Super porovnávacie video. Chcem sa opýtať, kde zohnať to tesnenie filtra pri A3, ktoré spomínate vo videu? Chcem na nej urobiť ten dodo uprgate ale neviem kde zohnať súčiastky. Viete mi poradiť? Ďakujem
Ahoj, podstatné je delenie a určenie si vodiacej drážky tak aby sedela lišta, napr táto je krátka www.hsparts.cz/oregon-vodici-lista-advancecut-13-33-cm-325-058-15-mm-138pxbk095_p3820?gclid=Cj0KCQjwlumhBhClARIsABO6p-wuk46rbpkvLGTCcUxK8NoaxFPdQ09dU9EbtCjC9huNmO3rfPxI55UaAhd1EALw_wcB, samozrejme ale treba kúpiť aj rovnako krátku reťaz, osobne by som odborúčal 16" listu teda 40cm. Treba hľadať delenie 0.325" a ostatné teda reťaz a lištu potom dopárovať. Kvôli krúteniu a pevnosti sa dáva šírka 0.058" teda 1,5mm.
Hello! since I do not understand your language, please write briefly which model of the two you recommend?you can write advantages and disadvantages of each of them. In Bulgaria, there are currently both models in kaufland and lidl. I have two choices, which one to choose. A2 or B3? The A2 has good reviews. I don't find anything about B3. It must be a new model. I would appreciate an answer and guidance! Greetings
Hello, firstly thank you for your comment. As shown in video you can spot differencies in engine block, filter, different oil/petrol caps. Diferent handles. Same engine same chain, bar. A2 has better filter(more sealings) on B3 i ll put my own O ring seals as the provided seal is not functioning. For me B3 is better because in slovakia it was cheaper. and the handle fits my hand better. On A2 i dont like that the muffler leaks (gray spots on top) both mufflers burn wood if close and long on same spot. Hope it helps. If their price is similar still i would pick B3, if A2 is cheaper i would buy the cheaper one. But for me its all about comfort of holding as both chainsaw vibrate a lot.
@@boredpatrik Thanks so much for the comment! Does the differences in the hood and brake of the B3 work better and is it more wear-resistant? It also looks like the entire brake cover is different on both models. Which exhaust looks noisier, more hopeful and with good workmanship? The prices of both models are the same here. Is the B3 a new A2? Thank you
@@valev79 Yes, the brake on B3 goes smaller distance to activate, and also is better made (firm/strong). The cover is different because b3 brake mechanism is in the plastic, the A2 is clasic in case of chinese chainsaws. The exchaust it self is better on B3 but the seal between cylinder and exchaust is better on A2 as shown on B3 there is "leak". B3 is the newest model made by Grizzly. the A1 and A2 are scheppach made. (diference between A1 and A2 is that A1 had oregon chain and guide bar)
@@boredpatrik Oh, very useful information! Thank you! But I had a few more questions:) Can this leak between the cylinder and the exhaust be avoided and would it cause problems besides the spotting and eventual smell of burnt oil? Is Grizzly the better brand of the two? B3 what bus and chain is it with? Is it easy to find a backup chain and spare consumables at all, if necessary? Overall, I've felt a closer B3. A2 looks a bit more massive and B3 looks more ergonomic. 😊
@@valev79 the leak is maybe because i took it apart for two videos, so maybe i did not tighten it strongly enought the first time, there is slight problem with it as it can burn the piston of not properly taking out the fumes . (heat acumulation). I mean i always feel better with grizzly branded tools (mainly because of bateries like PAP20B3 they are the best in comparison to owin/Kompernass). chain pitch 0,325", gauge 0,058" (you can watch my video for B3 with english subtitels (some parts of it)). so standard , easy to buy. No problem with spare parts as you can make the saw from 5other diferent brands(for both version). you can search for hecht, fieldmann, strauss, demon brands the same stuff. same holes for bolds, From lidl you have 3year warranty so thats why most people buy fromt them in comparison to brands i mentioned before. Or just search for 53cc chinese chainsaw.
