SolidWorks Tutorial for IntermediateExercise#1
HTML-код
- Опубликовано: 23 авг 2024
- Watch my 1-Hour free course ► bit.ly/SolidWor...
After that, you can consider checking out my ultimate SolidWorks Course.
SolidWorks exercise for beginners #1 - Part modeling
In this video, you will learn how to create a 3D model from a 2D sketch.
Hi, my name is Ryan and I would like to hear your opinions about this video. Please let me know what you think.
Download the drawing sheet here: www.solidworks...
Difficulty: Beginners - Intermediates
Features used:
- Extruded Boss/Bass
- Extruded Cut
- Fillet
Techniques used:
- Reusing a sketch
- Thin feature (extrude)
Website: solidworkstuto...
Membership: solidworkstuto...
Tutorials: solidworkstuto...
I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners
If you are interested in a full SolidWorks course sign up in my website to get notified about the release date www.solidworkstutorials.net/
Hello Aryan
I hope you are well,
Regarding the explanation of the SolidWorks Program from 2019 until the newest version 2021, I really appreciate you with a grade of 10 because you do the explanation and orientation very well.
The person who watches the videos will learn a lot because they do the explanation very well in grammar and I wish you and your health success and thank you for sharing your time with us to teach us solidworks.
In this model, you only need two sketches and work with sheet metal: one sketch from above describes the entire shape on this plane, the other sketch is created on a bend. No chamfers needed, everything is set up in sheet metal and done in half the time.
I like your view
Jesus this took me forever! Tried doing it without help just from the first frame sketch, and I sure need more practice sketching lol.
But you did it, that is all that matters
Hi Aryan, this was a great excercise, i have found the opportunity to compare your time with mine, determine what im doing inconveniently and how can i improve myself. thank you.
That's the spirit!
can you please show mass property at the end so we know if we made the part right aswell.
I'll try and do that, so that you can confirm your answers after each video.
Please explain why i cannot highlight the area just like in 4:02 when using boss-extrude :( spent hours trying to solve this problem. I followed the steps from the beginning :/ please help, thanks! God bless!
did you first click on the sketch to select it? otherwise it wouldnt work
SolidworksTutorials Thanks for the response. Yes, I clicked it... but thankfully I'm able to finish doing this video. It seems that every time I apply extruded cut to a sketch I am not able to reuse it for the extruded boss, I cannot highlight its contours because it says "the sketch has both open and closed contours". What do you think is the problem? I was only able to finish this video by doing again the same sketch on the face of the feature then applying extruded boss. My method seems to be tedious, but if you know the problem please let me know... God bless you and your tutorials!
@@dustincasillan8730 Well look Dustin, you either do have an open sketch or more likely, your sketch is closed BUT there is an extra piece of tiny line hanging somewhere in your sketch that you have to zoom really hard to see it. the best way to find out if that is the case is to use the feature called "Repair Sketch" on the sketch tab. because an open sketch is on its own not the problem. you have my word for that
Same problem I have Solidworks 2018.
how can you have an extruded BASE and an extruded CUT on the same sketch???
this is not a beginner's tutorial as this is a more advanced as you are drawing a voice over explaining what is being done and using one method of doing this task rather than showing the 15 or more ways it can be done would truly be of value. Yes I understand this is a very complicated and detailed program but as a rank beginner it would really help to find a method of working within the suite of tools that is consistent before I start branching out to find other ways to preform a task once I know how to get around
You have a point. I will implement this in future videos and changed this one's name to Intermediate.
@@with-Aryan leave ryan alone he's getting me through CAD and not putting me to sleep like the rest of em
isn't the inner edge supposed to be 50 degrees not the outer?
what's the diff?
@@with-Aryan when I tried the exercise I dimensioned to test and there was a difference
why cant I select conyours using extrudedBoss/Base (4:06)
Can you please explain a bit more?
Download link for drawing not working
Again!?
@@with-Aryan yup
hello
how to make flatten this body
you can't! Only if you make such geometry using Sheet Metal.
hi man the link broke
courses.solidworkstutorials.net/mini-course