Hello! this definitely works up to this date april 2023. It worked for me, I got 90 because I made some small mistakes but I'm sure that if people practice on this network they'll get 100. Thanks for this video!
Thank you for your guidance I hit 87%. 3% lost because I missed a description the other 10% is because I did not put the DNS server address into the ip settings of the PCs which you have not done either in this video. So guys, remember to put the DNS ip into the DNS on the PCs.
I'm having sever difficulty pinging Pc-A to DNS Server. The Ip address is accurate but the ping always requests time outs. Is there something i'm missing? I've done evrything up to the 47:30 mark and then everything falls apart after that. PC-A can't connect to DNs Server. It fails 100% of the time.
Inglese Hello, why does it give me the following error if I connect the Straight Through cable to the G/0/0/2 port of Router R1: the cable cannot be connected to that port
I got a 100, but I had to change two things. I used a crossover-cable instead of a straight though cable for the router to router connection. Also, I added the DNS server address when configuring the PC's
Are the switches supposed to be version 15 by default in the provided pkt file? Trying to check to see if my config works and unlike the video, it seems like the version is already 15 and not 12
El archivo pkt que compartes en tu enlace, cuando se abre con el Packet Tracer no muestra el mismo arreglo del vídeo (racks, cables, etc) Tienes el archivo que muestre lo mismo que en el vídeo. Saludos
@@romeroc24 gracias, efectivamente en el modo físico pude encontrar la distribución con los racks. Una pregunta ¿ hay alguna forma de mover la disposición de las mesas y el rack, lo intento pero no encuentro la forma?
@@romeroc24 gracias por tu gentil respuesta. Es que al ir al modo físico la disposición de las mesas y el rack es diferente a como sale en tu vídeo y quiero arreglar eso. Saludos
Really thanks fot this video! I got 97% of this exam. However, the video does not show the DNS server address configuration in the ip address configuration. I got three points deducted for this reason.
Hola, al tratar de conectar la interface g0/0/1 en el router me sale un mensaje que dice “el cable no puede ser conectado con ese puerto” me pas a igual con los dos routers. Sabes por que es este error? Gracias por la ayuda
Excellent work!!, You have explained the exercise very well!!!, on other hand, I have some questions, firstly, I wonder if when I change the HELLO's time in OSPF configuration, must you change the dead's times too? I understand that the dead’s time must be four times greater than hello's time. The other question is why use the ip address 64.100.1.7 for NAT in a 64.200.1.0/29 network, It isn’t a 64.100.1.7 the broadcast address por this network? Thanks very much again!!!
acabo de descargar tu archvio pk pero me sale que es incompatible que version de packet usas yo tengo la 8..0 o puedes compartrla en esa version por favor gracias
Could you send me this packet tracer activity to practice Christian? Thank you for all your hard work and helping me and others through our studies in networkmanagement, you've been a great help for two and a half years
Hello please I’m experiencing a problem, I tried pinging the DNS server and I got a reply saying “reply from 192.168.1.1: Destination Host Unreachable.” Please how do I resolve this? (192.168.1.1 is the gateway address of the pc I was pinging from)
If you're using the file Christian provided, make sure you configure the IP address and gateway on the DNS server. In the exam it might be done for you but not in the provided file
Hello! this definitely works up to this date april 2023. It worked for me, I got 90 because I made some small mistakes but I'm sure that if people practice on this network they'll get 100.
Thanks for this video!
Glad it helped! Thank you for all your support
@@romeroc24 do you the pdf or the documentation for the file . i want to practice it first before actually taking it
@@Lynexen03 the file on video's description
Thank you for your guidance I hit 87%. 3% lost because I missed a description the other 10% is because I did not put the DNS server address into the ip settings of the PCs which you have not done either in this video. So guys, remember to put the DNS ip into the DNS on the PCs.
very good observation, thank you
Thank you a lot. A got 97%, You have done a great job and help a lot!!!🙌👏👏👏👏
Great job! I appreciate
Thanks alot Christian! You really help me understand how to configure in an orderly manner.
