Ok. That was a british build, so they used some british tea sachets and all, but since tea was used as coolant, i would make it with lemon (still more sinfull i know, specially after a week or so) Also, i think the tea brew as in arabic coffee (with the tea ground left in the bottom) would serve a strong and bodied flavour to the ocasion, specially if it was south american black mate - just a personal preference: a strong 12h infused full bodied black mate brew with Lemon is AWESOME for cool at an almost 40C day like we are having here in the south of equator line now, so as for cold 10C nights in the winter to warm the throat!
Next video: "The exploit to get ad revenue from The exploit to get a well built PC". Following video: "The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get a well built PC" Following video: "The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get a well built PC" ...
@@David23666 I can already hear it "This right here is another viewer's BROKEN gaming pc and their reservoir isn't filled with water or coolant but with tea"
Kids still do it lmao, it's just tea bagging is so old someone who's a Dad also makes the same joke, it's just the way he told it made it FEEL like a Dad joke but make no mistake just think of the literal act of it xD it's not a Dad joke.
Here's a pro tip if you want to get rid of micro particles: use a sterile vacuum filtration unit. They are sold mainly for biology applications and will filter things down to 0.2um, which is more than enough for something like tea. It will also sterilize the fluid which is always a plus when trying to avoid things growing in your cooling loop.
Probably way cheaper and still get you close enough would be to use a fritted glass filter funnel, pull the tea through work a vacuum pump, then boil it to keep from having growth, or to stop the growth you'll often see like some % v/v acetonitrile in water used, but that would likely attack the consumer grade plastics in the loop, most plastics for use with organic solvents are like polypropylene or PTFE (teflon or polytetrafluoroethylene) and I don't think those are very common in transparent consumer grade products because they tend to be translucent at best
Yea, coffee filters isn't all that good at removing particulates. Good enough for coffee can still look cloudy A-F. I made a Christmas schnaps some years ago that got incredibly cloudy. Only thing I had was coffee filters and I must have ran that through the filters at least ten times before it started to look decently clear. After the first three times I thought there were no way it would work. But I got there eventually. Still it was far from optimal. The result however tasted just as intended. Won me a competition for the third year running, disqualifying me from competing again...
you could probably run the tea through 0.1 or 0.2 micrometer filter if you still wanna run tea as your fluid and make it less likely to clog the heat block fins
For future reference on drilling through ceramic for a nice clean hole, first drill a hole of required size into a piece of wood then tape this in place on your pot, fix the pot to a table pref using clamps and cloth/bubble wrap to get a firm grip without cracking the pot. Drill in using water (someone can just pour a jug slowly for you) start at a slow speed increasing pressure gently and power slowly until you feel the drill bit "grip" keep this same consistent pressure until through for a nice clean hole. I was a tiler for over 20 years so this is my contribution to PC building lol!
Sharkbite fittings have been a thing for so long in the plumbing industry I've always wondered why it had to be so much more complicated and expensive for the PC world
Just so you know, Yorkshire gold and Yorkshire Red (regular) are like night and day. Yes Yorkshire Gold is 3x the price but its almost impossible to go back to regular after tasting that blend. Its how they get you hooked.
I'm so happy for this, not only because I love the Spiffing Brit, but also because most channels of your calibre usually release dumb re-runs of their videos and compilations (on New Years eve). You made the Alpha move to share new content, very special as well, and for this I'm grateful, thank you LTT, happy new year everyone!!
@@royalknight8402 Even if this was filmed recently, it's normal to still have the Queen's portrait in use since the King probably hasn't sat for his Canadian portrait yet. He still has to approve his effigy for the new Canadian money, and heard on the news that probably won't happen until after his coronation next May, so we'll still be using things with the Queen's portrait for a while yet.
absolute brilliant idea. If for some reason you can resist the temptation of yorkshire tea and let it go cold, you can just pour it into the cooling system, play modded Skyrim for 6 second and it is boiling hot again
The inside of that cable panel is hilarious. The only thing more offensive you could have done is written a message about how coffee is superior to tea. That would _really_ annoy Spiff.
Overclockers UK just did a video on this pc and the mold it grew over time. Also the pc never worked after it was shipped due to shipping damage and mold. They also did the brown coolant
Now I got a maddening idea. You know when you're sitting with your desktop and drinking your tea/coffee and it slowly starts to get cold? How about a PC that uses watercooling to heat your mug or at least keep it warm? Should not be that complicated. A big piece of aluminium/copper with a water chamber inside that the water goes through before going to the fans.
That PC is fantastic! I love the attention to details throughout it with the fittings, the watermark panel, and actually having a teapot in it. It's awesome to see how much farther you can push the builds with so many people on staff even when they're not specifically on the project. Having a few of the other LTT staff add a bit of their time and experience with things like the painting, the etching, and the 3D modeling really brought it up another notch!
They should have put a heat exchanger into it for brewing tea, like an overcomplicated electric kettle, that would actually be useful and still be a total meme. Tea as coolant is going to have stuff growing in it and clog the microfins in the cooling blocks. Keep the cooling loop as a normal loop, but instead of a normal radiator, have it dump heat into a heat exchanger that heats water and drips the hot water into tea, maybe kinda like a drip coffee brewer. The harder you game, the faster it heats water to brew tea, and then you chug the tea for your caffeine fix so you can game even harder, repeat to infinity.
temperatures wise you need a smidge under boiling for brewing temp, not great for computers. But they could've put in a warming plate maybe? I just hope they swapped out the tea for brown dye.
