The load carrying capacity and the flat-bed material do not match. The flat-bed material used is 10 times over rated. The truck bed cannot carry more weight than the bearing capacity of the tires. So basically this is a design based on No calculations. Just built because they wanted to build.
True they lack standards but you cannot view everything from a first monoscope. Necessity dictates some of these action, they build just what they need and will repair it if it does not work. Also, they need to employ people so that they not flock to your cities and seek welfare grants.
At least two reasons. The men who own these factories have no regard for the lives of their workers either on the job or away. For every worker there are countless others willing to take their place. Some workers own nothing but a filthy loin cloth. Most wear rubber clogs for foot wear, millions own no shoes. Safety equipment is ignored by the factory owners. Ship breaking accounts for thousands of deaths every year. If a worker becomes injured he loses his job. They make a few rupees a day, most have large families and live in squalor and on the verge of starvation. Both the government and the factory owners turn a blind eye to these helpless people
Great video but my concern is for the staff who are working without the proper PPE, maybe the boss of Annamalai Trailers can replace them when needed, good workers who know what they’re doing are hard to come by, the boss needs to take care of them and stop skimping on the essentials such as proper gloves steel toe capped boots and decent welding masks at least.
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
150 тонн он не выдержит, слишком мало колес, 16 колес с максимальной нагрузочной способностью в 6 тонн на каждое, это 96 тонн, на тягач 55 тонн это очень много, да ещё и вес самого прицепа минимум 25 тонн, а вероятно и под 35, то есть общий вес прицепа с грузом у него за 180 тонн будет, для такого веса нужно ещё дополнительные оси и минимум 16 шин, по всей его длинне
Good video but they should not remove the Flux while it is still hot whilst Submerged Arc Welding. This will make the molten metal porous. If you leave it, it peels off itself when it cools. Apart from that, a good finished product, well done👍👍
I probably would have did a little more reinforcement with boom connection from the flat part ( guest plates & bolts ) and that small kingpin connected to a single plate ? Giant mass for key parts ...
Don David ahí le mando ese vídeo para que se acuerde de cuando nosotros viajamos a dejar oh a recojer algún un D11 se recuerda que tiempos aquellos no cree!
Dear Proprietors of Annamalai Trailers, Super works and best quality. In order to enhance the process quality of working stages, please ensure Best safety and PPE to the workers.
You gotta love these guys' skill and ingenuity, doing with what tools they have, to produce outstanding heavy duty equipment! However, them working heavy metal with no safety shoes on was painful to watch!
@@kareem8533 always some stupid lame excuse like this. The point is NOT to make someone better!! The whole point is about SAFETY!! You can be the best at a certain job, & still get injured!!
Jesus folks, don’t watch if you’re worried about their ppe or safety glasses… these men are building something half you “welders” on here couldn’t imagine doing without all your cranes, lifts and safety gloves
O interessante é o modo artesanal, feito ao ar livre, pessoas trabalhando sem proteção nenhuma, alguns parecem vestido apenas com um pano tapando a genitália, mas parece que no final tudo sai como eles querem! Realmente a India é algo que para os brasileiros é muito diferente!
شاه تیرها بیشتر گلویی باید یک تکه ساخته بشن شاسی اصلی پهنای کمیداره شترگلویی زیاد بزرگ که وزن اضافی تحمیل میکنه برای ۵۰تن مناسبه ولی بالای ۶۰تن از شتر گلویی و شانگهای عقب احتمال شکستنش زیاده
you guys came from another planet . this is awesome you guys have given me so much confidence .god bless u guys . which country is this please ? god bless
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
The load carrying capacity and the flat-bed material do not match. The flat-bed material used is 10 times over rated. The truck bed cannot carry more weight than the bearing capacity of the tires. So basically this is a design based on No calculations. Just built because they wanted to build.
True they lack standards but you cannot view everything from a first monoscope. Necessity dictates some of these action, they build just what they need and will repair it if it does not work. Also, they need to employ people so that they not flock to your cities and seek welfare grants.
I honestly love all types of people worldwide who lets nothing stop them from accomplishing any thing they want with what they got.
Everything but prosperity.
hard work done by skilled men in primitive conditions using basic tools. VERY GOOD JOB: viewed in San Diego, California USA
The music is like a piece of hair in a plate of good tasty soup.
sorry it aInt down home hillbilly country.,
Could do without the entirely avoidable music.
Impressive. Hand prybars, etc. Looks like a good sq. trailer frame.
How can a fabrication works not provide a basic $5 welding helmet to its workers ?
