Hi ladiesandtech, i have a compactlogix and need to replace the sd memory card. i cannot seem to do this easily, and i do not want to force the card out in case i break something and i end up with more problems than i began with. Can you please advise how i should do this? is there a button that i need to press in order for the card to eject? Or do i use a pair of pliers and pull it out while pushing the lock/hold flap to the side? Any advice would be appreciated. Thank you.
If we change the card with the same model/part number, but with a different firmware version. Will we need to update something via the programming software or it will work just as plug-and-play?
Mohamed Riyas it depends. if you are replacing with the same card then no. if you get a different card with different configuration of inputs and output then yes because the addresses will change.
Great video and thank you very much for making it but I can barely hear you You'll have to speak up a little more I'm a little different this eat 😂😂😂😂😂
Thanks for posting this! I couldn't figure out for the life of me how to get these out and was afraid of breaking it....
Great video. Well explained. Thanks.
It was useful, thanks from Brazil :)
How to programme digital input and analogue input in Allen bradly please
Hi ladiesandtech, i have a compactlogix and need to replace the sd memory card. i cannot seem to do this easily, and i do not want to force the card out in case i break something and i end up with more problems than i began with. Can you please advise how i should do this? is there a button that i need to press in order for the card to eject? Or do i use a pair of pliers and pull it out while pushing the lock/hold flap to the side? Any advice would be appreciated. Thank you.
Did you get it?
If we change the card with the same model/part number, but with a different firmware version.
Will we need to update something via the programming software or it will work just as plug-and-play?
Was the power off on it
Please share video on Temperature display in compaxtlogix using rtd module IR6
Excellent job!!
Thank you !!!
Thanks for The vídeo
when we change the card,is it necessary to change the the program too?
Mohamed Riyas it depends. if you are replacing with the same card then no. if you get a different card with different configuration of inputs and output then yes because the addresses will change.
Hi, how are you? I have some cards of4 and if4 defective ha how to repair with soft????
thank you fro the video
Jika mengganti card modul IO seperti ini .. Apakah diperlukan setting software ...? Mohon jawaban
Thank you
You're welcome
😊 👍
Great video and thank you very much for making it but I can barely hear you
You'll have to speak up a little more I'm a little different this eat 😂😂😂😂😂
Not a relay output card