They should build one for him, but load it with bloatware and other things to slow it down by a staggering amount so that he can fix it and get the traffic up to 90% It should also be in the shape of a round-about somehow.
this build ...I am Just amazed at this one. most people would of thought tea no problem and would of used food coloring to get the brown color but you guys thought of everything to do to make this work and to that my hat is off to you guys. Alex you are a genius that is all i can say. as always i loved this one one of the top 3 so far
I died at 20:50 xD Absolutely love the whole project and all the little touches you fit in. Sure the teapot is in the spotlight, but the painting, both sides of the cable panel, and obviously the tube fittings really top it up to perfection.
I'm not even Irish, but I see justice in this idea 😂 Although realistically, maybe go for something less extreme? Like wood finish PC case interior/exterior? Or maybe some sort of grass/clover closed (in glass) planter on top of PC case? Or even just plants in resin to keep case tidy.
At first I cringed when he put the tea through a coffee filter, but then I realized that it probably removes oils and stuff that stains. Also props for using yorkshire tea and pronouncing yorkshire correctly, very well researched video. Edit: 20:48 UNBELIEVABLY BASED
except for that tea is going to rot and clog up that loop. I have left tea in a bottle forgotten for a few days and it did not do well. And the temperature will just breed mold like crazy. It will basically be a kombucha PC.
I love how absolutely frantic Linus was in that first minute of intro. As if he's thinking, "I can't believe I'm about to do this shit please send help."
This could've been a lot more difficult in regards to the 3d modelling if the Spiffing Brit would've been a coffee drinker, but luckily he drinks tea and teapots happen to be one of the default 3d shapes in some 3d modelling software.
Pottery is the original 3d modeling medium after all and teapots have historically been a sort of proof or test of skill. There are several parts that all have to work together functionally and aesthetically; it has to pour cleanly and keep the lid from falling off while tipping over. body, spout, handle, and lid can give you a lot of different forms to work with
@@sil3nT. nah it’s just weird. I’m Irish from Ireland, I’ll never understand why North Americans of all people obsess over the historic atrocities of the Brit’s. Americans literally live on stolen Native American land and get p**sed whenever anyone brings up their countries historic atrocities
Not sure why people like spreading lies so much on the Internet. The Potato Famine was caused by a crop blight and an over reliance on potatoes in Ireland. Literally everyone in Europe suffered as a result of the blight, it's just Ireland was more reliant on potato than anywhere else. Royal Family had absolutely nothing to do with it, neither did most normal mainland British people (who were also suffering). Irish need to drop that chip on their shoulder and stop playing the victims. It's both boring and untrue.
@@MajorSkrewup Do ultrasonic cleaners not work on vaseline? I'd be shocked if they didn't have an ultrasonic big enough to dunk a motherboard, and as soon as he mentioned cleaning out the socket I assumed that's how they did it.
Haha, i was the same. I was like "Wait! Why the hell do you have a hand from IKEA? Who buys a hand from IKEA and why does IKEA even sell a hand? What is going on here?"
My wife is Cumbrian and I spent 8 years in the UK - when Linus mentioned doing this PC I told him there was one requirement we absolutely had to follow: Yorkshire Tea
As a BRIT who has been watching you for years now and thanks to you made the switch to PC gaming and do my own builds. i have to say. EPIC job guys, you even used my fave tea . Yorkshire tea., you just made this brit very proud. thumps up. Keep calm and carry on Linus
no you are mistaken. tea has the same properties of holy water therefore corrosion will not occur. this is due to the fact that the destruction of linus’ creation will be unholy
Linus's tea will corrode it. The Spiffing Brit's tea will flush all contaminated particles and kill any microbes that attempt to settle in the loop. He's Bri'ish, remember.
It really depends on the makeup of tea. I don't know enough about it to know how much of the colouring compounds come from water soluble chemicals contra suspended particles. If it's mostly suspended particles then you'll see a sedimentation process in zones of the loop with significant pressure drop (mostly the reservoir I'd guess?) and the colour will fade. Add to that potential microbacterial attack or off reactions between loop components and compounds in tea (I'd be afraid of the tannins personally). You might also see some permanent staining of the tubes from said tannins. If most of it is from water soluble compounds well it should? stay in there, maybe still staining the tubes. Even with my limited knowledge of chemistry this... well honestly seems like an out and out terrible idea x) but I think LTT knows that.
These custom build PCs are cherry on top! Love it together with crazy cooling ideas. Please guys, start making a playlist from these, sometimes it is hard to find "whole series"
Hahaha Alex is always creative. Mix that with his "eh, that's good enough" approach to builds always makes for far from perfect but interesting end results.
@Duality heh, I've tried finding it local I don't mail order tea no matter what. So, best I've done is green tea for myself but definitely wouldn't have the stones to use it as coolant.
