You only need a jack... and latex gloves, scissors, A Strong rope, screwdriver, lighter, drill with hook thing (optional) funky music and pure Magic before your eyes. This absolutely was the best pass time. Thankyou
Все эти варианты были актуальны и ими пользовались в далёкие времена, когда не было шиномонтажных мастерских на каждом километре. Ничего нового в этом нет. У всех были в багажнике монтажки и запасные камеры в дорогу. Не было безкамерных колёс.
На дисках не было кольцевого выступа внутри для бесканмерных шин, шины были выше и уже в поперечном сечении; после такого "монтажа" с помощью напильника диск можно будет выбросить из-за ржавчины
Ну, уметь-то надо всё равно, мало-ли какие приключения приключатся. Вот накачать смонтированную бескамерку на дороге, не имея компрессора- это квест еще тот! Было и такое в лихие 90-е
@@mkrp4 ну вообще, без этого кольцевого выступа ("хамп" он называется) риск есть, что при ударе покрышка "схлопнется", но я ездил и на обычных дисках, и даже "tube type" покрышки без камер ставил, ничо не схлопнулось
Some put a little yellow Arrow on the rim and also on the tire. The arrows point at each other. That way when you take the tire off to patch it, you can put it back on exactly where it used to be, and will not need a new wheel balance
My father taught me how to change tires years ago when I was a kid with a bumper jack and tire irons. Where I am tire shops and garages charge $30.00 USD to change one tire. I bought a tire changer for $50.00 USD at Harbor Freight Tools and I have saved several hundred dollars doing them myself and I have done some for friends and made some money. I didn't ask them for money. They were happy they were done cheaper. I have a balancer as well.
@mike7gerald $50.00 at Harbor Freight and it works fine. You wear off enough after a few miles anyway that somewhat makes it not matter anymore. I changed plenty of tires over the years and never balanced them and hadn't had a problem.
That's not the hard part, it's breaking the bead that's hardest, that's why I use my log splitter. Removing a tire is easy, as long as you get the bead into the drop center opposite of you, then it all works out fine.
Hi easy way l have done this in the bush is to use your car to run over the tyre and brake the bead and use tyre levers to change the tyre .cheers les from Adelaide south Australia
Hardest pert is watching this bull💩. Only reason I watched it was hoping for something clever I've not see in 30 years as an hgv truck mechanic. Sadly I was wrong.
Есть ещё вариант: поддомкрачиваем автомобиль и снимаем колесо с автомобиля, затем кладем колесо под диск или барабан снятого колеса и приспускаем домкрат, авто свом весом разбортирует колесо. Или положить на шину доску и наехать колесом, тоже помогает.
@@doktorbotving в 80годах мы и балансировали сами, правда редко, когда совсем хреновое колесо, да и на большинстве тех дорог балансировка была бесполезна.
@@arnoldalt2571I've changed a tyre myself & got it pumped up with just a foot pump, so it is possible. I usually pop it onto the rims by lighting carb cleaner but the last time I managed it with just the foot pump. I always carry the foot pump in the car, so I'll be ready for that tyre change in the desert!
Смотри выше - чел отписал, что у них ремонт колеса стоит 30 долларов, а шиномонтажный станок в их Леруа - 50. За такие деньги я бы и себе такой станок прикупил. 😉
Я живу в краю рукожопов и криворуков, на одной шиномонтаже порвали новую резину, на другой -спускает по диску два колеса( не проверили после сборки ) Так что буду сам делать раз в год - надëжнее будет, да и нервы! ☝😃
While you had the jack pushing the lip of the tire into the center ring of the tire, would be the time to pop the bead of the tire over the rim across from the jack, then the tire would come right off. 😎👍
That is outstanding, noteworthy and awesome. I hope it works like that on bigger aluminum rims and I will be trying it because I have to change a tire in the next few days that has a sidewall leak. Breaking the bead is the hardest part of it all. Getting the tire off the rim and putting it back on is easy and using dish soap makes it a breeze for slipping the tire off and on the rim.
That is actually pretty good! I use an extra rim to do the same, to scoop in between rim and bead. I mount loose rim on car and use cars weight plus floor jack to break bead. Then using tire irons to finish it off and new tire on. I will try this idea too. Rather do it myself than take up a day at a tire shop. Be careful using that file. It can snap in a second.
