I had the same issues pulling the side tail light out. I even broke the side corner piece. Easiest way to remove it for me was to push it from the side corner forcefully back and pulling from the screw holes on the inside. Hope that helps. 2010 DE
I have the same issue, I'm thinking about just breaking is chiseling the plastic from the inside just to get enough wiggle room. It's impossible to my Lancer after wiggling it for 20 minutes
The casing will not come out I pried and chipped the corner, I literally pushed and pulled with excessive force. I gave up and am gonna drive with a burnt out brake light for the rest of my cars life.
Amazing video! I saw a video of some kid doing this and his camera man was whooshing around and trying to get all these crazy angles like it was a fast and furious movie, couldn't see shit.
Is there a way to remove the lights plastic case? I have a 2009 lancer and the trim around my lights are that ugly pink and I wanna make it black. Is that possible?
I want to replace the lights entirely (purchased aftermarket ones) will any extra disassembly be required i.e removing the rear bumper to get to extra connectors?
The main thing that can go wrong with any job like this is to break clips, fasteners, plastic screwdriver holes etc. You can minimise the chances of doing that by using the proper tools to remove the various bits and pieces in order to get to the bulb housing and the bulb itself. As always, take it slowly, don't force anything, and 99 times out of 100 it will all work out. Also, as the video shows, never handle bulbs with your bare hands. Gloves for the win. They protect the new bulbs and they protect your hands. Cheers from the Land Down Under.
Go into a auto parts place, give them your make and model, they will give you the right one even if they have to order it. You will spend 2-3 more dollars then getting it online but better to get the right one then to fuck up.
If it helps anyone... I had to use a wider screwdriver than the one he is using then pull from the center as he does (a little bit hard), it'll come of entire.
While this video was helpful and reasonably accurate, it failed to indicate that one must have the fingers of a seamstress and the shoulders of a linebacker. And two of those black studs disintegrated as I pried them out. Thanks, but ....
►W21W Light Bulb: amzn.to/3soYtdy
►W5W Light Bulb: amzn.to/44cSVQU
►W21/5W Light Bulb: amzn.to/3smzaJ7
►Screwdriver Set: amzn.to/44e2JKu
This is the kind of tutorial video we need. Straight to it.
This is the best how to video I’ve seen! No blah blah blah just clear and to the point
Thanks cor the video! A tail light and a reverse light went out on my 2009 Lancer. With your video it was a 15min job.
Just changed my parking light bulbs. This video was very helpful. Took minutes only.
Straight to it, no 2 mins of BS in the opening.thanks!
you deserve a like and a comment thx!
+Sklilx Haha thanks! :)
Really well done tutorial, straight to the point
Thanks! Simple video, but some of us are dummies when it comes to this.
Thanks for the demo ~ now I can replace all my original halogens to Leds !
What kind of VVO Clips are used here? Already broke 2 after removing the cover..
Simple and straight to the point! Great video thank you very much!!
I had the same issues pulling the side tail light out. I even broke the side corner piece. Easiest way to remove it for me was to push it from the side corner forcefully back and pulling from the screw holes on the inside. Hope that helps. 2010 DE
I wish i read your comment earlier
2:30 how do you pull it off so easily
For me it doesn't come off no matter how much I try
I have the same issue, I'm thinking about just breaking is chiseling the plastic from the inside just to get enough wiggle room. It's impossible to my Lancer after wiggling it for 20 minutes
What did you end up doing? I cannot get mine off either. I pulled on it for 20mins and nothing
Nice video, simple informative, no BS, thank you very much
The casing will not come out I pried and chipped the corner, I literally pushed and pulled with excessive force. I gave up and am gonna drive with a burnt out brake light for the rest of my cars life.
Just changed my brake light, thanks for making it so easy!
is it possible that bulbs work but stop lights wont?
What would happen if I put 7443 light buld to the back-up light socket? Will it still lights up?
What is the mini bulb? Im trying to replace mine need the right one.
Thank you! Easy to follow presentation with no 10 bs introduction!!! 👍👍👍👍👍
Exactly what I was looking for, for my wife's lancer. Thanks!