@@whrench2676 I was in the US a few months ago and had to make tea in the microwave. It was that or... bleugh, using the coffee maker. The tea itself was questionable but passable.
2:26 "As for the other hole I'm just gonna apply a little bit of lube here" that was absolutely a moment that I had to double back and check what I was watching when I heard that
16:55 "well, here's where we find out if things are bad or catastrophic... Catastrophic." That had me cackling for a good minute, please make a short out of that
Can the lab PLEASE run a cheese spawning benchmark and include it in their analyses? I know it’s not a real metric but I laughed harder at “can’t even do 2,000 cheeses” than anything else this week 😂
"This paintjob is so sweet, and it only cost us the Irish viewers on this video." That line made me legitimately laugh out loud. And then the completely ignored explanation of the Irish Potato Famine on the back of the case was a total coup de grâce.
For finding leaks in your loops, would using a mineral oil burner be a good idea? It'll fill the tubes with smoke (at least in theory) so that wherever it leaks you'll see smoke coming out. I at least know this for use in automotive settings and whatnot.
I would guess that the smoke would leave grease and particulates in the loop which would be caught in the fins of the water blocks and eventually damage the components. Cars and other industrial pipes don't have those thinly spaced fragile fins, and are probably easiers to wash.
I'm not much of a PC builder, but do love a good rig. Couldn't you use a liquid that shows up under UV light to test for leaks? Not sure if it's a clever idea, or has been thought of before, but could help for detection of leaks
I am not sure how a liquid showing up under uv light would help because you want to find the leak before you add water into the system. If all else fails you just run liquid through it to find where it leaks from, after which the leak locations would be evident because liquid is coming out of it.
i love how linus didnt even know who the sponsor was and still gave a perfect pitch about the sponsor spontaneously. shows how long he's been doing this thing 😂
not sure if I could recommend those types of fitting for tubes, this type of fitting is quite frequently used in factory settings for pneumatic and hydraulic systems and the sharp points(teeth) over time (1-3 years) tend to eventually make their way through tubes cutting them off, and either destroying fitting or making repairs on them very painful in process, creating leakage, not to mention if they being used often for i.e. pipe maintenance they tend to loose they grip or one of the teeth gets broken etc. In factories these issues are usually overlook because you can just replace fitting (they aren't expensive) and cut damaged parts of tubes, even in case of "explosive disconnection" so it's very easy for maintenance over some other pernament options, now in pc I feel like this could turn costly very fast.
*hmmm yes perfectly balanced crimes against computing*
ratio+
How tf does this only have 8 likes
I only found this because I actively looked for jt
Vamos Argentina 🇦🇷
the fact linus didnt even notice this is so sad
hello
Linus walks into the project blind, questions everything and messes up the panel. Feels like a boss thing to do.
He also looks like he just woke up.
Then peels the clear protective film off, not cool
Bro is Linus stressed out he looked like he hasn't showered in days what happened
Could have been my ex-boss
@@riverstray831 sounded like he had just gotten over COVID or something
Best crossover in RUclips history. Perfectly balanced with no exploits.
As all things should be
yes
This is so Forking awesome
As all things should be
Damnit! I came here to make that joke 😅
I love how alex made sure the tea is good.
arguably the most important thing to get down in this entire build
Quality control.
Ok. That was a british build, so they used some british tea sachets and all, but since tea was used as coolant, i would make it with lemon (still more sinfull i know, specially after a week or so)
Also, i think the tea brew as in arabic coffee (with the tea ground left in the bottom) would serve a strong and bodied flavour to the ocasion, specially if it was south american black mate - just a personal preference: a strong 12h infused full bodied black mate brew with Lemon is AWESOME for cool at an almost 40C day like we are having here in the south of equator line now, so as for cold 10C nights in the winter to warm the throat!
The Spiffing Brit will now upload a video like "The Exploit To Get a Well Built PC" and it will just be your video of you building a PC for him
Next video: "The exploit to get ad revenue from The exploit to get a well built PC".
Following video: "The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get a well built PC"
Following video: "The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get ad revenue from The exploit to get a well built PC"
...
Shame his requirements mean it'll come with a sabotaged cooling system but maybe he can figure out how to change the fluid himself
@@davidy22 ....lol do you really think they shipping it to britain with coolant in it?
He's just going to rip this video and upload it himself
4090? Jesus.
This is an incredible build! I hope he enjoys the tea!
[w/only a few drops of additives] 😄
Someone is going to try doing this themselves and they'll send it to you for repairs lol
@@voldtitan1284 Fix or flop: tea pc
@@David23666 I can already hear it "This right here is another viewer's BROKEN gaming pc and their reservoir isn't filled with water or coolant but with tea"
Thanks for learning with us 🤣
And bits of Digestives
I have lived to see an actual teapot in a PC. With actual tea in the loop. And it turned out amazing, I love it.
what a time to be alive XD
wouldn't have tea left in the PC before it left dispatch if my father watches this, as he drinks tea 24/8!! xD
We are in the right timeline
Yorkshire is in England you Canadian twot.
I hoped the tea would actually be pouring in free air into a funnel....