You would only use a jack to break the tire bead and not squash the tire down. Most people do not know why the inside of their wheels are shaped different and the reason for that is the smaller size ring makes mounting tires easy and unmounting easy.
Yes it annoys me to and video makers rotate their hands holding components and tools, we can see what they are instantly most of the time. Low self awareness is the cause.
Nice trick to break the bead. I use a different method for fitting though. A heavy duty ratchet strap around the circumference of the tire, tighten then inflate with a compressor. 👍
Sehr gute Idee, wenn man nichts anderes zur Verfügung hat 👌😎 Aber wenn man mit einer Feile arbeitet, ist etwas Vorsicht geboten, zumindest dann, wenn man kein Gefühl hat und nur Kraft ... 💪💪💪🥳😂😂😂Aber Alles in Allem 👍🎖
As a young man I removed some tires. The use of the jack was different though. I would use what we called a Handyman jack. That was the brand. It stood upright. I would put the edge of the jack against the edge of the wheel. Using basically the same principle as this one. But using it on both sides of the tire. Then removing it. It is easier to remove if you do both sides.
I rectangle of wood such as a scrap of 20mm plywood or similar piece of tough wood might prevent the feet of the jack from damaging the tire. This idea of using the force of a jack could be handy for other jobs.
Been doing this for along time but you need to start it like he did but when the gap shows pour dish soap in bead than run your jack all the way than hit the bead with a bar and hammer it will pot quick
I Have never seen this done before and now I have thanks to RUclips witnessed it done twice. There are many more demonstrations how to do this keep them comming.
It is more or less a joke ... it never will work in any way perfect! A lot of such videos ... show it only for small tires and steel rims ... and even these conditions will hardly work!!!
Someone said using a Files is not a good idea. I don’t think you could ever get that tire off or break it loose from the bead with the file it would break it would have to be a very thick file may be a pry bar, not a file that discredits the whole video.
Great ideas,great work!We almost always have everything we need to do any job if we just take the time to think. Invest in some tire irons. Never pry with a file!
Such a shame you didn't watch for another 30 seconds... I will certainly be trying his method. (Obviously with a _man's_ knot). You also missed him using a file as a tyre lever, which I'm sure would amuse you!
@@alanm8932 Как жаль что ты не живёшь рядом 😂 , я бы тебе показал как разбортировать колесо обычной лопатой. Это занимает пол минуты времени, безЕбли верёвками😂. Или обычным металлическим уголком и кувалдой бортируется грузовые колёса..
Try doing a 235 35 19 like this it's doable but strait up good luck I did 1 and I had no problem paying for the rest to be done and it ya had run flats more than luck will be neaded more like a miracle . For normal car tyres it this works ok
@GordonMilliord to break the bead I used to put the wheel under the car and jack up using the cars weight rather than the rope. If you have a flat tire you must have a car.
Bonjour, cher spectateur ! Je suis très heureux que vous ayez laissé un commentaire ! Merci, vous avez fait valoir un bon point ! Je prendrai certainement en compte vos conseils !🤩
I think this guy has watched another video on this and attempted to make a video himself. He uses a friggin file as a lever, which will score the rim, and God forbid if the file snaps and slices him. Then he doesn't even change the tyre. Hope my brains weren't ordered at the same factory.
2 different wheels used is this show, but very good Ideas, I suprise the guy didn't take advantage of the centre of the rim to remove and install the tire
Bonjour, je suis stupéfait par ta vidéo, vraiment incroyable ton astuce ! Merci pour ton savoir faire, trop génial ! Ça peux être très utile en cas de panne !!! 👍
put the wheel and tire under your vehicle jacking point; insert the jack so that its pushing down on the tire wall now turn the jack handle - it will push down on the tire wall and break the seal due to the weight of the car. Now plin the seal gap push, a peice of wood, a spanner or some wood or lever the plastic to hold the gap in place; around a 1/4 is now released. let the jack off, and do the same to next section of the tire wall; eventually the full seal will be completely broken; Remove it, and use washing up liquid to take the tyre over the rim, and full removal
You do not need a jack to break the seal just stand on the tyre and then use the cord to pull the off of the rim much quicker a tyre fitter showed me this trick way back in the 80s
Лет сорок назад, когда я в детстве помогал деду бортировать колёса, мне бы это помогло. Сейчас в этом нет смысла, теперь нужна ещё балансировка. Да и вряд ли бескамерка ужержит давление без специальной смазки 😏
Make 4 wedges cut from a bit of 2" x2" timber and use a 4Lb lump hammer, off in seconds, then use a pair of 20" tyre levers and soapy water. Mark valve position on the tyre for refitting. Simples ! Not so easy on an old rim that may be rusty though.