I appreciate your comment, thank you
Hello, Sir
Many Thanks for this video
it's very good job
Many Thanks to share your work with us
Regards
I appreciate your motivation , I really need this
You are the best!!!! Thank you.
thank you my friend
The pkt file doesn't resemble this video instruction at all. Am I missing something? Maybe it's a bad link?
send me the name of the activity so I will send you the link for that activity
I'm having sever difficulty pinging Pc-A to DNS Server. The Ip address is accurate but the ping always requests time outs. Is there something i'm missing? I've done evrything up to the 47:30 mark and then everything falls apart after that. PC-A can't connect to DNs Server. It fails 100% of the time.
Try to ping from DNS server to other devices and PC-A to other devices, you will find the solution, after that the only way is to try again.
@@romeroc24figured it out. Thanks
@@nathanmonette2243 nice
Inglese
Hello, why does it give me the following error if I connect the Straight Through cable to the G/0/0/2 port of Router R1: the cable cannot be connected to that port
on physical tab you can remove the g0/0/2 module then place it again and will work
I think I missed how you switched on the switches Sir, I'm trying to repeat the video but I can't seem to find how you switched them on. Please
Drag the console cable from a device to another device, close terminal on the PC and open again.
I got a 100, but I had to change two things. I used a crossover-cable instead of a straight though cable for the router to router connection. Also, I added the DNS server address when configuring the PC's
Thank you my friend, I appreciate it
38:28 How did you know that g0/0/2 is the passive interface?
because, you don't have a OSPF neighbor (router) on that side
@@romeroc24 So any interface that is not connected to a router is passive?
@@prassanak3601 passive if does not have a neighbor on layer 3 of the osi model
@@romeroc24 Thank you
Please how can we go into the physical topology to put each device where it belongs. Thank you for your hard work
this video shows that, thank you for all your support
Are the switches supposed to be version 15 by default in the provided pkt file? Trying to check to see if my config works and unlike the video, it seems like the version is already 15 and not 12
you can use the file I shared on video's description, using "show version" command to verufy
The packet tracer file in the description is different from the one in the video. Could you please send it to me if possible?
Download the packet tracer file from the description of the video
Hey, when I'm trying to ping the dns server from pc-a it says "destination host unreachable". What could I have missed?
please look every detail in video, review ip configuration, routing, etc
The Pkt file you shared does not have any instructions Sir, please share the one that we can practice on please Sir.
There is a .pdf file with instructions, in the description of the video
El archivo pkt que compartes en tu enlace, cuando se abre con el Packet Tracer no muestra el mismo arreglo del vídeo (racks, cables, etc)
Tienes el archivo que muestre lo mismo que en el vídeo. Saludos
tienes que entrar al modo físico para poder verlo como en el video
@@romeroc24 gracias, efectivamente en el modo físico pude encontrar la distribución con los racks. Una pregunta ¿ hay alguna forma de mover la disposición de las mesas y el rack, lo intento pero no encuentro la forma?
@@EwingJesusFallaArevalo si es posible hacerlo, se elimina la mesa y luego se agrega una nueva
@@romeroc24 gracias por tu gentil respuesta. Es que al ir al modo físico la disposición de las mesas y el rack es diferente a como sale en tu vídeo y quiero arreglar eso. Saludos
@@EwingJesusFallaArevalo Esta bien si quieres modificar eso
Great work! How do you get into rommon mode in PT?
Thank you, try this video of real device and try on PT to view if is possible ruclips.net/video/xbO0-j5ellA/видео.html
hello, Christian thank you for this video, I downloaded your PKT file and practiced. But how do I know how much I scored in practice?
thank you, you can't see the score on my file but you can verify and test the connectivity and configurations
On your channel, there are multiple different versions of the ENSA final skills exam. Which one should we refer to? My exam is next week.
The names of the devices may change but the addressing is the same
Después de ingresar los comandos de OSPF, no hizo la adyacencia y ya no supe cómo solucionarlo
hay que tener cuidado en las máscaras wildcard y en los números de red, por eso puede fallar
Really thanks fot this video! I got 97% of this exam. However, the video does not show the DNS server address configuration in the ip address configuration. I got three points deducted for this reason.