Ahoj, v zásade tie píly sú podobné, chyby a problémy tiež, ak by som mal kupovať tento typ čínskej píly tak podľa ceny, výhodou je u parkside 3 ročná záruka. ale viac ako 80eur to cenu nemá.
Mám tu A2 cca 9den popilene 4m3 roztrhlo sa štartovacie lanko, píla nevládze piliť 50cm buky . Ostáva stať reťaz. A ďalšia vec akú reťaz tam mám a kde zohnať keď drážka je 1.47
Roztrhnutie štartovacieho lanka je bežná záležitosť, hrošie by bolo keby sa zlomil "štartér", nemôžete čakať, že tvrdé drevo ako buk o priemere 50cm bude táto píla kúsať s radosťou, 18" je skutočne maximum pre typ tejto čínskej píly až by sa dalo povedať, že zavádzajú. Podstatné je delenie, ktoré je 0,325", drážka sa mení s lištou. takže reťaz kúpite všade, v tescu, obi, merkury market, takže úplne v všade nakoľko tento typ reťaze je veľmi rozšírený (www.hsparts.sk/hs-parts-pilovy-retaz-325-058-15-mm-72-clankov-hranaty-zub-pre-husqvarna-36-40-42-45-51-55-240-242-254-257-262-338xpt-340-345-346-351-353-359-435-445-450-455-460_p3450 ) Označenie podľa Oregona : 21LPX072E, údaje na obale Pílový reťaz .325" .058" (1,5 mm) 72 čl.
Ja mam b3 ku asi 2 dni zatial napilene malo minul som jednu nádrž benzinu. Takže nic koc zatial. Ale reže pekne aj cca drevo o priemere 25cm a hrubšie asi rezat nikdy nebudem zatial spokojny.
presne na to je tento typ píly určený, lacný a sem tam porezať drevo, dá sa s ňou aj viac ale vtedy je cítiť nedostatočný anti-vibračný systém a je aj väčšia spotreba
@@boredpatrik jasne kebyže potrebujem narezat kazdy rok 25 kubikov tak si kupim stroj za 300-400€ niečo kvalitne znackove. Ale ja som si to kupil kvoli tomu že som kupoval pozemok kde som potreboval vypilit par stromov nejake trocha upravit aby vypadali. A občas si s tym napilit drevo pod guláš. To je asi tak všetko. Na to moje občasne domace pilenie je ten čínsky wu yang 😂či aky nápis som našiel na spodku dostačujuci.
i have my fieldmann from 2014 and its running till this day, its china overall just from different parts, i just wanted to show differencies as people were asking what they are :)
B3 is using parts which are you might say more standard. The A2 is very poorly built, I would suggest to replace pull starter rope and handle on these models before they cause a problem, they are very poor quality. breaking the rope will damage the spring assembly and that is no fun to replace.
Ano.... aj Trabant bol o ničom ak si ho porovnal s Mercedesom. Ale odviezol a nepršalo na teba . Tak aj píla ak potrebujem za rok porezať 2-3 kubíky dreva nemusím mať na to doma pílu za 400 euro.
Bonjour, Merci pour cette comparaison, je viens d'acheter une B3 et je ne comprenais pas la différence. Sur le site de lidel n'est pas clair? Merci
Skvělé video! Moc díky ;-)
Ďakujem za pochvalu :) .
Super video krásná práce 👍👍👍👍🙂 jseš borec 😮😮😊😊😊
Ďakujem za pochvalu :)
Are this made by Einhell just like rest of Parkside electric hand tools???
Grizzly tools and Scheppach
scheppach buys (for A2 version, Grizlly for B3) it from china, but manufacturer is hangzou china
Super porovnávacie video. Chcem sa opýtať, kde zohnať to tesnenie filtra pri A3, ktoré spomínate vo videu? Chcem na nej urobiť ten dodo uprgate ale neviem kde zohnať súčiastky. Viete mi poradiť? Ďakujem
osobne som tam dal tri gulaté gumičky na seba o tom priemere(vodárenské), ten vrchný kryt to pritlačí.