Если много времени и вообще это интересно заняться дома, то конечно этот вариант можно пробовать, и если это отпуск то можно с экономить время дома, а так конечно это очень трудоёмкая работа, многим будет проще отдать деньги на шиномонтаже
Ложишь колесо на землю под автомобиль, ставишь на него домкрат и упираешь в раму. Так отжимаешь борта. Это ещё в советских учебниках для шоферов написано.
Any buddy can change there tires this way!!! yes they can...but it would take them all day to do four tires...and you would still have to take your car to the shop to get your tires balance ...so the shop still have to take your wheels off the car to do that...and there's no way you are taking a low profile tire off using a this method.
Using the Jack like I said dude break the bead that's the easy part But I agree with previous comments for one using a File which is extremely brittle to pry attire with is rather stupid and then to quote somebody else yeah even if you could get it with the rope on the first bead let's see him get the whole tire off And then put it back on with that rope Not going to happen
До этого шина была поставлена на диск за кадром, разбортировали снимая на камеру. Если шина на диске стояла года 3-4, то снять её таким способом проблема. Шина прикипает к диску.
You only need a jack... and latex gloves, scissors, A Strong rope, screwdriver, lighter, drill with hook thing (optional) funky music and pure Magic before your eyes. This absolutely was the best pass time. Thankyou
Все эти варианты были актуальны и ими пользовались в далёкие времена, когда не было шиномонтажных мастерских на каждом километре. Ничего нового в этом нет. У всех были в багажнике монтажки и запасные камеры в дорогу. Не было безкамерных колёс.
На дисках не было кольцевого выступа внутри для бесканмерных шин, шины были выше и уже в поперечном сечении; после такого "монтажа" с помощью напильника диск можно будет выбросить из-за ржавчины
Ну, уметь-то надо всё равно, мало-ли какие приключения приключатся. Вот накачать смонтированную бескамерку на дороге, не имея компрессора- это квест еще тот! Было и такое в лихие 90-е
@@valeritchkalov3547 зачем бортировать колесо в дороге , если существуют жгуты для проколов ?
Полдня ковырять отверткой....дай 2 доллара на шиномонтажке! Мастера за 2 минуты сделают!
@@mkrp4 ну вообще, без этого кольцевого выступа ("хамп" он называется) риск есть, что при ударе покрышка "схлопнется", но я ездил и на обычных дисках, и даже "tube type" покрышки без камер ставил, ничо не схлопнулось
Some put a little yellow Arrow on the rim and also on the tire. The arrows point at each other. That way when you take the tire off to patch it, you can put it back on exactly where it used to be, and will not need a new wheel balance
Just put a mark on the tire where your valve stem is
Wo kann man eine Reifenfeile kaufen?
💬> It never takes that much longer to verify and then decide if any weights need installed - correctly 🤠 Yup❗ G~G.
Если прокол заделывается, или ставится камера, то балансировка колеса нарушается.
Любой специалист по балансировке колёс вам запросто докажет, что это не так.
My father taught me how to change tires years ago when I was a kid with a bumper jack and tire irons. Where I am tire shops and garages charge $30.00 USD to change one tire. I bought a tire changer for $50.00 USD at Harbor Freight Tools and I have saved several hundred dollars doing them myself and I have done some for friends and made some money. I didn't ask them for money. They were happy they were done cheaper. I have a balancer as well.
💬> 👌 Stubborn is good 🤠 Yup❗ G~G.
Balancing the tire is essential-it's no use changing it if you don't balance it afterward. How expensive was the balancer?
@mike7gerald $50.00 at Harbor Freight and it works fine. You wear off enough after a few miles anyway that somewhat makes it not matter anymore. I changed plenty of tires over the years and never balanced them and hadn't had a problem.
I'll tell you one thing breaking the bead on foreign rider mower rims with small pry bars bends the metal thus rim leaks no fun.
I read somewhere the tire balancer usually goes near where the Schrader valve is located, is that true, anyone?
Hardest part is the part he didn't do......he never actually took the tire off the rim.
