I have just applied hot air by a hair dry, close contact, for 2 full minutes, onto the three chips: one behind the black metal passive cooler, and two nearby chips. It worked like a charm! Just disassemble the mainboard, remove passive cooler from behind the mainboard, and apply heat onto those three chips. I hope that works for you two!
@DominicGichane it was funny because you took that chip or something off and I was expected you to replace that and solder it on but instead went straight to just get another motherboard. Brilliant 😎
@@lachlanob The original heat pad under the heat sink is under performing due to age, hence allowing heat to affect solder joints of processor. Therefore, for a more lasting solution, replace with thermal paste nicely spread on the processor, then fix the heat sink and you are good to go.
I thought maybe I'd have hold down like function for 10 seconds when press power button, but changing the main board is way way easier and only takes 10 seconds :)
I had this problem on an LG LHB336 blue ray player. The first electronics place I took it to wanted $245 to fix but then they kept it 3 1/2 months and still couldn't fix it. The second place said it needed a "system control kit" and fixed it in a week for $80. Go figure. There are a lot of crooks out there.
What's is the problem when LG remote control is serving the same purpose that is all battons are only closing and opening the home theater is the problem with the remote or with the home theater?
Hi , I have Lg Blue Ray HOme cinema model no Hx906ta and it starea but remains in "please wait".Watching your video,I saw you changed a piece and i was wondering Shock and where i Could get one considering I am from Romania? I went to Lg with the system but they said they cannot do anything on it.Could you please guide me so I can repair mine?Thanks!Andreea
Have you ever repaired one of These lhb725 with the overheat Problem? The Fan Looks Like does not Work...and the Volume Turns automaticly down...Hope you can Help me...and i Hope too that i don't have to Change the Board!
@@DominicGichane I don't have a very bad failure, only when I have the volume more than 50 or above for more than 1 hour or less than 50 for more time...I hope that my board never gets burned...if it so I'll have to purchase a new one instead. Thank you for your time answering my questions! Greetings from México.
I want to ask, can anyone in the topic, there is such a device LGHB976TZW, the receiver itself is dead can not be repaired there is a replacement of the board is needed and I do not find spare parts for it anywhere, the buffer itself from the receiver is connected by air via Bluetooth, the other speakers are all connected to the buffer, respectively, they also do not work . Maybe there is some universal receiver that can turn on the buffer to make the whole system work?
Hello! LG soundbar NB3730A "Please wait" message scroll across and I don't know what is the problem and how can I fix this problem. Do you have any idea what can be the problem?
Hey guys! I solved the problem. Tried to put the mainboard in the oven for 30 minutes at 130C °. Let it cool down and then put it back in place. It sounds stupid but it worked for me! Covers the plastic parts with aluminum foil. Good luck to you
Eu não entendo nada do que você fala, mas mesmo assim muito obrigado. Eletrônica é mesmo uma língua universal, e consegui resolver um problema parecido com o seu.
If you have 'please wait' problem then u don't have to replace the motherboard. Simply use hair blower or heat gun on the motherboard for few minutes, this will make the system working again.
Il faut juste chauffer le carte mere avec soit un decapeur thermique sois un sèche cheveux ou sinon à mettre au four à 180 degrés il vas avoir un effet mécanique sur toute les micros soudure de toute façon je me suis dit foutu pour foutu autant essayer et âpres 2 essai de chauffe il c'est remis en hdmi1 !!! En espérant vous avoir aider...
Is that what the Mobile Phone - Generation called "i fixed the problem, hurray!!!!" - Sorry.... the only thing you must do is RE-SOLDER the Main-IC = Problem solved. Re-Solder solved 99% problems with the fu**ing LG Home Theaters - Sorry for my bad english and greetings from Germany -
NO YYOU CANNOT GET A NEW MOTHERBOARD......LG tell me that they no longer supply parts for items more than 6 yrs old. Call my a synic but isn't it strange how they stop working after about 6 to 10 yrs old mmmmm!
😂😂😂 I was watching so carefully, thinking that I can solve the similar problem on my LG home cinema. To change motherboard is a easiest and most logic way when your CPU is damaged. Why to make video for that?
Are you insane, what is simple about replacing a motherboard?????? If you want to buy it as a spare part, it is more expensive then whole stupid system. Be clever in the future, don't buy "all in one", get yourself little amp with two decent speakers what you can keep forever and if you need DVD or BluRay, keep buying new when they pack up
My second LG product , both seldom used , both broke down , absolute Rubbish. Mine have this please wait message - and i rather get a hammer than spend money on a new motherboard. Never ever LG again , not helpfull at all.