I just witnessed the aging of our generation when Linus turned teabagging into an unforgivable dad-joke xD
19:52
fr
That ain't no dad joke bruh
it is now
Kids still do it lmao, it's just tea bagging is so old someone who's a Dad also makes the same joke, it's just the way he told it made it FEEL like a Dad joke but make no mistake just think of the literal act of it xD it's not a Dad joke.
Had to skip that part lol
Here's a pro tip if you want to get rid of micro particles: use a sterile vacuum filtration unit. They are sold mainly for biology applications and will filter things down to 0.2um, which is more than enough for something like tea. It will also sterilize the fluid which is always a plus when trying to avoid things growing in your cooling loop.
Probably way cheaper and still get you close enough would be to use a fritted glass filter funnel, pull the tea through work a vacuum pump, then boil it to keep from having growth, or to stop the growth you'll often see like some % v/v acetonitrile in water used, but that would likely attack the consumer grade plastics in the loop, most plastics for use with organic solvents are like polypropylene or PTFE (teflon or polytetrafluoroethylene) and I don't think those are very common in transparent consumer grade products because they tend to be translucent at best
That's the first thing I thought of too. Sterilize and remove particulate in one go.
what kinda shit can grow in cooling loops???????
My question is, can you use a defoaming agent in the tea as well, or will that attack the plastics?
Yea, coffee filters isn't all that good at removing particulates. Good enough for coffee can still look cloudy A-F. I made a Christmas schnaps some years ago that got incredibly cloudy. Only thing I had was coffee filters and I must have ran that through the filters at least ten times before it started to look decently clear. After the first three times I thought there were no way it would work. But I got there eventually. Still it was far from optimal. The result however tasted just as intended. Won me a competition for the third year running, disqualifying me from competing again...
you could probably run the tea through 0.1 or 0.2 micrometer filter if you still wanna run tea as your fluid and make it less likely to clog the heat block fins
well it wouldn't be tea anymore
Would that affect the color?
can also allow tea to sit for 48 hours and decant the liquid off the top.
run it a few times through a Brita water filter
@shak1ification that just ruins it
“And all it cost us is the Irish viewers on this video” got me laughing
And the message on the panel at 20:50... lol
I was literally thinking "gross, the union jack" right before he said it lmfao
@@Chraae Don't say that.
@@Chraae how is the union jack gross?
@@DoubleAAce I know a few people who refuse to call it anything but a “butcher’s apron”
For future reference on drilling through ceramic for a nice clean hole, first drill a hole of required size into a piece of wood then tape this in place on your pot, fix the pot to a table pref using clamps and cloth/bubble wrap to get a firm grip without cracking the pot. Drill in using water (someone can just pour a jug slowly for you) start at a slow speed increasing pressure gently and power slowly until you feel the drill bit "grip" keep this same consistent pressure until through for a nice clean hole. I was a tiler for over 20 years so this is my contribution to PC building lol!
This is just generally useful, I bet I'll come across some scenario one day where I'll need to drill through ceramic and this will help. Thanks!
@@eggnorman bongs.
@@notinterested8452 i like you
So he's finally exploited his way to an LTT video... with the power of SPIFF
Spiffing hell
No. With the power of Yorkshire tea
Which is basically spiffed up leaves 😁
The power of Yorkshire tea you mean
Spiff would absolutely not care if the PC actually works as long as it had tea. Its all about committing to the bit, and good on you doing it!
Committing to the Brit
what is a spiff?
@@ganeshaloney3882 spiff is short for the spiffing brit, the youtuber to whom this computer was designed for
I have an image of a FedEx truck floating in the middle of the Atlantic now. Thanks, Alex
The moment I read this comment was the moment Alex said it lol.
So basically….
The British are making the Canadians do their work……
HMMMM
@@worldofjoseup noo in exchange we get to have royal family visits! That we pay for... wait a second
@@nster3 lmfao that is genius
@@nster3 i didn’t even mean to comment on this lol
Sharkbite fittings have been a thing for so long in the plumbing industry I've always wondered why it had to be so much more complicated and expensive for the PC world
Because gamers don't know better and pay extra
Just so you know, Yorkshire gold and Yorkshire Red (regular) are like night and day. Yes Yorkshire Gold is 3x the price but its almost impossible to go back to regular after tasting that blend. Its how they get you hooked.
Forgot Yorkshire Red existed! Floor sweepings.
QFT (can't believe they didn't put the Gold box in )
Yorkshire Gold is the only sort I buy from them.
M&S Gold is my favourite, you can't beat it.
I only drink the decaffeinated now.
I'm so happy for this, not only because I love the Spiffing Brit, but also because most channels of your calibre usually release dumb re-runs of their videos and compilations (on New Years eve). You made the Alpha move to share new content, very special as well, and for this I'm grateful, thank you LTT, happy new year everyone!!
New to us but considering the Queen Elizabeth picture this was made quite a while ago
@@JanPeterDeVries this quiet new 6:08 shows winter time the motherboard use for this bulid from last week
@@royalknight8402 That video was probably shot a while back as well.
@@royalknight8402 Even if this was filmed recently, it's normal to still have the Queen's portrait in use since the King probably hasn't sat for his Canadian portrait yet. He still has to approve his effigy for the new Canadian money, and heard on the news that probably won't happen until after his coronation next May, so we'll still be using things with the Queen's portrait for a while yet.
