Hi Kevin - this is my next job on my 2007 Golf Plus 1.9 TDI. The DMF rattle spells the need for a new flywheel and clutch. Thank you so much for videoing the process from start to finish. Leaving in all the little steps rather than editing some out will save me a lot of time. Best wishes for the future 😃😃
Ive watched a few of your videos, and im certainly impressed with the Zip & Zest that you attack these Jobs with, lets be honest the conditions are far from great, rolling around on the floor is tiring and difficult, yet every job you tackle with your expert knowledge enthusiasm & care, everything is lubed up & wiped where needed, 100% attention to detail & all the right tools with no corner cutting. I will look forward to seeing more, and I genuinely wish you a well deserved prosperous business. Im outside your area, but would happily pay extra for travelling the next time I needed a clutch.
Hi Kevin, Again thank you for sharing the video on the Golf. Well, at least rain stopped and the bolts/nuts underneath would not be rusty due to the oil leak. My God, it was like The Amoco Cadiz below deck!!🤣🤣 As always attention to detail when reassembling the unit. 👍👍👍
Real badman! Them boxes aint light i work on the ground too in my driveway i got 2 boxes to do yet again one for my daily csc leaking other for the 4wd conversion and performance clutch i have to do them at the same time because the one thats going 4wd has a a fresh clutch kit on it and im gonns throw that in the daily just gonna buy a new dmf even though its good its been in there probably since factory and its at 155k we got the daily at 100k ish You motivate me now & again when needed thank you stay safe bro 🙌
Another great video Kev. I watch to prepare myself for doing both my mk3 mondoes st220 and tdci. You've probably been asked before but why do you use rubber grease?
There's gotta be a car he doesn't know. Now don't get me wrong. I'm not saying there's gotta be a car. But if there is. I'm not saying he won't figure it out in a split second. 'Cos ...er...he's a smart guy....er...our Kevin here. Greetings.👋
Thank you Kevin for your quick response, ... it was only thanks to you that I dared to dismantle the box, you are doing a good job, thanks to you the impossible became possible for me. Greetings from Poland
This has got to be one of the most annoying jobs I've seen on this channel. You had to remove the intake, air box, battery, shifter assembly, and transmission mount from the engine bay. That's on top of the 2 CV axles and the actual clutch job of course.
www.williamsmobileclutch.co.uk 🇬🇧
Contact us for your clutch replacement.
A big thank you to another one of our RUclips customer for this repair.
Hi Kevin - this is my next job on my 2007 Golf Plus 1.9 TDI. The DMF rattle spells the need for a new flywheel and clutch. Thank you so much for videoing the process from start to finish. Leaving in all the little steps rather than editing some out will save me a lot of time. Best wishes for the future 😃😃
Ive watched a few of your videos, and im certainly impressed with the Zip & Zest that you attack these Jobs with, lets be honest the conditions are far from great, rolling around on the floor is tiring and difficult, yet every job you tackle with your expert knowledge enthusiasm & care, everything is lubed up & wiped where needed, 100% attention to detail & all the right tools with no corner cutting. I will look forward to seeing more, and I genuinely wish you a well deserved prosperous business. Im outside your area, but would happily pay extra for travelling the next time I needed a clutch.
Hi Kevin, Again thank you for sharing the video on the Golf. Well, at least rain stopped and the bolts/nuts underneath would not be rusty due to the oil leak. My God, it was like The Amoco Cadiz below deck!!🤣🤣 As always attention to detail when reassembling the unit. 👍👍👍
Real badman! Them boxes aint light i work on the ground too in my driveway i got 2 boxes to do yet again one for my daily csc leaking other for the 4wd conversion and performance clutch i have to do them at the same time because the one thats going 4wd has a a fresh clutch kit on it and im gonns throw that in the daily just gonna buy a new dmf even though its good its been in there probably since factory and its at 155k we got the daily at 100k ish
You motivate me now & again when needed thank you stay safe bro 🙌
You should also do stem valve seal replacement service aswell. I think you can do it in 4 hours!
Awesome job Kevin👌 love that trolley Jack. That’s Xmas pressie from the wife sorted!😁
😁🍻🍻
Appreciate these step by step videos, must be annoying having to make good video as you do the job. Hope YT income compensates enough.
I wouldn’t say it’s annoying. I thoroughly enjoy it for one.
And secondly I know it’ll be very useful for someone out there giving it a go.
@@WMCS the value and knowledge gained from your videos are amazing 👏
Pure perfection that 👌
Another great video Kev. I watch to prepare myself for doing both my mk3 mondoes st220 and tdci. You've probably been asked before but why do you use rubber grease?
How much would you charge for all this I’ve the exact same car what needs doing 👍
Superb kev
25:25 can you tell which gear in milwaukee you use to screw DFM ?
You are the best
There's gotta be a car he doesn't know. Now don't get me wrong. I'm not saying there's gotta be a car. But if there is. I'm not saying he won't figure it out in a split second. 'Cos ...er...he's a smart guy....er...our Kevin here. Greetings.👋
have a nice week buddy 😘😅
You posted already a video on automatic gearbox ?
Only manual transmission 🍻
@@WMCS is a video soon on a iveco ?
Hello 👋, nice job as usual 👍
Good work
Thank you..
Excellent. 👍
do you have any video of changing flywheel on dsg?
Not on DSG Sorry.
Mr. Kevin, in which gear of the milwaukee impact wrench are you tightening the wheel hub (the big screw)
Usually 2nd
Thank you Kevin for your quick response, ... it was only thanks to you that I dared to dismantle the box, you are doing a good job, thanks to you the impossible became possible for me. Greetings from Poland
Drinking tea and watching vid in Mother Russia)))
Excellent 🍻🍻🍻😁
What is that black thing you put underneeth the car?
Do you have to put it by some law or is it just you?
It’s interlocking mats.
Has there even been a specific model of car where you really struggled to do this or refuse to do the work on?
Lately I’ve stopped taking in VAG in-line transmission.
hello Kevin I have a voswagen touran car 2004 tdi lever gear 6 forward what is the transmission oil number of it thank you
It’s 75w90 MTF
@@WMCS thank you Kevin
very good kevin, sorry only the weathe !
What you drain off gerbox oil?
Yea that’s correct.
would you do the clutch on a fortyyear old mgb gt
I suppose it would be quite interesting. Yea
@@WMCS ok i will get in touch for a quote we are in pe28 oht
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Hey
This has got to be one of the most annoying jobs I've seen on this channel. You had to remove the intake, air box, battery, shifter assembly, and transmission mount from the engine bay.
That's on top of the 2 CV axles and the actual clutch job of course.
VW T4 2,5 TDI ACV engine, please, Kev! Cheers!
Have a browse though the channel. There’s one there 🍻
T5's all over the place, or maybe I'm being myopic...