@@DominicGichane Is not a win is found the culcript componente and change it, this is 5 stars win. Buy a new System blue ray is better. tHE ISSUE WAS THE MEMORY wast of money.
I think you meant HT806 of which the part number is EBR72114873. There are many variations of this model. Some have blietooth and others dont. Some have wireless rear speakers while others dont. Tweet me @techsawa with a picture of the model number sticker and I will give you the exact spare part you are looking for.
I have just applied hot air by a hair dry, close contact, for 2 full minutes, onto the three chips: one behind the black metal passive cooler, and two nearby chips. It worked like a charm! Just disassemble the mainboard, remove passive cooler from behind the mainboard, and apply heat onto those three chips. I hope that works for you two!
A perfect way to solve the problem just replace the whole main board lol
A full replace of the main board???? that not a fix... That's like buying a new one
It's very simple: buy another motherboard!!!! Loooolllll
😂😂😂 simple
From where can I get
that’s why RUclips need a unlike botton
😭😭😭
Brilliant. That actually made me laugh out loud. Just replace the motherboard 😅
Don't hate the messenger 😂😂
@DominicGichane it was funny because you took that chip or something off and I was expected you to replace that and solder it on but instead went straight to just get another motherboard. Brilliant 😎
Thanks for wasting my time.
I fixed mine, by using hot air gun on the main processor. It's working good now.
Mate, you saved mine! Hair dryer round the proccesor for abit and it's golden! I imagine just some cold joints that needed abit of tlc.
@@lachlanob The original heat pad under the heat sink is under performing due to age, hence allowing heat to affect solder joints of processor. Therefore, for a more lasting solution, replace with thermal paste nicely spread on the processor, then fix the heat sink and you are good to go.
Can you make a video please, this dont help nathing 😂
Thanks mate, mine is working now.
I thought maybe I'd have hold down like function for 10 seconds when press power button, but changing the main board is way way easier and only takes 10 seconds :)
Same problem blue ray 3D 5.1home theater HTB3520 please send a solution
How to fix a car - There is a problem with the Engine. Replace the Engine.
Hi there!
How i can make the player region free please? I search every site on the web.
Hello!
I have the same problem with the bh7240c can you help me what motherboard do I need for it?
Hi I have BH 7540 and same problem. Where can I get a new motherboard or how can I find it? Thank you for your help
Do you think that replace the mother board should be easy ?
Hi, please can you send me link on where to buy this motherboard. I will appreciate your quick respond. Thanks
Wow... the ultimate click-bait. Well done sir.
Hi, where can I get this motherboard please? I will appreciate if I can have the link or the company name.. Thanks
I would like to have a new motherboard.
Do you know were i will bay?
I need help on my Lg Home theatre system lg bh6530t, showing a -protection,where can I get the motherboard
I had this problem on an LG LHB336 blue ray player. The first electronics place I took it to wanted $245 to fix but then they kept it 3 1/2 months and still couldn't fix it. The second place said it needed a "system control kit" and fixed it in a week for $80. Go figure. There are a lot of crooks out there.
Wow
Genius! Perfecto! Just space technologic!
Glad it worked
What's is the problem when LG remote control is serving the same purpose that is all battons are only closing and opening the home theater is the problem with the remote or with the home theater?
Thank you so much please my DVD is having the same problem how can I located you please
Mine is an LG 3D Blu-ray Wireless Home Theater HB966TRW and it is showing this error. Can you share where i can have its parts ordered? Thanks.
do you know the part number for the mother board in a lg hx906pa
Most simple solution: Buy a new Player from Samsung.
So funny!! That so easy, no Engineers thinking
from where i will buy motherboard ..... in market not available.... need lg 6340h home theatre mother board
Can I connect this HT to my computer?
Hi , I have Lg Blue Ray HOme cinema model no Hx906ta and it starea but remains in "please wait".Watching your video,I saw you changed a piece and i was wondering Shock and where i Could get one considering I am from Romania?
I went to Lg with the system but they said they cannot do anything on it.Could you please guide me so I can repair mine?Thanks!Andreea
Have you ever repaired one of These lhb725 with the overheat Problem? The Fan Looks Like does not Work...and the Volume Turns automaticly down...Hope you can Help me...and i Hope too that i don't have to Change the Board!
