I tried doing this repair, may I say how easy he makes it look , he has true skills which come with years of practice, I tried doing this repairs while the motherboard was connected to the frame , it failed as the frame was acting has a huge heat sink which stopped the solder from melting, but one day I will be as good as you hahaha, may I ask what microscope you use ? Do you recommend the AD106S?
I done the same on my ipad mini 2 I damaged two pins but the digitizer worked fine with two missing pins I did not bother getting it repaired I just use it, and works fine
This is my problem now with my ipad mini 2 i didnt known that that connector is to weak. Now i dont know if my newly purchased digitizer is defective or only that connector is damage i see 3 gold bar is removed 😌
When i add flux then hot air, solders not melting. What you think the problem could be? I'm using Amtech flux and it says lead free. Maybe it's the problem?
Hi, I have a question. I have 3 iphones that have no power. After putting the boards under ther thermal camera the CPU is the hottest point on the board, does that mean that the short is on CPU itself?
It depends on the phone, I would consult your tools and schematics for the device/s in this situation. Though their is a moderate probability that the cpu does contain a short. Troubleshooting is your friend to find the solution.
CPU heat does not mean CPU short. CPU gets hot when it turns on. Unusual high heat or single heat spot on the CPU could possibly mean short but it's uncommon for CPU's to short out unless the device suffered liquid damage.
My kid cracked her screen on her iPad and it was working fine before I tried to replace the screen. Now it’s ghosting with or without a digitizer. Please help!
I tried doing this repair, may I say how easy he makes it look , he has true skills which come with years of practice, I tried doing this repairs while the motherboard was connected to the frame , it failed as the frame was acting has a huge heat sink which stopped the solder from melting, but one day I will be as good as you hahaha, may I ask what microscope you use ? Do you recommend the AD106S?
The best channel ever
Just changed 78pin connector in samsung using your advices. Everything works, thanks!
Hi mate, I like your lab, work, design, and skills. Congrats!
I done the same on my ipad mini 2 I damaged two pins but the digitizer worked fine with two missing pins
I did not bother getting it repaired I just use it, and works fine
How much would something like this cost? Same thing happened to our iPad mini 2
This is my problem now with my ipad mini 2 i didnt known that that connector is to weak. Now i dont know if my newly purchased digitizer is defective or only that connector is damage i see 3 gold bar is removed 😌
Bom dia ! Quantos graus você usou ? Qual fluxo usou ?
I love your explication 🙏
Sir what liquids did you apply??
Please give me an Advise
How do you handle it
If the customer says their LCD was working though it is not working
How did you apply the solder on the pads? Why does it stick to the pad?
Have you tried using kapton tape as a heat shield?
If the digitizer connector is bad, what are symptoms of it being bad? Not working at all? Will it cause ghosting?
When i add flux then hot air, solders not melting. What you think the problem could be? I'm using Amtech flux and it says lead free. Maybe it's the problem?
Nice Video my friend
Nice job again
So how much do u charge to put a new digitizer connector?
Required temp. For hot air sir?
We're would we send ipad to get fixed by you
Hello, i think i damaged my data connector trying to plug it back in the screen wont turn on. How much will it cost to repair?
Hi, I have a question. I have 3 iphones that have no power. After putting the boards under ther thermal camera the CPU is the hottest point on the board, does that mean that the short is on CPU itself?
It depends on the phone, I would consult your tools and schematics for the device/s in this situation. Though their is a moderate probability that the cpu does contain a short. Troubleshooting is your friend to find the solution.
CPU heat does not mean CPU short. CPU gets hot when it turns on. Unusual high heat or single heat spot on the CPU could possibly mean short but it's uncommon for CPU's to short out unless the device suffered liquid damage.
@@NorthridgeFix Thank you for the response, I wish you successful repairs!
@@NorthridgeFix please u what's app no give me sir
@@NorthridgeFix +94774560561 is may what's app no plz call me sir
Awesome ✌️✌️✌️
well done
My kid cracked her screen on her iPad and it was working fine before I tried to replace the screen. Now it’s ghosting with or without a digitizer. Please help!
I tried this and by connector flew away, even with low air
liked the video