@@EMPI_Inc sure I just did. Nice exhaust system. I have the same 4 into 1 headers with a small stainless single side muffler, instead of the twin pipes.
Thanks for the amazing video, I'm debating at at this if i go with 3761 are 3421 and i try to find a video reviewing again each other. i saw your noise and dyno. And i will not run the heat riser do the they are predrill and do Empi sell the cap also do the tin fit with 3421. Thanks
What happened to the collector? I mean where is the collector pipe, the four headers merge into a collector but then then ends on the side of that small muffler tube.. no tuned length collector pipe? Let me know, I would love to see a cutaway crosection of that collector / muffler to see whats going on, thanks.
What am I missing here, both heat riser flanges are attached identically on both sides? This means heat will not transfer from one side to the other. In comparison to my old german one, one side is like those on yours, but the other one feeds down to the actual exhaust, in a low pressure environment thus creating transfer across the manifold. Seems like yours here will have both exhaust pulses competing and with no hi/lo pressure differential will easily clog?
Same non working design they have had on "performance" headers for years, they try to Wow you will "cad designed" But as you say that design does not have a low and high pressure source to actually make head flow through the riser.
you are right, there is a metal gasket you can get that is almost solid, has a like a less than 5mm hole. this creates a pressure differential or something and makes the gas flow from one side to the other.
Why does it look like the muffler is not level with the rest of the header? Seems as if the driver's side of the muffler is slightly lower and the passenger side is higher...a slight 5 degree cant to the left as compared to the two top (level?) tubes from cylinders 2 and 4?
@@robmullner16 Tell Empi to make a real SS Polish Exhaust for a real 2332 CC and up for the big boys. We dont need an other copy cat exhaust that already is out there Performance Type Severly Needed Now. A-1 is ridiculous a waitng game as far supply and demand is involved ? LMK ?
Thanks Nate we have many all new CAD designed systems launching this summer please stay tuned and we will release more info including sounds clips and dyno results
@@nategio2648 I’ve had 2 inch and five eights one stainless one raw with the stainless muffler the low down one they looked great sounded great but they did not hold up the stainless steel was so thin especially on the muffler constantly cracked I just got this one in the video for a smaller engine on a class 11 style bug haven’t ran it yet but it does seem to be pretty heavy duty
![EMPI's NEW SIDEFLOW System [Type 1]!! (Sound Clips)](/img/1.gif)
Great video !!! Just ordered my 00-3761-0 !!! Can’t wait to install it on my 68 beetle . Go EMPI Go !!! Kept up the great work . Big fan Alex from NJ
thanks Alex!
did you install in the end?
@@ZAKEREE yes there great
@@newalex1970 Can you send me a vid of your exhaust?
I would have liked to hear the exhaust on a running engine. Nice looking system.
Please visit our website to hear the system empius.com/products/stainless-steel-2-tip-exhaust-system/
@@EMPI_Inc sure I just did. Nice exhaust system. I have the same 4 into 1 headers with a small stainless single side muffler, instead of the twin pipes.
Thanks for the amazing video, I'm debating at at this if i go with 3761 are 3421 and i try to find a video reviewing again each other. i saw your noise and dyno. And i will not run the heat riser do the they are predrill and do Empi sell the cap also do the tin fit with 3421. Thanks
What happened to the collector? I mean where is the collector pipe, the four headers merge into a collector but then then ends on the side of that small muffler tube.. no tuned length collector pipe? Let me know, I would love to see a cutaway crosection of that collector / muffler to see whats going on, thanks.
Is al the j tubes the same size
Meaning if I buy this can I keep my same j tubes I already have
What size of J tubes is needed?
Are these available without the heat risers?
Will this exhaust work on a 1200cc 40hp?
Hi Shane we will confirm fitment with our Tech team and let you know asap
Hi Shane, sorry the 00-3761-0 exhaust will not fit, please see our p/n 00-3766-0 that will fit empius.com/products/2-tip-gt-exhaust-system/
@@EMPI_Inc Thanks!
Is there a stainless exhaust like this for a 1200cc
Hi Andy we will ask our Tech dept for more info and share asap
Andy, please see this exhaust for your 1200 empius.com/products/2-tip-gt-exhaust-system/
What am I missing here, both heat riser flanges are attached identically on both sides? This means heat will not transfer from one side to the other. In comparison to my old german one, one side is like those on yours, but the other one feeds down to the actual exhaust, in a low pressure environment thus creating transfer across the manifold. Seems like yours here will have both exhaust pulses competing and with no hi/lo pressure differential will easily clog?
thanks Bert we will share your comments with our Engineering team and share feedback asap
Same non working design they have had on "performance" headers for years, they try to Wow you will "cad designed" But as you say that design does not have a low and high pressure source to actually make head flow through the riser.
@@krusher74 Copy, and they never did get back to me "ASAP", because I was at the time, in the market for one.
you are right, there is a metal gasket you can get that is almost solid, has a like a less than 5mm hole. this creates a pressure differential or something and makes the gas flow from one side to the other.
Hi.....will this system allow clearance for a spin on oil pump filter ? Thank You
Unfortunately it doesn't
Why does it look like the muffler is not level with the rest of the header? Seems as if the driver's side of the muffler is slightly lower and the passenger side is higher...a slight 5 degree cant to the left as compared to the two top (level?) tubes from cylinders 2 and 4?
probably just the way Im holding it, the muffler is level and the system fits perfectly- even on a beat up bug like our development mule!
@@robmullner16 Tell Empi to make a real SS Polish Exhaust for a real 2332 CC and up for the big boys. We dont need an other copy cat exhaust that already is out there Performance Type Severly Needed Now. A-1 is ridiculous a waitng game as far supply and demand is involved ? LMK ?
Thanks Nate we have many all new CAD designed systems launching this summer please stay tuned and we will release more info including sounds clips and dyno results
I know what you mean by looking uneven or lopsided but when you bolt it up it does seem to be level
@@nategio2648 I’ve had 2 inch and five eights one stainless one raw with the stainless muffler the low down one they looked great sounded great but they did not hold up the stainless steel was so thin especially on the muffler constantly cracked I just got this one in the video for a smaller engine on a class 11 style bug haven’t ran it yet but it does seem to be pretty heavy duty
Clearance for EMPI FULL FLOW OIL FILTER PUMPS and/or Mexican Oil filter?
will confirm with our Tech dept and let you know asap!
The 00-3761-0 exhaust will clear the EMPI full flow oil filter pumps
304 is magnetic and does rust , better than steel , but not the best , I use 316 and it's lasts . What's the better it's chinese made
thanks for sharing your thoughts