And it still had to be balanced
That's not the hard part, it's breaking the bead that's hardest, that's why I use my log splitter. Removing a tire is easy, as long as you get the bead into the drop center opposite of you, then it all works out fine.
Hi easy way l have done this in the bush is to use your car to run over the tyre and brake the bead and use tyre levers to change the tyre .cheers les from Adelaide south Australia
Hardest pert is watching this bull💩.
Only reason I watched it was hoping for something clever I've not see in 30 years as an hgv truck mechanic. Sadly I was wrong.
Hardest part is listening to the narrated voice😂😂😂
Most people will try this and end up taking the tire to a shop to finish the job 😂
Есть ещё вариант: поддомкрачиваем автомобиль и снимаем колесо с автомобиля, затем кладем колесо под диск или барабан снятого колеса и приспускаем домкрат, авто свом весом разбортирует колесо. Или положить на шину доску и наехать колесом, тоже помогает.
Пробовал эти 2 способа - не помогло.
В 80х годах в основном так и разбирал.
А балансировать поедем в шиномонтаж?
@@doktorbotving в 80годах мы и балансировали сами, правда редко, когда совсем хреновое колесо, да и на большинстве тех дорог балансировка была бесполезна.
@doktorbotving Колесо "бить" начнет поедим, а так что зря время тратить. Грязь и снег налипает, камешек в протектор попадет ездим же как-то.
using a file as a pry bar is a very bad idea.
Using your mom's bran new scissors to deflate it is also a bad idea 😂
I thought that too.
😂
Files break easy. I learned the hard way.
А отвёртка что лучше? Неужели у такого специалиста нет обычной монтировочной лопатки?
Ne ho cambiati tanti di pneumatici ma non avevo mai visto quel sistema. Se ti trovi nel deserto è ideale. Complimenti.
would you have an air compressor with you in the dessert?
@@arnoldalt2571I've changed a tyre myself & got it pumped up with just a foot pump, so it is possible. I usually pop it onto the rims by lighting carb cleaner but the last time I managed it with just the foot pump.
I always carry the foot pump in the car, so I'll be ready for that tyre change in the desert!
Я так лет 40 назад делал, когда не было шиномонтажных мастерских. А теперь это дикость какая то.
Это брат происходит у них,у тех кто считает себя самыми лучшими в мире...21 век,он тут показывает,что мы раньше при помощи двух монтерововок делали😂
Смотри выше - чел отписал, что у них ремонт колеса стоит 30 долларов, а шиномонтажный станок в их Леруа - 50. За такие деньги я бы и себе такой станок прикупил. 😉
Я живу в краю рукожопов и криворуков,
на одной шиномонтаже порвали новую резину, на другой -спускает по диску два колеса( не проверили после сборки )
Так что буду сам делать раз в год - надëжнее будет, да и нервы! ☝😃
@@РомуальдАльгедрасович-ш7и все мы живем в таком краю. Так что приходистя много самому делать, но шиномонтажа еще не дошел.)))
While you had the jack pushing the lip of the tire into the center ring of the tire, would be the time to pop the bead of the tire over the rim across from the jack, then the tire would come right off. 😎👍
I change my tires too alone but with a different method, but the shown technique here seems to be simpler.❤❤❤
lubricate tire bead and it will work a whole lot easier
Washing up soap.
That is outstanding, noteworthy and awesome. I hope it works like that on bigger aluminum rims and I will be trying it because I have to change a tire in the next few days that has a sidewall leak. Breaking the bead is the hardest part of it all. Getting the tire off the rim and putting it back on is easy and using dish soap makes it a breeze for slipping the tire off and on the rim.
Hello, dear viewer! It's great that you shared your opinion - I will definitely wait for your SMS, did you manage to do this trick - write to me🤩
This is how my dad taught me too change tire from rim some 60 years ago! Thanks for sharing!
Ne verjamem prvič videno kaj takšnega zakaj niste objavili
Wow! Kiedy przylożyłem czerwony sznurek do oponu, ona sama spadła z felgi... to najszybsza wymiana opny w moim życiu... dziękuję.
I missed the bit where the tyre came off the wheel and the bit where the new tyre went on.
That and the part where you inflate the tire with the jack lol
The tyre centre wouldn't let him video that part.
Mert ez egy Dewalt akkus fúrógép bemutató videó
This video is missing so much it's a joke!
That's the easy part. Breaking the bead is the hard part.