At least two reasons. The men who own these factories have no regard for the lives of their workers either on the job or away. For every worker there are countless others willing to take their place. Some workers own nothing but a filthy loin cloth. Most wear rubber clogs for foot wear, millions own no shoes. Safety equipment is ignored by the factory owners. Ship breaking accounts for thousands of deaths every year. If a worker becomes injured he loses his job. They make a few rupees a day, most have large families and live in squalor and on the verge of starvation. Both the government and the factory owners turn a blind eye to these helpless people
And hows about safety shoe??😅😅
Because we are not on the luxury side of DOLLAR!!!!
Most of you westerners are stupid enough to not understand money.
they are doing for years, thats how it operated when you private own workshop who does less cost than corporate companies
@@Timothy-lb2vrf***k ur own business
I genuinely enjoyed that, was a great watch thank you❤🙌
Talented and gifted person nice to see them working together 😊 they must have PPE for safety precaution, keep up your good work good work
🙂🫡
how do you change the rear tires that are inside the frame rails
Very nice work bro, all the best 🙏
ابداع بامكانيات بسيطه واحلى لايك ومتابعه من الاردن
With that music makes me wanna build my own trailer right now 👏😎👏
Amazingly Beautiful Work😊
Great video but my concern is for the staff who are working without the proper PPE, maybe the boss of Annamalai Trailers can replace them when needed, good workers who know what they’re doing are hard to come by, the boss needs to take care of them and stop skimping on the essentials such as proper gloves steel toe capped boots and decent welding masks at least.
The BOSS and FORMAN couldn’t care less about these guys. They do the work or they get fired, on the spot.
Sen ne diyorsun, adamlarda teknoloji namına hiç bir şey yok. Ölçümleri bile şerit metrenin ucundan bakarak, göz kararı yapıyorlar.
Proud men, build great trailers.🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
super true maistri all handmade wonderful work
Very much informative.
Please upload high bed trailer videos
Thanks
150 тонн он не выдержит, слишком мало колес, 16 колес с максимальной нагрузочной способностью в 6 тонн на каждое, это 96 тонн, на тягач 55 тонн это очень много, да ещё и вес самого прицепа минимум 25 тонн, а вероятно и под 35, то есть общий вес прицепа с грузом у него за 180 тонн будет, для такого веса нужно ещё дополнительные оси и минимум 16 шин, по всей его длинне
Add 8 tyres of puller
What is the dead weight of that trailer?They put a lot of steel in it.
This is 100 ton trailer not 150.
в России тоже делают 150 тонные прицепы на 24 колеса и все ездит и не ломается
@@galaguz разницы между 16 и 24 не замечаешь?)))
Profissionais nesta área às vezes não encontram facilmente, parabéns top dos top esta prancha
Good video but they should not remove the Flux while it is still hot whilst Submerged Arc Welding. This will make the molten metal porous. If you leave it, it peels off itself when it cools. Apart from that, a good finished product, well done👍👍
Sorry bro
Ok
@@namakkallorryengineeringwo8007how much for that trailer
Great video. BUT TURN MUSIC OFF. We not at a disco
😂👌👌👌
😂😂😂,,,👍👍.
press volume button lower at zero.
Problem solved
I probably would have did a little more reinforcement with boom connection from the flat part ( guest plates & bolts ) and that small kingpin connected to a single plate ? Giant mass for key parts ...
This would work great hauling my lawn care equipment.
It's a heavy beast of a trailer for sure better stock up on wheel bearings !!🤔👍👍👍👍
Would have been better if you had used the actual sounds of the workers, and not used a soundtrack. The music is distracting.
Man look what you can accomplish with basic tools imagine what you could build. If you had the tools we have here in the US.
Mantap proses trailer nya bosku
Сколько времени у вас ушло на работу?
Camera movements and zooms too fast and too short!
give you a headache!!!
great work
Those guys really know their jobs
Yg pakek sarung....bingung ndak tau mau ngerjain apa.🤣🤭mondar -mandir.🤣but trailer...so good.good work.
Don David ahí le mando ese vídeo para que se acuerde de cuando nosotros viajamos a dejar oh a recojer algún un D11 se recuerda que tiempos aquellos no cree!
9.40 the blue press is called an Aggerdale Press. I used similar 60 years ago in UK industry.
Grandes maestros. Muchas bendiciones, felicidades.
Quite a feat with the equipment provided seems strange they only fit single diaphram brake actuators on a new trailer
Your work is very good. Please safety at work
Good strong trailer that one. Dunno about 150 tonnes but it would easily carry a 50t excavator.
