Been using autocad to do all the deatailing. This one seem to be the right one for producing working drawings in a shortest time possible. This is well presented. Am subscribing rightaway👍
Thank you so much for these videos. I have been trying to find revit structure videos to help my structural drawings be more professional and precise. God Bless you bro and keep it up.
You are very informative and clear in your explanations. I am glad I came across your content, the best by far. May you please do a video detailing a slab using SANS CODES and demonstrate how you do Alternate Bars Reversed(ABR) and Alternate Bars(Alt). God Bless.
Hello, if we have several floors when rebar detailing, should we difference the rebar size for each column, beam, and slab on each floor? Especially when we want to make automatic bill of quantity from Revit.
I mean that if we want to make rebar schedulling, should we define rebar size for each column, beam, and slab on each floor?(i.e 19mm column A lvl 1, 19mm column B lvl 1, 19 mm column C lvl 2, 19 mm beam A lvl 1, 19 mm beam B lvl 1, etc) , in this video ( see 6:27 and 12:17) you were using Y12 for both column and footing. When we want to know the quantity of rebar, how revit can difference the rebar for columns and footing?
@@fillbertnjoko7875 oh I understand now. You assign rebar to partitions. For example B1, B2, C1, Base 1 etc... These will be recognized in the schedule.
Good day, Skillmax Academy Please, which of your videos can you recommend I watch to learn how to set Bar Mark alone when tagging on the column rebar section as seen in 28:00 of this particular video. Thank you in anticipation
This video tutorial was clearly demonstrated but how can I get and attach to the Revit the rebar images of the foundation structures since the one in my family look unusable
Thank you for a great video, very easy to understand. I was wondering though, why do you model your columns as individual elements from level to level instead of a single column from footing to the highest level ?
You can do that. But you may wish to know that columns. Are constructed from level to level, another reason is that I use robot structural analysis which requires splitting at levels
Hello, I found your video very informative, but I'm curious. Where I live, we use AUTOCAD for detailing the rebar in concrete structural elements. I'm wondering, is this progam efficient enough to suffice a change? And also, where can one find rebar libraries?
hi skillmax, how can i 1) add a footer on a bending schedule, 2) add separate partitions/members on one bending schedule, 3) split a bending schedule to fit on a singe sheet eg A4, 4) make a created bending schedule with header and footer, a default one? Thank you.
Hi thanks for watching. template is premium content.You get it in any revit structure course. If you are not able to get Revit structure course i will try to create a lesson here on how you can create your template in future.
My Rebar says H12, or 12M not Y12 or R yet I am using the BS/GBR standard template..did you edit the name or Y and R is just the default of your template
@@skillmaxacademy A cantilever steel Universal Beam is supported by Concrete Beam. That same steel Universal Beam is supporting Steel Rectangular Hollow sections side by side. How then do we connect 1) steel UB to concrete? and 2) Steel Rectangular Hollow Sections to the cantilever steel UB?
Sir can i please know if there is way one can take online classes at the end you of the college give a certificate to the individual . I am a civil engineer but the archetecture is the work i have being doing through out the seven year and want to get a certificate i am also thinking doing road design either using Civil 3d or Revit thanks Patrick
Hey guys, what strategies are you using to replicate rebar modeling across columns that are the same type? using assemblies? Copy and paste? If a type of column changes the rebar, I have to manually track all columns and change it? For a small project, this is feaseable, but not large projects.
Hi Maurice, this is the message is get when i try to purchase your course "Service Unavailable Sorry, this service is not available in your region." Can we do Western Union?
Learn more from courses here:
www.skillmaxcad.com/
I need
Am bless to have you here
Looking forward to learn from you
You are truly a God-sent teacher. Thank you
You are welcome. Continue learning on this channel and let others know about it
You know bro...much appreciation Loking forward to take a full course on revit structure
Great to hear thanks
Been using autocad to do all the deatailing. This one seem to be the right one for producing working drawings in a shortest time possible.
This is well presented. Am subscribing rightaway👍
Am happy you like it. Keep watching
you really are a blessing in disguise :)
Thank you so much for these videos. I have been trying to find revit structure videos to help my structural drawings be more professional and precise. God Bless you bro and keep it up.
You are welcome and don't forget to share with others
Nice to be on your platform
Awesome teaching
Thank you share with friends
GOOD POTENTIAL
I glad you are back.
Sure. Keep watching.
Sure. Keep watching.
Great tutorial 🎉
Could you highlight on how to create or edit the rebar tags.
Your suggestion is well noted for the future. In the meatime the paid courses cover custom rebar anotation in detail.
You are very informative and clear in your explanations. I am glad I came across your content, the best by far.
May you please do a video detailing a slab using SANS CODES and demonstrate how you do Alternate Bars Reversed(ABR) and Alternate Bars(Alt).
God Bless.
Hello, if we have several floors when rebar detailing, should we difference the rebar size for each column, beam, and slab on each floor? Especially when we want to make automatic bill of quantity from Revit.
