2016 Buick Encore. Doing mine because of code p0171. It has a ruptured diaphragm again. This time I bought the vc3 Cruz kit. Hopefully this is the last time I need to do this. Thanks for the video. I almost forgot you need to add silicone where the timing cover meets the head. No mention in Alldatadiy?
Why cleaning the valve coven when you can change it , is very cheap to do it !! That way you don’t have problems with a diaphragm failure and a bunch of codes.. good job and thanks !!
Could be couple things like : evap emission purge solenoid valance ,pcv,check for vacum leaks .. Check air cleaner for outlet duct for splits Check vacum , air leaks Verify good fuel quality and proper pressure Clean MAF sensor (with breaks clean and dry/blow off right away with air
What’s the spray you used to clean? What’s that other part broken you had to replace? What you used with the drill to scrape leftover material?
2016 Buick Encore. Doing mine because of code p0171. It has a ruptured diaphragm again. This time I bought the vc3 Cruz kit. Hopefully this is the last time I need to do this. Thanks for the video. I almost forgot you need to add silicone where the timing cover meets the head. No mention in Alldatadiy?
Gracias ermanos gracias me sirvió mucho dios te bendiga
Why cleaning the valve coven when you can change it , is very cheap to do it !! That way you don’t have problems with a diaphragm failure and a bunch of codes.. good job and thanks !!
Gasket I got from felpro has oil rings where do they go
Nice 👍
Hi im doing the same job right now for my mom do u remember what size f e- torx that is
71 in lbs
What are the torque specs on the bolts? Did I miss that I'm the video?
in the video....
Yes It’s in video
@@AutomotiveDysfunction Ty!
I got it done. I didn't have a torque wrench that goes that low. Had to do it by feel.
71ft lbs
I’m getting code p0171 dealer saying cam shaft cover…
Could be couple things like : evap emission purge solenoid valance ,pcv,check for vacum leaks ..
Check air cleaner for outlet duct for splits
Check vacum , air leaks
Verify good fuel quality and proper pressure
Clean MAF sensor (with breaks clean and dry/blow off right away with air
Yes it could be … get new camshaft cover with new gasket
Could this cause a p0171 code?
yes
Most likely the diaphragm on the upper right hand side of the cover.
Mines has the same code also stablitrack light comes on and off
What’s the torque spec mf?!? Jesus
8NM (71 LB In)