bro flickzy uses 3.3 x and y 1600dpi which is 6.6 800dpi just letting you guys know he used to use 8.9 x and y but that was a year ago and change his settings and sens so codelife you can do a settings review on flickzy he showed his settings in one of his twitch streams .
that 3.2 and 3.5 is a slow sense. if you want fast/consistent sens i use 1600 dpi, 7.2 x and y, 64% targeting, 50% scope. you can fully rotate your wrist while freebuilding and edit coursing, but if you need to hit a 180 degree flick, you can go right outside of your max wrist movement by using your arm and consistently hit 200 pumps with someone behind you. it is a little fast, i would recommend a heavier mouse for that sensitivity, but if you practice it with a light mouse, you will get it down. i have a 4ft mousepad, no issues with space, but you dont have to reset your hand, so you can react the exact second you need to. if you want you can go up to 70% targeting for ADS, but that can be to fast for some people. the fast targeting/ADS is for tracking people coming down from a launch pad that are trying to circle you to make you miss, but with the fast ADS you can track them and make it look like aimbot. ive already been banned once for it a couple years ago when the anti cheat was worse😂
@@himracks yeah I see but Ive tried using a faster sens but it’s so hard to control so I just use 3.5 and 40% targeting it’s fine but I can’t always spin a full 360
@@lxivdfn yessir, whatever works for you. full 360’s are required cuz if you arent ready for it, a controller player will run a circle around you, but if you have good crosshair placement you will be alright
I play zero build so i can use a slower sens and not change target sens, works just fine😆 If i did play with build, i would probable be using 6% with 60% target, feels nice to me.
i use an ultra wide and find i need to bump the xy up a bunch at 800dpi - anyone else finding the same? these pros use 1080p so i guess it works better for that
there is no way mongraal is gonna switch mouse because his build binds are on that mouse like the xtra side button as his floor its gonna mess w/ his muscle mem
No entiendo como usan 6.4 más 800dpi yo con mi 502G hero tengo 1,200dpi 9,2 en sensibilidad y 260 en construcción y edición para sentir rápido la animación. O esos mause son más rápido de dpi que uno de gama baja?
no. el dpi es la sensibilidad base del raton y en cualquiera de ellos sea de la gama que sea "800" de dpi x ejemplo va a ser el mismo. lo que si afectan son otros factores como el peso del mouse, los hz a lo que lo tengas configurado en su software, si es alambrico o inalambrico (yo lo siento mas rapido si lo conecto con el dongle de forma inalámbrica por lo que le bajo la sens), la alfombrilla, etc... igualmente es simple preferencia. hay gente que le gusta mas las sensibilidades baja y otra las altas. tambien te digo, no es solo el dpi sino tambien tu sensibilidad de windows, lo suyo es que si usas 800 de dpi y juegas a 16:9, la tengas en 10. para ello solamente ve a la configuracion de tu pc y busca "mouse". ponla a la mitad y ajustala hasta que este en 10 (importante q sea en ajustes basicos del mouse ya que en la configuracion avanzada seria la rayita numero 6 empezando desde la izquierda del todo). una vez la tengas en 10 baja y veras "configuracion adicional" o "configuracion avanzada del mouse" y en la segunda pestaña creo que es te sale "aceleracion del mouse" o "precision mejorada" es MUY IMPORTANTE que desmarques la casilla y le des a aplicar.
Can someone explain im upgrading very soon to pc but for now on ps4 why does 800 and 1600 feel very slow with 3.0 4.0 5.0 and 6 is there a problem to feel good i have to put it up to 1600dpi with 12 12 ?
Sensi é algo pessoal man, não é pq quase todos os PRO usam a config 800 DPI para 6% de mira, que o seu seria isso também. Você teria que praticar até saber qual sensi é melhor para você. Pega um mapa de mira e vai treinando até encontrar uma que você veja que está acertando muito e que se sente confiante nela.
First off, it’s gonna feel weird if you’re trying to plug a keyboard into a ps4 anyways. DPI stands for Dots Per inch, essentially the number of signals your mouse receives in the space of an inch. If you go from 800 dpi to 1600 dpi, your sense will feel double as fast. So if you went from 6% on 800, to 12% on 1600… you sense would feel 4 times as fast. Most of the time, lower sense on FN (4-6 ish) feels weird when you’re not used to playing on kbm, but as you hone in your skills, it’ll feel better as your crosshair placement improves, and you’re not playing as Flicky. Some people play on higher dpi because it technically should feel smoother (with more signal points) than 800. But like I said, if you’re playing on 60 fps on a ps4 with a mouse, that 60 fps is going to make it really hard to either one to feel good. If you do end up switching to PC, give it a try again. You’ll have less input delay and I’m assuming at least double the frames, depending on how nice your pc is.