@@boredpatrik Viete mi povedať aj o aky priemer a samotnu hrúbku toho tesnenia sa jedná? Ďakujem
@@peterbujnak5110 R14 vnútorný priemer(ID) 19mm a hrúbka(SD) 2,65mm, je to z parkside sady tesnení
Zdravím je možné do A2 dát menší vodící lištu? Pátrám po nějaké na internetu a nemůžu žádnou vhodnou najít, pokud to vůbec jde. Díky.
Ahoj, podstatné je delenie a určenie si vodiacej drážky tak aby sedela lišta, napr táto je krátka www.hsparts.cz/oregon-vodici-lista-advancecut-13-33-cm-325-058-15-mm-138pxbk095_p3820?gclid=Cj0KCQjwlumhBhClARIsABO6p-wuk46rbpkvLGTCcUxK8NoaxFPdQ09dU9EbtCjC9huNmO3rfPxI55UaAhd1EALw_wcB, samozrejme ale treba kúpiť aj rovnako krátku reťaz, osobne by som odborúčal 16" listu teda 40cm. Treba hľadať delenie 0.325" a ostatné teda reťaz a lištu potom dopárovať. Kvôli krúteniu a pevnosti sa dáva šírka 0.058" teda 1,5mm.
@@boredpatrik Díky moc.
Hello! since I do not understand your language, please write briefly which model of the two you recommend?you can write advantages and disadvantages of each of them. In Bulgaria, there are currently both models in kaufland and lidl. I have two choices, which one to choose. A2 or B3? The A2 has good reviews. I don't find anything about B3. It must be a new model. I would appreciate an answer and guidance! Greetings
Hello, firstly thank you for your comment. As shown in video you can spot differencies in engine block, filter, different oil/petrol caps. Diferent handles. Same engine same chain, bar. A2 has better filter(more sealings) on B3 i ll put my own O ring seals as the provided seal is not functioning. For me B3 is better because in slovakia it was cheaper. and the handle fits my hand better. On A2 i dont like that the muffler leaks (gray spots on top) both mufflers burn wood if close and long on same spot. Hope it helps. If their price is similar still i would pick B3, if A2 is cheaper i would buy the cheaper one. But for me its all about comfort of holding as both chainsaw vibrate a lot.
@@boredpatrik Thanks so much for the comment! Does the differences in the hood and brake of the B3 work better and is it more wear-resistant? It also looks like the entire brake cover is different on both models. Which exhaust looks noisier, more hopeful and with good workmanship? The prices of both models are the same here. Is the B3 a new A2? Thank you
@@valev79 Yes, the brake on B3 goes smaller distance to activate, and also is better made (firm/strong). The cover is different because b3 brake mechanism is in the plastic, the A2 is clasic in case of chinese chainsaws. The exchaust it self is better on B3 but the seal between cylinder and exchaust is better on A2 as shown on B3 there is "leak". B3 is the newest model made by Grizzly. the A1 and A2 are scheppach made. (diference between A1 and A2 is that A1 had oregon chain and guide bar)
@@boredpatrik Oh, very useful information! Thank you! But I had a few more questions:) Can this leak between the cylinder and the exhaust be avoided and would it cause problems besides the spotting and eventual smell of burnt oil? Is Grizzly the better brand of the two? B3 what bus and chain is it with? Is it easy to find a backup chain and spare consumables at all, if necessary? Overall, I've felt a closer B3. A2 looks a bit more massive and B3 looks more ergonomic. 😊
@@valev79 the leak is maybe because i took it apart for two videos, so maybe i did not tighten it strongly enought the first time, there is slight problem with it as it can burn the piston of not properly taking out the fumes . (heat acumulation). I mean i always feel better with grizzly branded tools (mainly because of bateries like PAP20B3 they are the best in comparison to owin/Kompernass). chain pitch 0,325", gauge 0,058" (you can watch my video for B3 with english subtitels (some parts of it)). so standard , easy to buy. No problem with spare parts as you can make the saw from 5other diferent brands(for both version). you can search for hecht, fieldmann, strauss, demon brands the same stuff. same holes for bolds, From lidl you have 3year warranty so thats why most people buy fromt them in comparison to brands i mentioned before. Or just search for 53cc chinese chainsaw.
