Just purchased the Curve after researching all the robo vacuums. Thank you for posting this super informative set up video for the Curve. I subbed just for the follow up info on this product. Great job and keep it up!
Hello, may I ask your advice? The robot cleans the room and the mop, then returns, cleans the mops and returns to the room and mops a second time. Is there somewhere to turn it off? I have it set to repeat only once.. Thank you.
I preordered this unit in September and also received a military discount along with getting a Dyad Air all for $1260. Its the best robot I've used to date and I love the single dock design. The adaptilift allows it to go places where my other robots would get stuck. Its not perfect but its a keeper and much better than the master I had. I also use a surge protector at the plug to protect against lightning strikes. The flex arm deploys in all modes for me and the split brush design stays clean. I clean the HEPA filter every two weeks. I also use Pinalen floor cleaning solution which also limits odors in the dirty water tank. My only complaint so far is that it sees thick mats in the kitchen as thresholds from time to time forcing me to delete them on the map. Mine has received two firmware updates since I've had it.
I purchased it for $1,300, but I'm still deciding whether to keep it. My main issue is that it's supposed to "jump" over all obstacles, but it struggles to do so effectively. I like the product overall, but I want to compare it to the Z and the Dream 400, as I believe they belong in the same category.
It’s so hard keep up with 800 robot vacuum flowing onto the market it’s like went from auto empty to nasa tech in just few years so many bots out rn hard pick just one 🤣
Honesty, been robot vacuum hunting for the past 2 months and I still gotten no where of whats the best for what i need. Down to three, Dreame X40 Ultra, This one and the Roborockk Qrevo master, but I heard the Dream X50 coming soon so not sure what to do 💀
It was on sale for $1200-$1300 about a month ago. I bet it will have good Black Friday deals before they come out with the new version in January that removes the mop pads.
Getting caught up in the cord would irritate me if I just spent $1,600 on it. I got the Eufy S1 Pro on sale for $999 during Prime Days and it's been great. The self cleaning roller mop is terrific as it doesn't smear the dirt but cleans the mop and stores the dirty water on board. Because of the self cleaning it also doesn't have to go back to the base to clean the mop. It has forward facing LIDAR instead of the dome on top which makes it slimmer. And it works great, along with its other sensors and camera it's never gotten stuck even when cleaning in complete darkness. It's a great robot vac and if you catch it on sale, an incredible value.
Thanks for the unboxing and review. I'm conflicted now, I just returned my Master in hopes of buying the Curv for Black Friday. The reason I did this is it supposedly: has better roller for pet hair, bigger vacuum chamber, bigger battery. Now I'm not sure if I should get the Master again or still go Curv or hold off for the next flagship (S9 MaxV Ultra... when would that be??).
I like it but we like to use a certain floor chemical on our floors and water does not cut it. If it could use the chemical separately and use the clean water to clean after I would definitely get it.
@@JustADad Hi, one more question. Maybe i missed it in your video, but do you know, how many squarre ft. does the robot manage to mop, with its onboard tank? Thanks again.
I’ve been a big fan of Narwal since the Freo X Ultra (from Costco). I recently picked up the Freo Z and it is levels above the Freo X. My tile floors look spotless, it cleans in nice patterns starting from outside then inside hitting ever corner of my place. The object avoidance is game changing from the Freo X too. I purposely left all my charging cables on the ground and it avoids all of that. If you have dog pads on the ground, you will need to block those zones off as it doesn’t pick up dog pads. I’m not sure what the electrolyting of the water does lol. And the heating of the mop is awesome too as it doesn’t have a wet mop smell after drying. After two weeks, there is zero wet mop smell from the pads after drying. Best 1300 investment I made yet. Plus I got it from Costco so practically warranty built in
Because the other roborock's do it, maybe it needs a firmware update? I'm on fence because of the price, and seeing it fail on stains & cords. It's not something I'd expect from a $1500 10th gen machine.
So why does this robot cost a lot of money? If he doesn't know how to avoid the cable And he doesn't know how to do a repeated wash if there are stains
lol il monte sur les cables son par choc touche 1000 fois les objets, sa brosse ne sort presque jamais, et dans les angle c’est aussi salle qu’avec un aspirateur à 200€ quel honte, il est vraiment nul ce robot aller chez dream
Just purchased the Curve after researching all the robo vacuums. Thank you for posting this super informative set up video for the Curve. I subbed just for the follow up info on this product. Great job and keep it up!
Glad it was helpful!
I just purchased this one based off you’re videos on it. Thank you . Your videos are very helpful and informative.
How do you like it? I'm still undecided
Thank you very much for your unboxing video Sir. You explained every detail possible for the customer.
Glad it was helpful!
Does this come with the cleaning solution?
Hello, may I ask your advice? The robot cleans the room and the mop, then returns, cleans the mops and returns to the room and mops a second time. Is there somewhere to turn it off? I have it set to repeat only once.. Thank you.
Do you have a Robot Vacuum Ranking top list?
This would be good
I preordered this unit in September and also received a military discount along with getting a Dyad Air all for $1260. Its the best robot I've used to date and I love the single dock design. The adaptilift allows it to go places where my other robots would get stuck. Its not perfect but its a keeper and much better than the master I had. I also use a surge protector at the plug to protect against lightning strikes. The flex arm deploys in all modes for me and the split brush design stays clean. I clean the HEPA filter every two weeks. I also use Pinalen floor cleaning solution which also limits odors in the dirty water tank. My only complaint so far is that it sees thick mats in the kitchen as thresholds from time to time forcing me to delete them on the map. Mine has received two firmware updates since I've had it.