I know that’s a lot to read, but you have to consider the conversion of what you’re feeling to what you’re seeing. Also ps4’s are notoriously bad for input delay when using kbm
Hello bro, can you please help me i want set CRU stretched res 1720x1080. But my native is 2560x1440 240hz and when i open Edit there is only my native res 2560x1440 on 144hz only not on 240hz. I will glad for help.
Like we can even tell at all? Yeah, clearly it’s possible, unless these pro players record themselves going into their mouse software and check the polling rate 😂
@browniex5120 clix , peter, acorn, cold, Mongraal, mrsavage, and like 40 other their one pros Peter's polling rate is 4k, clix's is 500... And it makes a big difference to to your sensitivity if peter played on 1k polling rate he would have to change his sensitivity to 9 percent x and y
The surface or your pad and the weight of your mouse has a huge impact on how your sens feels. 800. 6.4 is a bit too higher for me ngl. Right now I’m playing 1600-2.9 which feels perfectly fine when using a 50 gram mouse and a big speed pad.
Should I upgrade to gpx 2 or get dav3 pro or viper v3 pro? Currently have the gpx 1, have large hands and use palm grip
I have the dav3 pro its good for big hands and really comfortable would recommend, clicks feel amazing aswell
@@rapid2740 Ok, thank you!
@@rapid2740gpx 2 isn’t worth it
Viper v3 pro, better weight and clicks, dav3 pro better hand ergonomics and gpx 2 better shape (imo) and worst clicks
@@rapid2740 Ok, thanks!
bro flickzy uses 3.3 x and y 1600dpi which is 6.6 800dpi just letting you guys know he used to use 8.9 x and y but that was a year ago and change his settings and sens so codelife you can do a settings review on flickzy he showed his settings in one of his twitch streams .
Logitech G Pro Superlight 2 o Razer Viper V3 Pro? Which one is the best
V3 pro for 8000 Hz polling rate
G pro super light for sure
@@Dxrgon no razer is 3x better superlight is overrated
viper v3 pro by a *landslide*
I have both the viper v3 is slightly better imo
What’s a good 1600 dpi sens and targeting for not much mouse pad room?
3.2-3.5 and 40-45 targeting
@@frostydino28 thanks
that 3.2 and 3.5 is a slow sense. if you want fast/consistent sens i use 1600 dpi, 7.2 x and y, 64% targeting, 50% scope. you can fully rotate your wrist while freebuilding and edit coursing, but if you need to hit a 180 degree flick, you can go right outside of your max wrist movement by using your arm and consistently hit 200 pumps with someone behind you. it is a little fast, i would recommend a heavier mouse for that sensitivity, but if you practice it with a light mouse, you will get it down. i have a 4ft mousepad, no issues with space, but you dont have to reset your hand, so you can react the exact second you need to. if you want you can go up to 70% targeting for ADS, but that can be to fast for some people. the fast targeting/ADS is for tracking people coming down from a launch pad that are trying to circle you to make you miss, but with the fast ADS you can track them and make it look like aimbot. ive already been banned once for it a couple years ago when the anti cheat was worse😂
@@himracks yeah I see but Ive tried using a faster sens but it’s so hard to control so I just use 3.5 and 40% targeting it’s fine but I can’t always spin a full 360
@@lxivdfn yessir, whatever works for you. full 360’s are required cuz if you arent ready for it, a controller player will run a circle around you, but if you have good crosshair placement you will be alright
I play zero build so i can use a slower sens and not change target sens, works just fine😆 If i did play with build, i would probable be using 6% with 60% target, feels nice to me.
WHY ARE HALF OF THE PROS USING 800 DPI AND 6.4 X AND Y is it goated or what? I’ll try it
is it good
@@frostydino28 its not if u use 1600 on 4 its the same as 800 on 8 its just what they want to do
Was thinking the same maybe I’ll try it out
If you have a big mouse pad go for it
I use it and it is the only I feel comfortable on
i use an ultra wide and find i need to bump the xy up a bunch at 800dpi - anyone else finding the same? these pros use 1080p so i guess it works better for that
mongraal is now using 7.2% x and y and will be making switch to g pro, idk if he means superlight, superlight 2 or just normal g pro
there is no way mongraal is gonna switch mouse because his build binds are on that mouse like the xtra side button as his floor its gonna mess w/ his muscle mem
@@Crxckd1 he is he said on stream
@@surgelol2711 oh
@@Crxckd1 He said he is gonna try a new keybind for the floor
Which pro do you guys think has the best sense in this video
I’ve been using 4% x and y and 190% build and edit boost on 1600 dpi
… mine is 23.3 on y and X and 1800 dpi with 150 on build and edit sensitivity and targeting and scope are 62.4 am I cooked 😳☠️😳☠️
do you only use your fingertips?
Can make a video about Vico settings plz
bro share mouse grip as well...