Glad it helped, I will review that missing item
Hola, al tratar de conectar la interface g0/0/1 en el router me sale un mensaje que dice “el cable no puede ser conectado con ese puerto” me pas a igual con los dos routers. Sabes por que es este error? Gracias por la ayuda
debes usar un cable correcto, talvez estas usando un cable que no es el straight through
Excellent work!!, You have explained the exercise very well!!!, on other hand, I have some questions, firstly, I wonder if when I change the HELLO's time in OSPF configuration, must you change the dead's times too? I understand that the dead’s time must be four times greater than hello's time. The other question is why use the ip address 64.100.1.7 for NAT in a 64.200.1.0/29 network, It isn’t a 64.100.1.7 the broadcast address por this network?
Thanks very much again!!!
Yes you can change the dead time to any value. 64.100.1.7 is placed on a different network fo 64.200.1.0/29 (100 and 200)
thank you for all your support
acabo de descargar tu archvio pk pero me sale que es incompatible que version de packet usas yo tengo la 8..0 o puedes compartrla en esa version por favor gracias
de mi blog puedes descargar la más reciente en la sección CCNAv7 techemergente.blogspot.com
@@romeroc24 muchas gracias
What's the difference between this and your previous video for ptsa v 7.2 ?
I don't know exactly what is the previous video, but anyway this is a better solution for any previous video
Thank you so much bro ,your explanation is easy to understand
Glad it helped. Thank you for all your support
in your file G0/0/02 does not connect both routers same issue
please if you can delete the cable then place it again
Tried many times I am using packet tracer 8.2.1 latest version
@@brilliant866 also you can verifiy al connections on logical mode
@@romeroc24 yes sir from logical side also same issue
@@brilliant866 you can save changes and reaload the router
Could you send me this packet tracer activity to practice Christian?
Thank you for all your hard work and helping me and others through our studies in networkmanagement, you've been a great help for two and a half years
Hello, thank you for all your support, the file is shared on the description of the video
gran video, sigue funcionando! :)
GRacias por todo tu apoyo amigo
Can we download this test with no config and with the completion percentage counting from 0%?
The description of the video has a link to download the file
se puede descargar ese packet tracer para usarlo como practica ,algun link?
el enlace en la descripción del video
Hello sir, Why i can't command in PC-B?
This video will help to activate Desktop tab ruclips.net/video/oqnUVcRY7lU/видео.html
gracias rey explicas mejor que carlos tqm
GRacias por todo tu apoyo, lo aprecio mucho
Is doing this compulsory for the voucher?
what the version of packet tracer? you use?
8.01, the recent version of PT is 8.10 but you can install both version on your PC
what is the version of packet tracer pls
use packet tracer 8.01. or 8.1
Hello please I’m experiencing a problem, I tried pinging the DNS server and I got a reply saying “reply from 192.168.1.1: Destination Host Unreachable.” Please how do I resolve this? (192.168.1.1 is the gateway address of the pc I was pinging from)
Help please
@@danny-tk6sy there is a routing error or IP miss configured, please review all again
If you're using the file Christian provided, make sure you configure the IP address and gateway on the DNS server. In the exam it might be done for you but not in the provided file
Thank you sir.. very helpful ^_^
Most welcome! I appreciate it
¿Dónde aprendiste los conceptos de redes y cómo aplicarlos en packet tracer?
usé libros y el material de netacad, puedes contactarme a redes sociales mostradas en 00:03
@@romeroc24 Gracias, lo tendré en cuenta, quisiera tener guía para mejorar. Saludos desde Ecuador!
@@Angelo-vb6dg ok
thanks you, helped me
Thank you my friend!
Thank you boss!
Welcome! Thank you for all your support my friend!!
thankyou, it's help a lot..
You're welcome!
Does this work for April 2023?
Yes, absolutely, thank you
What's the score for this, romero?
More than 90% for sure
How much score percentase ?
more than 90% for sure
Ccna 3?
yes, here more videos about ruclips.net/p/PLdtRZtGMukf7U2GLzLxRWUQyCsNsua05g
this one v7
yes version 7
Tugas saya kok ribet pak bu dosen
These video may help you to understand more, I can send you a playlist to learn from the scratch