The problem is a compatibility issue with this computer and skyrim.
This computer expects 1000 crackers after the cheese
This PC should be powered by fish and chips.
Based
This video would hit different if Linus managed to actually get it sponsored by Yorkshire Tea. I love this crossover
Spiff will get the reveal exploit video sponsored by them.
@@ThePopeofPoland1 Has he ever actually been sponsored by them? I thought it was just a bit.
Yorkshire Tea? Gimme PG Tips or give me DEATH!!
I don't understand how Spif isn't sponsored by them.
@@ChristopherHallett Cornish tea's where it's at.
Linus was afraid to be replaced by an AI.
but instead he got replaced by Alex, The hipster Linus
And taller linus too
He does look eerily like Linus's brother or something
Linus 2.0
Music
Linus: Supernova
Alex: Crabrave
Games
Linus: Shadow of the Tomb Raider
Alex: Valheim
The choice is obvious!
Linus 6.0
absolute brilliant idea. If for some reason you can resist the temptation of yorkshire tea and let it go cold, you can just pour it into the cooling system, play modded Skyrim for 6 second and it is boiling hot again
Just play crisis
@@theyogurtfan5847overheat crisis
@@gozutheDJ true
😂
@@gozutheDJ And also way past the point where the original Crysis is even remotely taxing on gaming hardware.
If Alex walks into your room with a smile on his face, you know it's bout to go down
"why dont we just dye the water brown?" "THATS WHAT THE TEA IS FOR LINUS!!!"
The irony is - Overclockers UK (a UK pc parts company) had to rebuild it on their channel as the tea got mouldy.
Alex is officially the jankiest man alive. Use a problematic part and then use an anti problematic part to solve it. Hope it works
hahaha y
he knows enough to be dangerous
The inside of that cable panel is hilarious. The only thing more offensive you could have done is written a message about how coffee is superior to tea. That would _really_ annoy Spiff.
Yes
I would write it inside the case *_underneath_* the motherboard.
It's not offensive, it's just the actual truth
@@kevinwells9751 tea btfo
@@kevinwells9751 don't let Spiff hear you say that, he'll find a way to exploit bugs in your life
Overclockers UK just did a video on this pc and the mold it grew over time. Also the pc never worked after it was shipped due to shipping damage and mold. They also did the brown coolant
It didn't cost you this Irish viewer. Great job. Love these 'mad' cooling PC video's you guys do. (Props for the inside back panel.)
Spiff's brand of being a "Spiffing Brit" is quite self aware so he's not going to annoy too many people if it's him with that paint job.
Nor this Irish viewer😂😂😂😂
@@richardmcdonnell5367 there are dozens of us
he probably gained a few with the inside of the case panel aswell xD
@@FPSNecromancerBob The fact that a flag of any nation would annoy anyone is just sad, people really need to chill the fuck out these days.
Vortex Flow of a liquid can be used to separate particulate, but the coffee filter is easier.
sometimes Occam was right
"All it cost us was our Irish viewers" LOL! Good one!
And about a 3rd of the world they also colonised
And then when they pull the back panel off it has an Irish flag and says england caused the potato famine 😂😂😂😂😂
What a lad for that quip
Did you catch the Ireland flag and jab on the inside of the back panel? 20:50
@@haddib NA doesn't give a fk about the the 3rd world 😂
Now I got a maddening idea.
You know when you're sitting with your desktop and drinking your tea/coffee and it slowly starts to get cold? How about a PC that uses watercooling to heat your mug or at least keep it warm? Should not be that complicated. A big piece of aluminium/copper with a water chamber inside that the water goes through before going to the fans.
Sit your cup directly on the radiator...
That PC is fantastic! I love the attention to details throughout it with the fittings, the watermark panel, and actually having a teapot in it.
It's awesome to see how much farther you can push the builds with so many people on staff even when they're not specifically on the project. Having a few of the other LTT staff add a bit of their time and experience with things like the painting, the etching, and the 3D modeling really brought it up another notch!
They should have put a heat exchanger into it for brewing tea, like an overcomplicated electric kettle, that would actually be useful and still be a total meme. Tea as coolant is going to have stuff growing in it and clog the microfins in the cooling blocks.
Keep the cooling loop as a normal loop, but instead of a normal radiator, have it dump heat into a heat exchanger that heats water and drips the hot water into tea, maybe kinda like a drip coffee brewer.
The harder you game, the faster it heats water to brew tea, and then you chug the tea for your caffeine fix so you can game even harder, repeat to infinity.
this needs to be higher
temperatures wise you need a smidge under boiling for brewing temp, not great for computers. But they could've put in a warming plate maybe?
I just hope they swapped out the tea for brown dye.
I like the idea of using the cpu/gpu heat to actually brew tea
Someone suggested a proper filtering system would leave no particulate but still tea coloring
Biffa is going to be so jealous of the Spiffing Brit getting a tea related PC.
Who’s gonna spill the tea to him?
I hope Biffa mentions it soon
Came here to comment this lol
A TEArrific trageTEA??