That is actually pretty good! I use an extra rim to do the same, to scoop in between rim and bead. I mount loose rim on car and use cars weight plus floor jack to break bead. Then using tire irons to finish it off and new tire on. I will try this idea too. Rather do it myself than take up a day at a tire shop. Be careful using that file. It can snap in a second.
You would only use a jack to break the tire bead and not squash the tire down. Most people do not know why the inside of their wheels are shaped different and the reason for that is the smaller size ring makes mounting tires easy and unmounting easy.
Thank you. It took for decades to know the simple way as you taught
Is that sarcasm or did you really like it?
The only person in the world that is not completely irritated by constant background music is the person making the music.
Yes it annoys me to and video makers rotate their hands holding components and tools, we can see what they are instantly most of the time. Low self awareness is the cause.
I must’ve had my sound off, did not hear any background music.
Would have been a ton better without the annoying music … maybe just a voice step by step or even just a mime version 😃
He's irritated by it too
Nice trick to break the bead. I use a different method for fitting though. A heavy duty ratchet strap around the circumference of the tire, tighten then inflate with a compressor. 👍
Классно.. Быстро и не дорого. Спасибо. Попробую этот приём. Из России. Сибирь.
In one minute the title say and the video last 7 minutes 🤣😅😂
And he only took the tire off.......
Sehr gute Idee, wenn man nichts anderes zur Verfügung hat 👌😎 Aber wenn man mit einer Feile arbeitet, ist etwas Vorsicht geboten, zumindest dann, wenn man kein Gefühl hat und nur Kraft ... 💪💪💪🥳😂😂😂Aber Alles in Allem 👍🎖
That file you use as a tire lever is likely to snap
yes , files are too expensive to pry with
Crowbar!
They are pretty brittle as well when you put force on them like that
@@michaelhemric5228 Listen to these guys!
need to know what metal made
As a young man I removed some tires. The use of the jack was different though. I would use what we called a Handyman jack. That was the brand. It stood upright. I would put the edge of the jack against the edge of the wheel. Using basically the same principle as this one. But using it on both sides of the tire. Then removing it. It is easier to remove if you do both sides.
Always nice till it slipped and got a whack on the shin
@tonyteel True. It probably could have happened. But never did.
Excelente tutorial. Muchas gracias. Saludos desde España.
I rectangle of wood such as a scrap of 20mm plywood or similar piece of tough wood might prevent the feet of the jack from damaging the tire. This idea of using the force of a jack could be handy for other jobs.
Been doing this for along time but you need to start it like he did but when the gap shows pour dish soap in bead than run your jack all the way than hit the bead with a bar and hammer it will pot quick
I Have never seen this done before and now I have thanks to RUclips witnessed it done twice. There are many more demonstrations how to do this keep them comming.
Wow, this looks so quick and easy! Who needs a tire shop when you have this trick?
People who's only tool they have ever used is a fork.
It is more or less a joke ... it never will work in any way perfect! A lot of such videos ... show it only for small tires and steel rims ... and even these conditions will hardly work!!!
Someone said using a Files is not a good idea. I don’t think you could ever get that tire off or break it loose from the bead with the file it would break it would have to be a very thick file may be a pry bar, not a file that discredits the whole video.
Great ideas,great work!We almost always have everything we need to do any job if we just take the time to think. Invest in some tire irons. Never pry with a file!
We used to use a bumper jack to break the tire bead to remove tires about 45 years ago when I was more broke than I am now, LOL.
Посмотрев как специалист завязал "бабий" узел на верёвке , понял бессмысленность дальнейшего видео....
Such a shame you didn't watch for another 30 seconds...
I will certainly be trying his method. (Obviously with a _man's_ knot).
You also missed him using a file as a tyre lever, which I'm sure would amuse you!
@@alanm8932 Как жаль что ты не живёшь рядом 😂 , я бы тебе показал как разбортировать колесо обычной лопатой. Это занимает пол минуты времени, безЕбли верёвками😂.
Или обычным металлическим уголком и кувалдой бортируется грузовые колёса..
@@user-fk6ku3hy5f Да просто киркой и ломом отжать . Видео англичанина умом не блестит.
Без проблем сами делали. Ничего нового
Try doing a 235 35 19 like this it's doable but strait up good luck I did 1 and I had no problem paying for the rest to be done and it ya had run flats more than luck will be neaded more like a miracle . For normal car tyres it this works ok
Пока разблокировал, диск поменял цвет😂
Да ещё и отвёртку поменял на без ручки.