Hi. Not sure if I got your question right. Size of rebar will depend on structural analysis considering expected loads.
I mean that if we want to make rebar schedulling, should we define rebar size for each column, beam, and slab on each floor?(i.e 19mm column A lvl 1, 19mm column B lvl 1, 19 mm column C lvl 2, 19 mm beam A lvl 1, 19 mm beam B lvl 1, etc) ,
in this video ( see 6:27 and 12:17) you were using Y12 for both column and footing. When we want to know the quantity of rebar, how revit can difference the rebar for columns and footing?
@@fillbertnjoko7875 oh I understand now. You assign rebar to partitions. For example B1, B2, C1, Base 1 etc... These will be recognized in the schedule.
@@skillmaxacademy, oh I see, you help me a lot! Thank you
Good day, Skillmax Academy
Please, which of your videos can you recommend I watch to learn how to set Bar Mark alone when tagging on the column rebar section as seen in 28:00 of this particular video.
Thank you in anticipation
This video tutorial was clearly demonstrated but how can I get and attach to the Revit the rebar images of the foundation structures since the one in my family look unusable
Thank you for a great video, very easy to understand.
I was wondering though, why do you model your columns as individual elements from level to level instead of a single column from footing to the highest level ?
You can do that. But you may wish to know that columns. Are constructed from level to level, another reason is that I use robot structural analysis which requires splitting at levels
Hello, I found your video very informative, but I'm curious. Where I live, we use AUTOCAD for detailing the rebar in concrete structural elements. I'm wondering, is this progam efficient enough to suffice a change? And also, where can one find rebar libraries?
Revit is capable and it's the future coz it's a BIM software. Don't be left behind. Start learning now and transition gradually.
Nice 🙂
We just need to learn a bit more on the bar bending schedule so we can move over
Nice job. Do you have a video on project report and bar bending schedule?
Check on channel on bar bending schedule
hi skillmax, how can i 1) add a footer on a bending schedule, 2) add separate partitions/members on one bending schedule, 3) split a bending schedule to fit on a singe sheet eg A4, 4) make a created bending schedule with header and footer, a default one? Thank you.
perfect
Good to hear that
Welcome back. Thank you for this wonderful tutorial. Please can you kindly send me your revit structural template
Hi thanks for watching. template is premium content.You get it in any revit structure course. If you are not able to get Revit structure course i will try to create a lesson here on how you can create your template in future.
@@skillmaxacademy I'm looking forward to a tutorial on the template.
My Rebar says H12, or 12M not Y12 or R yet I am using the BS/GBR standard template..did you edit the name or Y and R is just the default of your template
You can edit name or use south african template
Thank you
Please tell me how to propagate steel reinforcement in column.....
hi skillmax. How can a cantilever UB to the Concrete Beam? This cantilever UB is caring 2 RHS side by side, how do i connect these 2 RHS to the UB?
It's all concrete this is just section in 3D..maybe I missed your question?
@@skillmaxacademy A cantilever steel Universal Beam is supported by Concrete Beam. That same steel Universal Beam is supporting Steel Rectangular Hollow sections side by side.
How then do we connect 1) steel UB to concrete?
and 2) Steel Rectangular Hollow Sections to the cantilever steel UB?
We need a tutorial on how you made that rebar tag according to British code
Please, any video on this request?
Can we use rebar extension plug in for automatic reinforcement
Yes you can use an extension for example naviate rebar extension. Check video on channel
Sir can i please know if there is way one can take online classes at the end you of the college give a certificate to the individual . I am a civil engineer but the archetecture is the work i have being doing through out the seven year and want to get a certificate i am also thinking doing road design either using Civil 3d or Revit
thanks
Patrick
Pliz do a course on complete detailing of RCC building (shop drawings) using revit structure
Thank you for the suggestion. It's in my plan.
@@skillmaxacademy pliz do I will definitely buy the course
@@skillmaxacademy plea do I really need to stop using AutoCAD
@@civilgeek2567 do it gradually. autocad is still needed but BIM software like revit is the future.
Hey guys, what strategies are you using to replicate rebar modeling across columns that are the same type? using assemblies? Copy and paste? If a type of column changes the rebar, I have to manually track all columns and change it? For a small project, this is feaseable, but not large projects.
How do I detail curved beams in Revit
please share structural template sir, with live building please🙏
Hi Maurice, this is the message is get when i try to purchase your course "Service Unavailable
Sorry, this service is not available in your region."
Can we do Western Union?
Try to open link on mobile phone.. It should open. If not email me on skillmaxacademy@gmail.com. Com. Can do western union.
Skillmaxacademy@gmail.com
I can't annotate the column and i am using the south african bar shape.
Pls. Clarify sir, thank you .
Can't understand.. What is message when you try to anotate?
@@skillmaxacademy
It's saying like there is no tag loaded for structural rebar.
@@bashiralasmohamed8724 load tag from library your South African library... Make sure it's installed
Can I have your template please
I need my styal detail in video
You mean stair detail? Check the videos on channel
😝 promosm