You have no other choice. The only solution is to change the main board.
@@DominicGichane I don't have a very bad failure, only when I have the volume more than 50 or above for more than 1 hour or less than 50 for more time...I hope that my board never gets burned...if it so I'll have to purchase a new one instead. Thank you for your time answering my questions! Greetings from México.
I want to ask, can anyone in the topic, there is such a device
LGHB976TZW, the receiver itself is dead can not be repaired there is a replacement of the board is needed and I do not find spare parts for it anywhere, the buffer itself from the receiver is connected by air via Bluetooth, the other speakers are all connected to the buffer, respectively, they also do not work . Maybe there is some universal receiver that can turn on the buffer to make the whole system work?
@dominic gichane sur quel site puis-je trouver la carte mère de mon home cinéma lg lhb625 ? Merci.
Can I get new mother board of 3D Blu -Ray DVD home theater
Hello! Where can I buy this mainboard? What is its article number or something? What price?
Hello! Same problem :( Can you write name mainboard from LG HB806TH and wheare can buy?
Hello!
LG soundbar NB3730A
"Please wait" message scroll across and I don't know what is the problem and how can I fix this problem.
Do you have any idea what can be the problem?
The motherboard need to be replaced. Same case with some LG home theaters here ruclips.net/video/pZoE8GOop3Q/видео.html
What i wanna know is how to access the service menu
How much cost i have asony same problem
Normally you should budget for around 50 to 70USD
I have sony bdv e280 anf its just says please wait and movie does not show. Please help.
Cómo se llama esa pieza que reemplazo?
D protection what can i do
Hey guys! I solved the problem. Tried to put the mainboard in the oven for 30 minutes at 130C °. Let it cool down and then put it back in place. It sounds stupid but it worked for me! Covers the plastic parts with aluminum foil. Good luck to you
Great tip!
I used a heat gun on my main board at 200 ° C for about 5 minutes and it went back to work. Mine is a LG HB906SBW model
obrigado pela dica. Fiz exatamente como descrito e meu home theater voltou a funcionar! Maravilha!
o modelo do meu é o LG HB906SBW
@@SuperMarciop fizeste como? No forno?
Eu não entendo nada do que você fala, mas mesmo assim muito obrigado. Eletrônica é mesmo uma língua universal, e consegui resolver um problema parecido com o seu.
Você teve que trocar a placa mãe tbm? O meu está dando a mesma mensagem
vc trocou a placa mãe? estou com o mesmo problema
@@daciodezza anakartın chip setin üzerine ısı uygularsanız sorununuz giderebilir
Você conseguiu trocar a placa mãe??? Estou com mesmo problema
My LG home theater is showing DVD/CD only nothing is functioning,it can't open and fm can't play,pls Could be the problem
Sy punya lg home teater layar lcd rudak itu gimana cara x apa fi ganti lcd saja
Así de esa forma sería más útil que diga cambie la main board y ya esta . Perdí mi tiempo
What is the model please
Sir explain how to repair this problem.anyone can replace the mother board
If you have 'please wait' problem then u don't have to replace the motherboard. Simply use hair blower or heat gun on the motherboard for few minutes, this will make the system working again.
Same Is Sue with the Sony Blue Ray
I have lg HT906TA
DVD PLAYER STOP WORKING
PLEASE HELP
Il faut juste chauffer le carte mere avec soit un decapeur thermique sois un sèche cheveux ou sinon à mettre au four à 180 degrés il vas avoir un effet mécanique sur toute les micros soudure de toute façon je me suis dit foutu pour foutu autant essayer et âpres 2 essai de chauffe il c'est remis en hdmi1 !!!
En espérant vous avoir aider...
Bonjour, merci pour votre précieux commentaire. Avez vous démonté entièrement la carte mère pour la faire chauffer ? Bonne journée
It works well listen to the static sound. It’s never sounded so good.
NICE SOLUTION ...BUY A NEW PLAYER,,,LOL
Sony HDB- DZ610 me pls wait show kar raha hai. Pls reply
Heat gun use kro motherboard pr 5-10 minute k liye. Fir please wait nhi aayga aur system bdiya chlega
У меня такая же проблемма, кто знает где можно взять такую плату?
dude is that what you change dvd motherboard
Are you LG Employee? Nice marketing strategy!