A minute ? Check the length of the video and actually it’s a very clumbsy way in my opinion
Do you have a better way? I'm waiting.
@GordonMilliord to break the bead I used to put the wheel under the car and jack up using the cars weight rather than the rope. If you have a flat tire you must have a car.
Дурью мается.
Put the tire between your ass cheeks and fart.😂
Bonjour,
Avec un peu de savon pour faciliter le glissement pour sortir, comme pour rentrer le pneu !
Merci pour votre partage.😊
Bonjour, cher spectateur ! Je suis très heureux que vous ayez laissé un commentaire ! Merci, vous avez fait valoir un bon point ! Je prendrai certainement en compte vos conseils !🤩
@@FixItFast1
Merci beaucoup pour votre attention.
Bien à vous
Всё гениальное - просто 🤙
Если шине 15 лет, то она так прикипает к диску, что на шиномонтажке снимают долго.
На видео новая и мягкая шина, а с грубой помучаешься.
3307 - как бы не совсем новая :)
@@Gary-G31как бы судя по остатку протектора - не совсем старая😂😂😂
I think this guy has watched another video on this and attempted to make a video himself. He uses a friggin file as a lever, which will score the rim, and God forbid if the file snaps and slices him.
Then he doesn't even change the tyre. Hope my brains weren't ordered at the same factory.
"Such an ingenious technique! Changing a tire in just a minute with this method is absolutely brilliant!"
Stupide idiots😂😂😂😂
En une minute? J'ai compté plus de 7 minutes dans cette vidéo!
sarcasm. at its finest 🤣🤣🤣
How do you balance it?
Chłopie! Co ty wyprawiasz? Odpuść. Pilnikiem po feldze? Nawet po wódce bym tego nie wymyślił. 🤣
Я всё ждал, когда же он разожжёт костер и начнёт танец с бубном вокруг него!
😂❤😂🎉😅😊
After jacking the tire away from the rim, those cracks in the tire 🛞 means it’s tine for NEWTires
All you need is a jack. And rope.And scissors. And a drill😂😂😂
главное то, что в машине всегда должен быть напильник и шуруповерт! Без них никак!😆😆😆
2 different wheels used is this show, but very good Ideas, I suprise the guy didn't take advantage of the centre of the rim to remove and install the tire
Yes, my friend, you are very attentive! Everything is as you said, but everything is done at home
Bonjour, je suis stupéfait par ta vidéo, vraiment incroyable ton astuce ! Merci pour ton savoir faire, trop génial ! Ça peux être très utile en cas de panne !!! 👍
Don’t kill your self and look after your back . Health is everything, money is not everything
Если у меня... За пять шесть лет колесо прокалываю.. Оно так закипит........ Никакими донкраиами...только ведешкой отмачивал и кувалдой....
Never use a file as a lever! It is brittle and will snap, possibly causing serious injury.
@@brucerobson8767 The entire video is BS; this tire had been removed before the video
put the wheel and tire under your vehicle jacking point; insert the jack so that its pushing down on the tire wall
now turn the jack handle - it will push down on the tire wall and break the seal due to the weight of the car. Now plin the seal gap push, a peice of wood, a spanner or some wood or lever the plastic to hold the gap in place; around a 1/4 is now released.
let the jack off, and do the same to next section of the tire wall; eventually the full seal will be completely broken; Remove it, and use washing up liquid to take the tyre over the rim, and full removal
Used to do this back in the 80s WITHOUT gloves!
Somebody please get this man a valve stem remover
no ... that's the advance notice - in the next video the tire change will only be done with scissors!
You do not need a jack to break the seal just stand on the tyre and then use the cord to pull the off of the rim much quicker a tyre fitter showed me this trick way back in the 80s
Mission accomplished. I like saving money, but some things just aren't worth the trouble. I'll let the tire shop do it.
used a jack and the porch It was similar to this method. I I have changed my lawn mower and Tractor tires
Лет сорок назад, когда я в детстве помогал деду бортировать колёса, мне бы это помогло. Сейчас в этом нет смысла, теперь нужна ещё балансировка. Да и вряд ли бескамерка ужержит давление без специальной смазки 😏
Так бескамерные покрышки превращают в камерные👍
I also used a car jack, but rather than use a rope, I put the jack on the tire as above, then just "jacked up" under the cars tow-bar.