They should build one for him, but load it with bloatware and other things to slow it down by a staggering amount so that he can fix it and get the traffic up to 90%
It should also be in the shape of a round-about somehow.
this build ...I am Just amazed at this one. most people would of thought tea no problem and would of used food coloring to get the brown color but you guys thought of everything to do to make this work and to that my hat is off to you guys. Alex you are a genius that is all i can say. as always i loved this one one of the top 3 so far
Love Alex's shop safety, the hoodie strings tucked in are top tier.
I died at 20:50 xD Absolutely love the whole project and all the little touches you fit in. Sure the teapot is in the spotlight, but the painting, both sides of the cable panel, and obviously the tube fittings really top it up to perfection.
What does it say?
@@Hoaxe72 they show it later at 22:13
Nothing says truely British more than farming out the product to a Canadian company. Bravo Spiff on getting Linus' crew to do all the work.
what do you think our glorious Commonwealth is for?
“Who would have thought reading the directions and having the right tools would make it so easy” 😂
Equipping the dapper exploiter himself with a *tea cooled pc?!* Oh yeah, this is the perfect video to be sponsored by those mad lads at Seasonic
Seasonic? More like TEAsonic....
I'll see myself out.
@@Adlata wow that is alot of reaching over a seasonic joke
*Madrinas sponsor spot of yesteryears looking nervously in the background*
@@Adlata I really really hope linus sees this and tells you how dumb you are in the next Wan show.
Should be teasonic or noone
"All it cost us was Irish viewers on this video" 😂🍀
As a redemption we want to see you make a PC for Jacksepticeye ☘️
cooled by Jameson or Guinness?
Top of the mornin coffee ya nobb head!
I'm not even Irish, but I see justice in this idea 😂
Although realistically, maybe go for something less extreme? Like wood finish PC case interior/exterior? Or maybe some sort of grass/clover closed (in glass) planter on top of PC case? Or even just plants in resin to keep case tidy.
what would cool it?
@@quickhakker Forget cooling, use potato batteries as a power source
I just love how *genuine* Seasonics support is from a Sponsor perspective they just seem like amazing people to work with.
They literally just sponsor a video once a year where the only talking point is "Merry Christmas from Seasonic".
As a Brit this is so funny. Also Alex’s understanding of UK-Ireland relationships over the years is quite hilarious.
I know!! Imagine if it was a video about the North American invaders displacing the indigenous population! :O I loved the video also :)
Aye. It's 2023 and North Americans are still blundering into the subject with as much nuance as ever.
@@waynestorton1875 Not even just displacing them, but literal outright genocide.
well canada has a decent irish population but even without it its pretty common knowledge that we didnt get along
@@waynestorton1875 wdym?
At first I cringed when he put the tea through a coffee filter, but then I realized that it probably removes oils and stuff that stains. Also props for using yorkshire tea and pronouncing yorkshire correctly, very well researched video.
Edit: 20:48 UNBELIEVABLY BASED
it was the irish that caused had. had they not been so crass and abrasive, no action would have been required
@@Sillimant_ hello poopskull
@@Sillimant_are you trying to justigy colonization?
Incredibly based indeed 😂
@@Sillimant_ sounds like "She forced my hand to hit her. If she hadn't been so sassy and disobedient, no action would have been required"... 💀
This build is perfectly balanced, as it should be. TheSpiffingBrit should love this build, and can rest easy knowing that it is.
except for that tea is going to rot and clog up that loop. I have left tea in a bottle forgotten for a few days and it did not do well. And the temperature will just breed mold like crazy. It will basically be a kombucha PC.
@@scottcol23 well theyre gonna have to get rid of the tea to ship it to him so im sure Spiff will just fill it up with water
As a British pc enthusiast, I approve. Edit: Made this comment at the beginning of the video, but I'm not happy. Needs more tea.
Even of the inner back decoration?
Just remember, always defend your tea supply, if you have guns and are denied tea... You are one way converted into an American! :D
It also needs a dunking port...
Also the Kings portrait
And where is the milk?
You guys are essentially just pimp my ride for computers now and it's great.
hold that call, checked gamersnexus trivium build yet?
I love how absolutely frantic Linus was in that first minute of intro.
As if he's thinking, "I can't believe I'm about to do this shit please send help."
This could've been a lot more difficult in regards to the 3d modelling if the Spiffing Brit would've been a coffee drinker, but luckily he drinks tea and teapots happen to be one of the default 3d shapes in some 3d modelling software.
There's a reason that it's everywhere: that teapot was in fact the first object ever modeled in 3d
@@Jake9066 we know
The Utah teapot is quite different from the one they used
@@TheBlazingRiver I didn't know that tbh
Pottery is the original 3d modeling medium after all and teapots have historically been a sort of proof or test of skill. There are several parts that all have to work together functionally and aesthetically; it has to pour cleanly and keep the lid from falling off while tipping over. body, spout, handle, and lid can give you a lot of different forms to work with
Happy New Year to Linus and the entire crew!
You earned it Spiff
27:10 brilliant choice of music
That Irish message on the inside of the case lmao
Tiocfaidh ár lá!
Having a referance to the British empire causing mass genocide is the most Spiffing think they did lol.