Fuck I’m going to buy a whole new player
Sometimes that's the only thing left to do
Dominic Gichane the damn thing just started working last night so we will see for how long. Lol
eso no es reparacion, alguien que identifique el componente electronico defectuoso y lo reemplace?
Arkadaş çözüm anakart değişimi ise 5 dakikalık sahte videoya ne gerek var. Zamanımızı boşa harcıyorsun.
I have face same problem from DH6330P
Is that what the Mobile Phone - Generation called "i fixed the problem, hurray!!!!" - Sorry.... the only thing you must do is RE-SOLDER the Main-IC = Problem solved. Re-Solder solved 99% problems with the fu**ing LG Home Theaters - Sorry for my bad english and greetings from Germany -
if it were easy to find those main boards :(
Is an error very common...
really?
Yes
its easy. yeah replace mb why it never come to my mind
Maksud x layar lcd rusak
Disculpa, mi blue ray lg enciende y todo pero enves de entrar a menu se queda la pantalla negra, que puede ser disculpe?
Display
Very simple: buy another one. Lost five minutes of my life.
Look a new good technician
Where do you buy the motherboard lol
Cristóbal C. Saldías buy a new unit and take out the mother board. Lol
Эх орёл! Он бы еще целиком аппарат заменил клиенту!!!)))
Aló hay Din DVD LG I'm working in the Pain dice please wait How you doing in disguise
Ninguno abla español kedo en las mismas noo
IT'S just A loose Cable.
That stupid board it cost a lot.. Tel us to solve in cheaper manner
NO YYOU CANNOT GET A NEW MOTHERBOARD......LG tell me that they no longer supply parts for items more than 6 yrs old. Call my a synic but isn't it strange how they stop working after about 6 to 10 yrs old mmmmm!
Might it be planned obsolescence? Maybe they want you to by a modern sound system with modern features.
You were tricky and not simple
Kkkkkk, trocando placa qualquer um resolve!!!!
😂😂😂 I was watching so carefully, thinking that I can solve the similar problem on my LG home cinema. To change motherboard is a easiest and most logic way when your CPU is damaged. Why to make video for that?
It is what it is :)
Este señor NO SABE😂😂
Por qué 😆😆
You are crazy you have nothing to say buying a new one will be the best
That is the only permanent solution
Are you insane, what is simple about replacing a motherboard?????? If you want to buy it as a spare part, it is more expensive then whole stupid system. Be clever in the future, don't buy "all in one", get yourself little amp with two decent speakers what you can keep forever and if you need DVD or BluRay, keep buying new when they pack up
Así hasta el más pendejo lo repara no manches pura pérdida de tiempo, casi cas mejor cambias el blu ray completo y problema resuelto 🤬🤬
What?
Esos no son tecnicos reparadores, solo son cambia piezas 😂
Al final alguien pudo solucionar este problema sin cambiar toda la placa base? Me acaba de suceder jaja 😢
My second LG product , both seldom used , both broke down , absolute Rubbish. Mine have this please wait message - and i rather get a hammer than spend money on a new motherboard. Never ever LG again , not helpfull at all.
Sometimes we have difficult decisions to make that are as a result that isn't our fault. I'm sorry for your experience
Mathaburd lloool
What a nonsense ... Swap A mobo
It is what it is
The title is miss leading. Should be how to change motherboard of bla bla bla. Seriously wasted my time.
Resolveu o quê ? Trocando a PCI principal fica fácil né mané. Fucks man
soo clever????
Omg 😳😂😂😂
so dont repair anything here just change allllllll board . crap. Bord changer...
I know it's hard to get a brand new motherboard but a win is still a win
@@DominicGichane Is not a win is found the culcript componente and change it, this is 5 stars win. Buy a new System blue ray is better. tHE ISSUE WAS THE MEMORY wast of money.
Stupid solution
That stupid board it cost a lot.. Tel us to solve in cheaper manner
Unfortunately that's the only solution
@@DominicGichane sure that is the only solution? Maybe it is a simple solution but with this it is better to buy a new recorder. Does not help.
Hello! Same problem :( Can you write name mainboard from LG HX906Txw and wheare can buy?
I think you meant HT806 of which the part number is EBR72114873.
There are many variations of this model. Some have blietooth and others dont. Some have wireless rear speakers while others dont. Tweet me @techsawa with a picture of the model number sticker and I will give you the exact spare part you are looking for.
@@DominicGichane HT806pm, whats the motherboard? Pls reply
@@DominicGichane HX906......... HELP!!!!! please wait problem