You void your warranty if you use something other than roborock's omo. Sounds like a great robot! :)
Thanks for sharing your experience. Can you tell me how well the dock's self cleaning performs?
God bless you kind sir for your military service 🙏 and God bless President Trump
I purchased it for $1,300, but I'm still deciding whether to keep it. My main issue is that it's supposed to "jump" over all obstacles, but it struggles to do so effectively. I like the product overall, but I want to compare it to the Z and the Dream 400, as I believe they belong in the same category.
I have that vidoe coming soon. maybe this week
It’s so hard keep up with 800 robot vacuum flowing onto the market it’s like went from auto empty to nasa tech in just few years so many bots out rn hard pick just one 🤣
Honesty, been robot vacuum hunting for the past 2 months and I still gotten no where of whats the best for what i need. Down to three, Dreame X40 Ultra, This one and the Roborockk Qrevo master, but I heard the Dream X50 coming soon so not sure what to do 💀
@@benlezmh1835the best of the best is the x40 ultra with the Tricut brush attachment the x50 won’t come out for a while
Dreame L40 is good too, ranked higher on vacuumwars
@@benlezmh1835just get the Roborock curv it has 18,500pa and anti tangle it works great! 👍
Great video completely explains thank you very much I was looking for that one before I start using mine!!! GOD bless you 🙏🫠
It was on sale for $1200-$1300 about a month ago. I bet it will have good Black Friday deals before they come out with the new version in January that removes the mop pads.
Could you please do a video with Roborock Saros Z70?
and Saros 10R please
yes as soon as they start to sell it I am getting it
Thank you! I’m waiting for mine to arrive
Hope you like it!
Hi I saw your review and I bought it, I noticed during the washing and water loading that it is very noisy what do you think?
It is a little loud
What do you think is better? the dreame x40 or the roborock qrevo curv
I’d like to know too😊
I have the same question. Which one - dreame 40x or this one?
Getting caught up in the cord would irritate me if I just spent $1,600 on it. I got the Eufy S1 Pro on sale for $999 during Prime Days and it's been great. The self cleaning roller mop is terrific as it doesn't smear the dirt but cleans the mop and stores the dirty water on board. Because of the self cleaning it also doesn't have to go back to the base to clean the mop. It has forward facing LIDAR instead of the dome on top which makes it slimmer. And it works great, along with its other sensors and camera it's never gotten stuck even when cleaning in complete darkness. It's a great robot vac and if you catch it on sale, an incredible value.
Thankfully they did an update and it’s so much better now
Thankfully they did an update and it’s so much better now
What if you have a two story house can you use the vacuum for upstairs and downstairs?
Thanks a lot for the review!
If you could buy this or an X40 ultra, which would you go for?
Thanks for the unboxing and review. I'm conflicted now, I just returned my Master in hopes of buying the Curv for Black Friday. The reason I did this is it supposedly: has better roller for pet hair, bigger vacuum chamber, bigger battery. Now I'm not sure if I should get the Master again or still go Curv or hold off for the next flagship (S9 MaxV Ultra... when would that be??).
I like it but we like to use a certain floor chemical on our floors and water does not cut it. If it could use the chemical separately and use the clean water to clean after I would definitely get it.
Thanks for the video. If possible please consider testing the Dreame L40 Ultra. It looks like at steal for the feature set.
Do the s8 max ultra
Hi. So any news regarding the remop problem, is it now working ok, is it a software bugg, that will get solved?
yes the remopping is working great!
@@JustADad Hi, one more question. Maybe i missed it in your video, but do you know, how many squarre ft. does the robot manage to mop, with its onboard tank? Thanks again.
@@JustADadHi! Do you know why it didn't remop at the time of filming? Was it a setting? Thank you!
No auto solutions dispenser?
no
My front wheel seems to be locked
My roborock dockingstaion dont stop to dry the mopps so I must send him back
Can’t get mine till Christmas because it is too expensive
Curve vs Freo Z which is better?
I’ve been a big fan of Narwal since the Freo X Ultra (from Costco). I recently picked up the Freo Z and it is levels above the Freo X. My tile floors look spotless, it cleans in nice patterns starting from outside then inside hitting ever corner of my place. The object avoidance is game changing from the Freo X too. I purposely left all my charging cables on the ground and it avoids all of that. If you have dog pads on the ground, you will need to block those zones off as it doesn’t pick up dog pads. I’m not sure what the electrolyting of the water does lol. And the heating of the mop is awesome too as it doesn’t have a wet mop smell after drying. After two weeks, there is zero wet mop smell from the pads after drying. Best 1300 investment I made yet. Plus I got it from Costco so practically warranty built in
Wow. Eating that cable.
Please can you review the Dreame L40 Ultra?
it just posted
Wow try making a lift test
You didn’t tell us what comes in the box. How many filters, brushes, bags, etc.
only one extra dust bag comes in it, sorry
Because the other roborock's do it, maybe it needs a firmware update? I'm on fence because of the price, and seeing it fail on stains & cords. It's not something I'd expect from a $1500 10th gen machine.
Neden türkçe ceviri yok. Keşke olsaydı :(
So why does this robot cost a lot of money?
If he doesn't know how to avoid the cable
And he doesn't know how to do a repeated wash if there are stains
best
11:20
lol il monte sur les cables son par choc touche 1000 fois les objets, sa brosse ne sort presque jamais, et dans les angle c’est aussi salle qu’avec un aspirateur à 200€ quel honte, il est vraiment nul ce robot aller chez dream