Happy for you~
@@sil3nT. nah it’s just weird. I’m Irish from Ireland, I’ll never understand why North Americans of all people obsess over the historic atrocities of the Brit’s. Americans literally live on stolen Native American land and get p**sed whenever anyone brings up their countries historic atrocities
Not sure why people like spreading lies so much on the Internet.
The Potato Famine was caused by a crop blight and an over reliance on potatoes in Ireland. Literally everyone in Europe suffered as a result of the blight, it's just Ireland was more reliant on potato than anywhere else.
Royal Family had absolutely nothing to do with it, neither did most normal mainland British people (who were also suffering).
Irish need to drop that chip on their shoulder and stop playing the victims. It's both boring and untrue.
Conceptually I didn't think this was going to be such a beautiful computer but now I want it!
The line starts on the left side of the road.
A build that would bring a tear to the eye of even the most rugged, most handsome, most powerful man alive, Reanu Keeves.
Ah yes, Reanu Keeves Wholesome Chungus 100
16:56 You couldn't make that up if you tried. Glad you got it on camera!
Now this is the kind of collab that makes me happy! Two great channels with real personality behind the ideas! Loved this
the laborer who picked the tea in a third world commonwealth part of Brita9in also contributed, slightly.
I love how he just casually says "I have this hand from IKEA"
at least the hand wasn't covered in Vaseline like the mobo
@@MajorSkrewup Do ultrasonic cleaners not work on vaseline? I'd be shocked if they didn't have an ultrasonic big enough to dunk a motherboard, and as soon as he mentioned cleaning out the socket I assumed that's how they did it.
@@guspaz I wouldn't know, I thought the best way to clean off Vaseline was with a hotel bed sheet
Gave me NileGreen Vibes XD
Haha, i was the same. I was like "Wait! Why the hell do you have a hand from IKEA? Who buys a hand from IKEA and why does IKEA even sell a hand? What is going on here?"
Massive respect to the person who designed the back plate… my fav part of the whole pc
That was incredible. Makes the entire video
The royal family is responsible for the potato famine 😂
There's some joke in here about England and Ireland and "perfectly balanced with no exploitation".....
A coloniser would say that, very true
“According to the instructions” - Where in the world are you finding these instructions on how to cool a PC using tea.
As someone who lives in the town Taylor's (Yorkshire Tea) is from, thanks for being the first non UK channel to pronounce Yorkshire correctly
My wife is Cumbrian and I spent 8 years in the UK - when Linus mentioned doing this PC I told him there was one requirement we absolutely had to follow:
Yorkshire Tea
Me too, no way
Love how easy Linus remembered the Seasonic sponsorship bit the second Alex triggered it by saying the brand's name - That's true love hahaha
Happy New Year, LTT! I've heard about the tea-cooled PC through WAN Show; Excellent work, Alex! It was worth the hype.
As a BRIT who has been watching you for years now and thanks to you made the switch to PC gaming and do my own builds. i have to say. EPIC job guys, you even used my fave tea . Yorkshire tea., you just made this brit very proud. thumps up. Keep calm and carry on Linus
Yorkshire Tea is also seen in videos by Colin Furze.
the tea is going to cause so much corrosion I love it.
no you are mistaken. tea has the same properties of holy water therefore corrosion will not occur. this is due to the fact that the destruction of linus’ creation will be unholy
Yeah it's going to stain the shit out of everything too lol
Like the slow corrosion of the British Empire.
I jest, I love my cousins across the pond
Linus's tea will corrode it. The Spiffing Brit's tea will flush all contaminated particles and kill any microbes that attempt to settle in the loop. He's Bri'ish, remember.
It will match the teeth of the British
So what will happen after a while? Would the water loop need to be filled with tea packets again to re-up the flavor?
The PC will know the difference between tea and water
@user-ui9ni4nf5z i clicked that and now i'm gay, thanks a lot
Just keep dumping tea leaves in and called it steeped.
@@tatzecom clearly using PG tips if it rots.
It really depends on the makeup of tea. I don't know enough about it to know how much of the colouring compounds come from water soluble chemicals contra suspended particles. If it's mostly suspended particles then you'll see a sedimentation process in zones of the loop with significant pressure drop (mostly the reservoir I'd guess?) and the colour will fade. Add to that potential microbacterial attack or off reactions between loop components and compounds in tea (I'd be afraid of the tannins personally). You might also see some permanent staining of the tubes from said tannins.
If most of it is from water soluble compounds well it should? stay in there, maybe still staining the tubes.
Even with my limited knowledge of chemistry this... well honestly seems like an out and out terrible idea x) but I think LTT knows that.
13:50 Even the BIOS battery has British colors painted onto it. That's attention to detail.
I thought that was just a reflection of the paint on the inside of the case?
"Oi mate, may you send me that wonderful piece of tech, including the tea, of course"
These custom build PCs are cherry on top! Love it together with crazy cooling ideas. Please guys, start making a playlist from these, sometimes it is hard to find "whole series"
Hahaha Alex is always creative. Mix that with his "eh, that's good enough" approach to builds always makes for far from perfect but interesting end results.
Should've taken the bottom out of the teapot or cut in half to put the pump in it.