Can anyone tell me muzz aim settings like scope and targeting
What polling rate do they use on their viper v3?
Probably 1-4k Fortnite can’t handle any higher. I’ve tried
@ I run 4k 360hz fine with a 7800x3d & 4070 super
@@Frame2I use 2khz with a 360hz monitor and 3060ti
what sens does veno play?
6 I believe
4.6 x and y 1:32
@@1ndonly_zayy nah just checked he actually uses 6% x and y
5.4 both 800dpi showed it on live stream
Guys stick to your own build and what your comfortable with. Everyone has thier own playstyle
I using a logitech G Pro Superlight, sens 7.2 7.2 800 DPI
What about the aim settings
Do this but with mouse grips
No entiendo como usan 6.4 más 800dpi yo con mi 502G hero tengo 1,200dpi 9,2 en sensibilidad y 260 en construcción y edición para sentir rápido la animación. O esos mause son más rápido de dpi que uno de gama baja?
Tengo la misma duda pero creo que es por el peso del mouse que usan y por el mousepad y claro estan acostumbrados a jugar a esas sensibilidades
no. el dpi es la sensibilidad base del raton y en cualquiera de ellos sea de la gama que sea "800" de dpi x ejemplo va a ser el mismo. lo que si afectan son otros factores como el peso del mouse, los hz a lo que lo tengas configurado en su software, si es alambrico o inalambrico (yo lo siento mas rapido si lo conecto con el dongle de forma inalámbrica por lo que le bajo la sens), la alfombrilla, etc... igualmente es simple preferencia. hay gente que le gusta mas las sensibilidades baja y otra las altas. tambien te digo, no es solo el dpi sino tambien tu sensibilidad de windows, lo suyo es que si usas 800 de dpi y juegas a 16:9, la tengas en 10. para ello solamente ve a la configuracion de tu pc y busca "mouse". ponla a la mitad y ajustala hasta que este en 10 (importante q sea en ajustes basicos del mouse ya que en la configuracion avanzada seria la rayita numero 6 empezando desde la izquierda del todo). una vez la tengas en 10 baja y veras "configuracion adicional" o "configuracion avanzada del mouse" y en la segunda pestaña creo que es te sale "aceleracion del mouse" o "precision mejorada" es MUY IMPORTANTE que desmarques la casilla y le des a aplicar.
Thank you so much! i beat my friend in a 1v1 10-0
What sense did you lick
Just after I bought a mouse😭
I use Scyrox v8, 7.7 x and y
Bugha just switched back to the Logitech G Pro X Superlight 2
Can someone explain im upgrading very soon to pc but for now on ps4 why does 800 and 1600 feel very slow with 3.0 4.0 5.0 and 6 is there a problem to feel good i have to put it up to 1600dpi with 12 12 ?
Sensi é algo pessoal man, não é pq quase todos os PRO usam a config 800 DPI para 6% de mira, que o seu seria isso também. Você teria que praticar até saber qual sensi é melhor para você. Pega um mapa de mira e vai treinando até encontrar uma que você veja que está acertando muito e que se sente confiante nela.
First off, it’s gonna feel weird if you’re trying to plug a keyboard into a ps4 anyways. DPI stands for Dots Per inch, essentially the number of signals your mouse receives in the space of an inch. If you go from 800 dpi to 1600 dpi, your sense will feel double as fast. So if you went from 6% on 800, to 12% on 1600… you sense would feel 4 times as fast. Most of the time, lower sense on FN (4-6 ish) feels weird when you’re not used to playing on kbm, but as you hone in your skills, it’ll feel better as your crosshair placement improves, and you’re not playing as Flicky. Some people play on higher dpi because it technically should feel smoother (with more signal points) than 800. But like I said, if you’re playing on 60 fps on a ps4 with a mouse, that 60 fps is going to make it really hard to either one to feel good. If you do end up switching to PC, give it a try again. You’ll have less input delay and I’m assuming at least double the frames, depending on how nice your pc is.
I know that’s a lot to read, but you have to consider the conversion of what you’re feeling to what you’re seeing. Also ps4’s are notoriously bad for input delay when using kbm
Check in YT about electrical input lag) Few people know about this
Do this video but with keyboard s
Should I get viper v3 pro or Logitech gpx super light 2? I have a Logitech g305 right now and don’t like the click, it feels delayed to me.
viper v3 pro
v3 4sure
superlight 2 for sure
Summary: most pros use either a logitech g pro superlight or a viper v3 pro, with a sensitivity typically between 6-9% (800 dpi)
Bro Controller Version pls
i use 20 percent x and y with 600 dpi
Im using 1600 dpi and 6 x and y. Is that high?
yes. 1600 dpi with 6 on x,y = 800 dpi with 12 on x,y. Average pro sens was about 7 with 800 dpi so your sens is a lot higher than theirs.
can you do controller players next pls
I don't understand how Merstach plays, 3.3 sense 1600 dpi is very little
That's 6.6 in 800 dpi so that's normal
Is this without mouse acceleration on windows?