Yep. Many times. I do it for the musel power
Лежу смотрю и думаю ,как над собой поиздеватся
It works but if you pinch the tread part too much you can get an air bubble and the tire can blow while driving.
Its been over 100 years..We meed to reinvent tyres that are easier to fit and dismantle
You should lubricate the edge of the rubber tire with soapy water to make it slip off easier.
Surprised the file didn't break in half. Try a tire iron or flat piece of non-hardened steel. A valve core remover is a good investment as well.
Few people know the difference between a square knot and a granny knot. He tied a granny knot. Granny knots are not as strong.
My son just users a medium bench vice ,and it works both do ,,.
How is that? Is it easy for him? I would like to see
I wish I had seen this a long time ago before I purchased a bead breaking tool lol
Make 4 wedges cut from a bit of 2" x2" timber and use a 4Lb lump hammer, off in seconds, then use a pair of 20" tyre levers and soapy water. Mark valve position on the tyre for refitting. Simples ! Not so easy on an old rim that may be rusty though.
that's a good point you must scrape old rust away around inside rim bead and use rim sealer too.
The haters saying he is ruining the tire. The tire is already trash.
Шиномонтаж стоит 1€
А тут мороки на день 😹
Good video. Learn somethi.g . And do it fast.. back in the day yes did take tire but took me sevetal hours before you tube. 😅😅😅
Vielleicht muss man die Innenseite des Reifens auch noch abdrücken, damit man den Reifen richtig hochziehen kann !
Absolut wahr! Dieser Trick funktioniert in beide Richtungen! Danke für deinen Kommentar, mein Freund!❤️
Mom’s been looking for those scissors all day
VERY GOOD INGENUITY, FRIEND, TO GET OUT OF A TROUBLE. GREETINGS
Если много времени и вообще это интересно заняться дома, то конечно этот вариант можно пробовать, и если это отпуск то можно с экономить время дома, а так конечно это очень трудоёмкая работа, многим будет проще отдать деньги на шиномонтаже
Good example of how to make a file a multi use tool. Kind of like chisels. They make excellent screw drivers. Right?
This trick is perfect for DIY enthusiasts or those looking to change tyres faster than an F1 team
This is really true, my friend! Thanks for your comment! Tell me if you managed to repeat this trick!🤗
Дело было вечером - делать было нечего, вот и заняли себя...
Проще заплатить 400 руб, сидеть пить кофе а профессионал сделает намного всё быстрее и качественнее
Тоже так делал колесо, целый час мучался грязный потный , поехал на шиномонтаж и с радостью отдал 100 рублей за это чудо
I will give it a try.
Fantastic too GOOD BRAIN WORK
FANTASTIC FANTASTIC FANTASTIC
TOO GOOD
THANK YOU VERY MUCH MUCH FOR THE TEACHING
Madly praaaad for your such laudatory comment! Thank you friend! hugged
Главное балансировка колеса, а поменять шину на диске не проблема.
I was taught using a board and a heavy vehicle to prop board on tire and drive on board
Ложишь колесо на землю под автомобиль, ставишь на него домкрат и упираешь в раму. Так отжимаешь борта. Это ещё в советских учебниках для шоферов написано.
я пятками отрывал за пару сек затем приблуду кочергу-плечо изготовил и еще стало проще
Very good 🤝
Now after remove how you put the new tire on ???
Thanks
Если 15 лет шине, сразу в утиль!
Nothing like the famous New York minute.
Get a harborfreight tire changer for $60 bucks, they work like a charm
Super idea.very simple. cheap and best method
Any buddy can change there tires this way!!! yes they can...but it would take them all day to do four tires...and you would still have to take your car to the shop to get your tires balance ...so the shop still have to take your wheels off the car to do that...and there's no way you are taking a low profile tire off using a this method.
Using the Jack like I said dude break the bead that's the easy part But I agree with previous comments for one using a File which is extremely brittle to pry attire with is rather stupid and then to quote somebody else yeah even if you could get it with the rope on the first bead let's see him get the whole tire off And then put it back on with that rope Not going to happen
До этого шина была поставлена на диск за кадром, разбортировали снимая на камеру. Если шина на диске стояла года 3-4, то снять её таким способом проблема. Шина прикипает к диску.
Совершенно точно!
söktün bir dert, taktın bir dert.