That would easily Tare around 30 and 50T on looking at the construction of it.
Parabéns pelo profissionais. Serviço nota 10 . Adailton - Brasil!
Great Job ❤
அருமை அருமை
New subscribed from Somalia
Thanks brother
@@namakkallorryengineeringwo8007how much for that trailer
Flange Bend remove பன்றதில்லையா
I don't think you need the music.
Dear Proprietors of Annamalai Trailers,
Super works and best quality. In order to enhance the process quality of working stages, please ensure Best safety and PPE to the workers.
Best safety and PPE to the workers. That's not going to happen.
Good content. Nice ad for a heavy trailer. Stay safe. Bless.
I from malaysaia..good india fower
لقد ادعمتك في قناتك شكرا لكم
They are all hard working people.and have a satisfying result of work...but all of them don't understand safety or they don't mind it...
Nice Work.
کام تو بہت زبردست ہے لیکن حفاظتی انتظامات نہیں ہے۔
How can this trailer load 150t when the truck can only cary 15t - 20t on the king pin? Thats not gonna work 🤷🏻
You gotta love these guys' skill and ingenuity, doing with what tools they have, to produce outstanding heavy duty equipment!
However, them working heavy metal with no safety shoes on was painful to watch!
At least they're wearing sandals.
Safety shoes don't make them better welders...send them to welding school instead. Take this from a pro.
@@kareem8533 always some stupid lame excuse like this. The point is NOT to make someone better!!
The whole point is about SAFETY!! You can be the best at a certain job, & still get injured!!
@@timothygeiger8271 Ok Timothy, I got it.
You should load up on RUclips the Pakistanis casting metal in sandals. LOL.
Is this a musical show?
الهند ، عندما يرفع الفقراء التحدي ،تحياتنا لشعوب المكافحة
Super sterk ❤❤❤❤
Good job brother ❤
New subscriber here 💯 idol I'm Apo lakay Sebastian.
Молодцы ребята. Всё на коленках.
sending full support friend i hope see you around my house God Bless
Video này được quay ở India ?
This video was shot in India ?
Yes. It is in Namakkal, Tamilnadu State, South India.
Yes that's taff good so good, it a rear engineer good fabrication
Good job 👍👍
How much to build cast
Sera q ae num existe Mig e mascara de escurecimento automatic?
Better with no music
Im an imotional mess, yeah yeah!🤣🤣🤣
Agreed, no music
Yes the music is terrible. I like the video but I won't be subscribing if I have to listen to that
Very good 👍🏻👍🏻👍🏻👍🏻👍🏻
Great job but no saftey tool
❤❤🎉🎉nice
Super travail bravo ❤
Jesus folks, don’t watch if you’re worried about their ppe or safety glasses… these men are building something half you “welders” on here couldn’t imagine doing without all your cranes, lifts and safety gloves
What rod are you guys running
Super anna👍👌
Amazing!!
Мне такой к мотоблоку нужен, сделаете?)))
Amazing skill bro
No music please.
Good
Nice work
best.....❤❤❤
Great job respect ✊
வாழ்க வளமுடன் நண்பரே
what are they hauling on these? battleships?
Gostei do vídeo ! Qual nome desta solda ? Rio de Janeiro Brasil !
Like the safety flipflops
Nice
Great work but safety is lacking for the men and why do the men lift so many parts when you have lifting equipment there?
👌👌👌👌👍👍
Coast of trailer for building it.
how much?
Negara india , pakistan,or bangladesh?
RTO approved?
सुपर ट्रू मास्टरी सभी हस्तनिर्मित अद्भुत काम
Super
O interessante é o modo artesanal, feito ao ar livre, pessoas trabalhando sem proteção nenhuma, alguns parecem vestido apenas com um pano tapando a genitália, mas parece que no final tudo sai como eles querem!
Realmente a India é algo que para os brasileiros é muito diferente!
Great job, guys . 👍👍👍👍👍👍👍
شاه تیرها بیشتر گلویی باید یک تکه ساخته بشن شاسی اصلی پهنای کمیداره شترگلویی زیاد بزرگ که وزن اضافی تحمیل میکنه برای ۵۰تن مناسبه ولی بالای ۶۰تن از شتر گلویی و شانگهای عقب احتمال شکستنش زیاده
Yes correct bro
Great build, terrible music.
you guys came from another planet . this is awesome you guys have given me so much confidence .god bless u guys . which country is this please ? god bless
India bro
Brownsville