can change the ring tone.
Full spin for Samsung is 1400 rpm full spin for hotpoint is 1600 like it
Triple House щщщщщщщгрнппшшшшшшшщшшщшшщщщщщщщщщщщщщшшшшшшшшшшщщщщщщщщщщщщщщщщщщщщшщшщщщ
1st: Samsung +10
2nd: Hotpoint +5
Look out for paid reviews. I have had mine for 4 years, it has had three major faults, the Main PCB board broke after 2 years and 2 weeks Samsung initially said they would not help follow escalation of complaint they sent a repairman, Despite the fault code being given and knowing what the fault was he turned up without a replacement board, said it would be 2 weeks to order in a new one and he would return!. More time off work for the next appointment. Now only 4 years old the main bearings have gone. Samsung is refusing point blank to repair under warranty. The bearings cannot be replaced, the whole rear tub at the cost of £167, just for the part needs to be replaced. Do not buy Samsung, both the machine and customer service is appalling. Both Samsung and AO customer service is appalling.
I have now replaced the unit (with a HOTPOINT, which was £60.00 cheaper on Amazon than AO!). My last Hotpoint lasted 9 years before it wore out and I brought the Samsung, I have learned my expensive lesson. I will never buy another Samsung product. (My large screen Samsung telly broke at 3years old too….)
You talk to any one of us washer fanatics. And all of us will tell you how over rated they are. This one is working fine but needs a softwear update. The other Samsung I have works fine but every so often jams up because of a board issue. That is only 3 years old.
Gåä
Plug both into a power meter to show power usage.
They say samsung is 11 minutes and hotpoint still at 12
😂😂😂😂h hotpoint Still at 12 h😂😂😂😂😂😂h😂😂😂😂😂😂h😂😂😂😂😂😂😂😂
But my washing machine name is super general it has 15 quick wash and also 30 quick wash and the last one was 45 quick wash rinse 2 times and 800rpm
But the maximam spin is 1000rpm
And tomorrow my new Samsung washing machine will come digital inverter.
Can you do like a tour of all your washers together please?
+Itz Me Charl possibly
Neighbor
JBL pulse 4 Bluetooth телефон
JBL Bluetooth телефон
Даниел жумабек мен ғой
0:30 3:05 22:57 24:20
Start Inter spin
Samsung eco bubble winner 15:26
Аа
You mean 18:20
Hahah
0:18 0:26
40
Mission Failed Samsung Eco Bubble Died!
Hotpoint Ultima Wins
But my is 1000rpm
18:20
Bruno mars
Andre George Would you stop teasing with me?!
no
Bruno no
Andre George nooooo
Load 0:30 Start 3:05 Results 22:57
14 59
3:05
Do Sri C v I’m X X
LG 4 lifeee