I cannot wait for Spiff's response
I live in Derbyshire and we all enjoy Yorkshire tea here and I was proud to see it displayed in this video! Marvellous choice!
I would like to see the Skyrim Cheese Wheel test become part of the standard LTT benchmarking test suite.
14:10 if you listen carefully, you may hear TheSpiffingBrit already writing down a bounty on Plouffe's head after saying green tea through it.
Tea is tea green or otherwise haven't had spiffs brand can't seem to find it.
@@Nakasasamar/confidentlyincorrect
@Duality heh, I've tried finding it local I don't mail order tea no matter what. So, best I've done is green tea for myself but definitely wouldn't have the stones to use it as coolant.
@19:28 is when i learned The Spiffing Brit's name is "Tom".
It’s funny to me that spiff got a collab like this and no one else in the yogscast did
i did not realise that he was in the yogscast
Might it have something to do with viewership?
Born too late to explore the world, too early to explore the universe, but just in time to witness tea cooled PC with a tea pot. Incredible
Less than a minute and already scarred by how Linus made tea
He filtered it, that's class
Well at least linus used a kettle and not a microwave
@@whrench2676 I was in the US a few months ago and had to make tea in the microwave. It was that or... bleugh, using the coffee maker. The tea itself was questionable but passable.
@@Logarithm906 TEA IS GROSS
@@warhokn4178 Tea is fine, it's about how it's made
Lol. This PC was forged in fire. Perfect dragon proofing.
2:26 "As for the other hole I'm just gonna apply a little bit of lube here" that was absolutely a moment that I had to double back and check what I was watching when I heard that
16:55 "well, here's where we find out if things are bad or catastrophic... Catastrophic." That had me cackling for a good minute, please make a short out of that
Can the lab PLEASE run a cheese spawning benchmark and include it in their analyses? I know it’s not a real metric but I laughed harder at “can’t even do 2,000 cheeses” than anything else this week 😂
Obviously it had to be Yorkshire Tea. Everything else would be denied by Spiff.
But honestly, you should have sent him a coffee cooled PC. :D
The Royal Post refuses to deliver anything to the Spiffing Brit that smells remotely of coffee beans, by decree of the monarch.
The queen would probably come back to life and try to reclaim Canada if they did.
They used regular and not gold despite having it.
4:17 Man held the cup itself instead of holding it by the handle
"This paintjob is so sweet, and it only cost us the Irish viewers on this video."
That line made me legitimately laugh out loud. And then the completely ignored explanation of the Irish Potato Famine on the back of the case was a total coup de grâce.
Which is stupid so we did it....
LTT's New Years resolution
5:40 - "and all it cost us was the irish viewers on this video"
Don't forget the Scottish lol
I’m Scottish but mate the majority of the British flag is the Scottish one so I’m happy with the flag, not the country though 😂
For finding leaks in your loops, would using a mineral oil burner be a good idea? It'll fill the tubes with smoke (at least in theory) so that wherever it leaks you'll see smoke coming out. I at least know this for use in automotive settings and whatnot.
I would guess that the smoke would leave grease and particulates in the loop which would be caught in the fins of the water blocks and eventually damage the components. Cars and other industrial pipes don't have those thinly spaced fragile fins, and are probably easiers to wash.
Nick is the goat for all this painting and patterns. It’s truly unmatched and I’m not even British.
It would complete the build if this PC came with a background web server that only output HTTP code 418.
22:22 well the brits sure did
I'm not much of a PC builder, but do love a good rig. Couldn't you use a liquid that shows up under UV light to test for leaks? Not sure if it's a clever idea, or has been thought of before, but could help for detection of leaks
I am not sure how a liquid showing up under uv light would help because you want to find the leak before you add water into the system. If all else fails you just run liquid through it to find where it leaks from, after which the leak locations would be evident because liquid is coming out of it.
i love how linus didnt even know who the sponsor was and still gave a perfect pitch about the sponsor spontaneously. shows how long he's been doing this thing 😂
Love the sly reveal of the "British landlords and the royal family are responsible for the potato famine" on the panel interior 😂
Love to see it
This gotta be one of the most entertaining videos I have ever seen
Just because it's chaotic
I feel spiff watched the video and noted eveything."potatoe famine you say? Time to exploit your entire existence."
'British landlords a d the Royal family are responsible for the potato famine'
god I love this channel 😂 @20:50
5:34 That gave this Irish viewer a chuckle and OMG at 22:11 🤣 Love it.
This build is absolutely flawless and with zero exploits.
I loved reading that in the Spiffing Brit’s voice.
not sure if I could recommend those types of fitting for tubes, this type of fitting is quite frequently used in factory settings for pneumatic and hydraulic systems and the sharp points(teeth) over time (1-3 years) tend to eventually make their way through tubes cutting them off, and either destroying fitting or making repairs on them very painful in process, creating leakage, not to mention if they being used often for i.e. pipe maintenance they tend to loose they grip or one of the teeth gets broken etc. In factories these issues are usually overlook because you can just replace fitting (they aren't expensive) and cut damaged parts of tubes, even in case of "explosive disconnection" so it's very easy for maintenance over some other pernament options, now in pc I feel like this could turn costly very fast.