Can you post a video for the left one too
I have a video about the left side too.
been trying to pull it but cant do u push it first till it clicks
Amazing video! I saw a video of some kid doing this and his camera man was whooshing around and trying to get all these crazy angles like it was a fast and furious movie, couldn't see shit.
Is there a way to remove the lights plastic case? I have a 2009 lancer and the trim around my lights are that ugly pink and I wanna make it black. Is that possible?
I want to replace the lights entirely (purchased aftermarket ones) will any extra disassembly be required i.e removing the rear bumper to get to extra connectors?
Are both the large and small bulb on each side considered tail lights? Pretty sure all 4 of mine are out lol
Hi can show how to replace turn signals?
it's in the video :)
Thanks, and to think before watching this video I was going to pay Mitsubishi to change my right tail light Bulb. Thanks..
Does anyone know where the taillight bulbs fuse is located ?
How abt the front headlights ?
wat if i really want to remplace the light and not just the bulb ?
Mey rear tail not coming o after putting new bulb not sure why it's clicked bit doesn't turn on when light turn on :(
It's what I'm looking for!
🙏 Thanks! 👍🇨🇦
You're welcome! 😄
Can u suggest me any website where I can get 2000 lancer GLXI model parts... I wanna restore my old lancer..
Do you disconnect the battery before changing? Thanks! Nice video
Thanks of the simple, no BS instruction.
This was VERY helpful. Thank You!
Thank you. This was very helpful. I was ready to pull my hair out.
Thank you so much 😊 it seems like only you have done a video about replacing lancer rear light bulb 💡
The main thing that can go wrong with any job like this is to break clips, fasteners, plastic screwdriver holes etc. You can minimise the chances of doing that by using the proper tools to remove the various bits and pieces in order to get to the bulb housing and the bulb itself. As always, take it slowly, don't force anything, and 99 times out of 100 it will all work out. Also, as the video shows, never handle bulbs with your bare hands. Gloves for the win. They protect the new bulbs and they protect your hands. Cheers from the Land Down Under.
so the lancer has 6 bulbs for the tail lights?
how to check the bulb specification? i strongly believe bulbs come in all sorts of voltage n current ratings
Check up clubcj forums about it they usually have spec sheets and stuff like that.
Go into a auto parts place, give them your make and model, they will give you the right one even if they have to order it. You will spend 2-3 more dollars then getting it online but better to get the right one then to fuck up.
the best way that i learn
😉
Where is the side marker light?
What about front lights?
I was looking for a Video like this, Cheers.
what size wrench
Fantastic work buddy, can you please make a video on how to adjust head light bulb ???
Thank You for help and shaving money!
thanks for the help its much appreciated
What's the difference between 7440 and 7443? The tail lights that's inward, which does it use?
7443 are the brake lights and 7440 are the backup lights (reverse lights). Hope this help out.
I can't get mine out is there a secret to it?
Thanks a million.
Best tutorial ever.
Thank you so much! Helped me a lot!
Thanks for the video!!!i can change the bulp by myself.
If it helps anyone... I had to use a wider screwdriver than the one he is using then pull from the center as he does (a little bit hard), it'll come of entire.
This is it? Dealership tried charging me $50
Hahauravirgin hahah I checked tonight for freee
“Stealership”
Thanks very much
Thank you.
Thanks for the video
Great video - thank you.
If the tail light doesn’t come out after removing the two screws simply pull harder
Thank you for this video.
Thanks! This helped me out.
Thanks bru super helpful!
that is T10 right?
for the reverse lights
Thanks for the help
Thanks for the video! :)
Thank you!
While this video was helpful and reasonably accurate, it failed to indicate that one must have the fingers of a seamstress and the shoulders of a linebacker. And two of those black studs disintegrated as I pried them out. Thanks, but ....
Merci ! Thank's!
Thank you.
Nice one
Is that Michael Jackson changing the lights?
MJ CJ? ;)
This is not the indicator bulb lol it’s not in the book it’s on the panel
Straight to the f*cking point… thank you!
Thx
Jesus, no words, no bullshit
Thank you
Thank you