@@zaak.mp4 I think that doesn't apply
why is my sens so slow like insanely slow
Hello bro, can you please help me i want set CRU stretched res 1720x1080. But my native is 2560x1440 240hz and when i open Edit there is only my native res 2560x1440 on 144hz only not on 240hz. I will glad for help.
i use x:40% y:40% 800dpi glorious model I
do you only use your fingertips to aim 😭
flickzy is using a 3.3 3.3 with 1600 dpi
@codelife so no polling rate?
Like we can even tell at all? Yeah, clearly it’s possible, unless these pro players record themselves going into their mouse software and check the polling rate 😂
@browniex5120 clix , peter, acorn, cold, Mongraal, mrsavage, and like 40 other their one pros Peter's polling rate is 4k, clix's is 500...
And it makes a big difference to to your sensitivity if peter played on 1k polling rate he would have to change his sensitivity to 9 percent x and y
@@Numb3r_1Jackson peter is on 1000 polling rate he said it in a recent stream
@@raihanmayet8868 he won grands on 4k he must have switched after
How many clicks is 800 dpi
2
The pro that uses 1100 dpi is goated
and what mouse is codelife using is the real question?
Keyboard next
He did
@@RAHFN12 bet
1:53
Mongraal is the only one with a heavy mouse lol
guys i’m on 3.7 x and y 800 dpi is that normal?
That's low sense
what about windows pointer speed 😭
Thats just for windows environment.
@@Turobu realised tat
Starlight-12 Phantom is not $666
They look like they’re MOVING on 800dpi meanwhile I be looking slow as shit lol
Guy's i have a question i put the potato graphics today and now i cant switch to the normal graphics how i do it
Cooked
Ask Peterbot for all he’s sens pls
Bro, i own 5$ mouse
all play on 360hz thjats a difference
Yikes! I'm on a good ol' Razer Viper Mini and got used to...
1000 polling rate
3200 dpi
X&Y 11
wtf lemme try that rq
what the fuck, how do you do that??? can't even track well, literally only makes sense for a heavier mouse for that imo
@@blaiddfumbler I'll try record a game play and upload it, if you wanna see how it looks.
rezon plays with a normal g pro not supperlight
800 dpi and 6.4 is fkn slow, are pros actually playing that it takes so much just to 360
I should’ve included the mousepads aswell. I feel like they make a big difference with the glide you get on them
@@codelifeis the steelseries qck heavy good ?
The surface or your pad and the weight of your mouse has a huge impact on how your sens feels. 800. 6.4 is a bit too higher for me ngl. Right now I’m playing 1600-2.9 which feels perfectly fine when using a 50 gram mouse and a big speed pad.
yes but they all have big mousepads so they can actually move their arms quickly. the lowest sens you can be fast with is the best sens
me at 3.0 x and y with 800 dpi
I use 6.6 x/y and 3000 dpi am I cooked it just feels so smooth
I used 3200 dpi with 10 x/y too but idk bro its smooth but i should play lower sens and dpi
jannisz is using 5.6 not 6.5
rezon is usen g pro normal not superlight
Noice
bro its so slow on me
daddy clix
what peterbot???
whats their windows sens?
default 6, enhance off
that doesnt apply in game
Peter have 6.3
A lot of the sensitivities are wrong
Like what ones
first w
NO SECOND
higher dpi has lower input delay but 800 is the main go to for most players
There’s close to no difference if you’re not over a thousand polling rate
WHAT ABOUT THE POLLING RATE ??
Polling rate is not that important bro. Most of them are probably on 2k
@@kxenyy polling rate is SOOO important i use 4k
@@boredomv2 It’s not. I use 4k as well, it’s a placebo and doesn’t actually make a difference over 2k.
@@kxenyyis it a big difference from 1k
@@GatoradeFan23 1-2K is the best. Say goodbye to your battery life more quickly on 4-8K polling 😂
mongraal is using 7.2
dubs
w
bro i might be aids then idk i use 800 dpi and 20.2 on x and y
I use 800dpi 13.0xy, I dont get how they can build and aim that fast with such low sens
@@ErossYT samee
peterbots is the best even though he is cheating
how is he cheating at lan?
Sens doesn’t matter lol everyone cheats Fortnite honestly currupt with legit cheaters 😂💀💀
LOL
first
Everyone on a wireless mouse 😂 I am soooo glad that I have a wired mouse.
copium
10th comment
1st
do you want medal or something
Can Anyone follow me?
Just gave you a follow
@@muhammadtahanouman6771 thanks
first
This is the first comment