Which one is heavier?
these chinese chainsaws are both heavy by gram diference, i would decide by price.
A2 6,65 kg - B3 5,7 kg
Co radšej Parkside alebo Fieldmann?
Ahoj, v zásade tie píly sú podobné, chyby a problémy tiež, ak by som mal kupovať tento typ čínskej píly tak podľa ceny, výhodou je u parkside 3 ročná záruka. ale viac ako 80eur to cenu nemá.
Vdaka
Mám tu A2 cca 9den popilene 4m3 roztrhlo sa štartovacie lanko, píla nevládze piliť 50cm buky . Ostáva stať reťaz. A ďalšia vec akú reťaz tam mám a kde zohnať keď drážka je 1.47
Roztrhnutie štartovacieho lanka je bežná záležitosť, hrošie by bolo keby sa zlomil "štartér", nemôžete čakať, že tvrdé drevo ako buk o priemere 50cm bude táto píla kúsať s radosťou, 18" je skutočne maximum pre typ tejto čínskej píly až by sa dalo povedať, že zavádzajú. Podstatné je delenie, ktoré je 0,325", drážka sa mení s lištou. takže reťaz kúpite všade, v tescu, obi, merkury market, takže úplne v všade nakoľko tento typ reťaze je veľmi rozšírený (www.hsparts.sk/hs-parts-pilovy-retaz-325-058-15-mm-72-clankov-hranaty-zub-pre-husqvarna-36-40-42-45-51-55-240-242-254-257-262-338xpt-340-345-346-351-353-359-435-445-450-455-460_p3450 ) Označenie podľa Oregona : 21LPX072E, údaje na obale Pílový reťaz .325" .058" (1,5 mm) 72 čl.
@@boredpatrik DIK len ja tam nemám Oregon lištu ale parkside a je tam písané 1.47 tak keď tam dám 1.5 nebude to drhnuť?
@@MsDuppy určite nie oni do toho návodu popíšu čo chcú. Preto sa to aj často udáva v palcoch teda 0.058"
Ja mam b3 ku asi 2 dni zatial napilene malo minul som jednu nádrž benzinu. Takže nic koc zatial. Ale reže pekne aj cca drevo o priemere 25cm a hrubšie asi rezat nikdy nebudem zatial spokojny.
presne na to je tento typ píly určený, lacný a sem tam porezať drevo, dá sa s ňou aj viac ale vtedy je cítiť nedostatočný anti-vibračný systém a je aj väčšia spotreba
@@boredpatrik jasne kebyže potrebujem narezat kazdy rok 25 kubikov tak si kupim stroj za 300-400€ niečo kvalitne znackove. Ale ja som si to kupil kvoli tomu že som kupoval pozemok kde som potreboval vypilit par stromov nejake trocha upravit aby vypadali. A občas si s tym napilit drevo pod guláš. To je asi tak všetko. Na to moje občasne domace pilenie je ten čínsky wu yang 😂či aky nápis som našiel na spodku dostačujuci.
A1 i A2 ok,ove nove mi se ne svidjaju,imam A2 vec 2 god extra je!
i have my fieldmann from 2014 and its running till this day, its china overall just from different parts, i just wanted to show differencies as people were asking what they are :)
PBKS 53 A1 is the best
why?
B3 is using parts which are you might say more standard. The A2 is very poorly built, I would suggest to replace pull starter rope and handle on these models before they cause a problem, they are very poor quality. breaking the rope will damage the spring assembly and that is no fun to replace.
Ciao Parlare in Italiano. Grazie.
Toto je píla o ničom
samozrejme na moju Hq61 a 365xp sa to nechytá, ale čínske píly si v domácnostiach našli svoje miesto.
Ano.... aj Trabant bol o ničom ak si ho porovnal s Mercedesom. Ale odviezol a nepršalo na teba . Tak aj píla ak potrebujem za rok porezať 2-3 kubíky dreva nemusím mať na to doma pílu za 400 euro.
O ničom je tvoje komentár.