Thank you for the wiring diagrams! You're the only source I've found anywhere to put them online without having to pay to sign up for TIS. As a matter of principle I hate manufacturers not publishing their wiring diagrams, so I prefer not to reward them for it with money.
I am very glad to have found this video, but I'm too old now to go to all this kind of work. I like my original car stereo just fine, but the display likes to go extremely bright when the car first starts most of the time. It's especially annoying at night. If you drive for a while it fixes itself. It appears to be related to the humidity. Anyway, I'm looking into replacement options and this was excellent information. Thanks
I don't comment on videos much but had to for you! Thanks for the video man. Installed mine and it works great! Thank you to the other comments, they've helped a lot too!
Hello I appreciate your video install I have the 2012 JBL system without nav and wanted to make sure the tyto-01 harness is the correct one Amazon says it will not fit and none of the comments discuss using the harness on any of the third gen cars, Thanks
I have a 3rd gen 2010 prius with JBL w/o Nav, and Amazon also says it will not fit on my car. I believe it should work for you car. You can attempt to return it if it does not.
We’ll done man! Looks great! I think my bluetooth is starting to fail or something weird. I’d love to get a legit head unit in here. To bad gotta buy so many dang adapters and what not. Probably worth it though. I want an amp too
Anyone have any info for a 2001 Lexus gs300 I have tried messing with the blue and blue/white wires but idk why it doesn’t work the sound is there but barely audible and the sound sounds distorted raspy?
I would pay you to do this for me if you were based in London, UK. I am not too confident to partake in this job. Some say chinese car units are bad. 😅 thanks for sharing.
Colin, a few questions: 1- I do not have the JBL package. Do I still need to purchase the amp module/harness? How do I connect the speakers to the pioneer unit? 2- reverse gear signal wire- where did you source the wire for this? Did you tap into reverse lights and use this wire for the rear camera and to connect to pioneer unit? 3- parking brake wire- were you able to use the video functionality on unit while driving without connecting this wire to anything? I read in other comments to connect that wire to any ground source to bypass the parking limiter. Wondering if I need to ground it or can leave it hanging. 4- can you tell me which rear camera you installed with this unit? I was reading the voltage on certain cameras can be an issue Thanks!
Hello Shafi, 1. You do not need the JBL amp package. You can purchase this harness, and connect the wiring from the back of the stereo to harness. This will then connect to the plugs behind the dash. amzn.to/2QYrni4 2. I had a wire tapped into the (I believe red/blue, not the white) wire from the right rear reverse light bulb to power the backup camera when in reverse. I had to supply 12v of power to the unit when reversing as well. See the middle of this link (pin 29) for where to tap into. You can also run a very long wire from the reverse light into the back of the unit. priuschat.com/threads/tapping-into-reverse-light-for-backup-camera-help-please.190377/ 3. I actually could not play videos because I left the wire hanging. It will need to be grounded, or connected to something like this. amzn.to/3fGAv5t 4. I currently have this backup cam on amzn.to/3dB15tU
This is a very informative video but what about the 2010 Toyota Prius is that do not have a JBL system I'm not finding anything anywhere on how to hook up a new stereo on a non JBL system
Awesome video but unfortunately it won't work for my 2010 Prius non JBL. I do know the JBL system and the stock system uses different adapters I believe
@@Senorlatulla The principle should be the same, but I'm not sure what the non JBL wiring looks like. Theoretically it would be easier, and you may only need the standard stereo harness and Metra Axxess ASWC-1 Universal Steering Wheel Control Interface (if you want to use that). You would NOT need the Metra TYTO-01 JBL Amplifier Interface Harness. There are screenshots of the prius wiring diagrams that start at 5:10 if you are inclined to read through that, and match the wires on the stereo harness and steering wheel control interface. Let me know if it works for you. Best Buy should also be able to install a stereo for you if you don't want to do it yourself. Good luck!
Hi Colin, Thank you for this video! I have one issue/question. After completing my install i now have a message that says “CHECK HYBRID SYSTEM” I’m assuming it’s the radio parking brake cause I left it unplug. The link you provided for the bypass is no longer available. Would you happen to know where i can purchase one?
Hello, I think I had that same issue because I turned the car on without having everything including the park switch plugged back in. I read that you can plug all the connectors, and turn the car on/off 3x and it'll reset. I searched "Pioneer parking bypass" and found this product. If that doesn't work then you can search google for one. amzn.to/46wZcZ2
@@ColinLeungokay. Because it will be great to reuse what it has without having addition hardware and make the other redundant. Thank you for the feedback. Btw, do you know where to download an installation manual of Prius 2011? I would like to have some guidance in open up some interior covers
@@porkyong I do not. Try searching for a 2011 Prius Service Manual online. There may be a fee to obtain it. The factory manual is on Toyota's website but is not in great detail for taking the car apart. www.toyota.com/t3Portal/document/om-s/OM47685U/pdf/OM47685U.pdf
I have to do this because my stock stereo can only access the radio. Entune and any bluetooth/aux option is totally inaccessable even after utility resets. If I had access to aux I wouldn't care so much but I miss listening to my music on my stereo.
did ur car catch fire u didnt use any conectors or solder like vid said dont twist bare wirws n tape them ice seen 2 cars burn cause of twist wire n tape hack job
Hello, the connections were soldered with heat shrink tube placed on after. The blue tape was used temporarily to test everything before soldering. I appreciate your concern! ruclips.net/video/pEERmGfjN_M/видео.html
Hoping you might see and be able to help, if I do this on a non jbl non nav and use ax toy28swc adapter with aswc1 will I retain the trip button on steering controls?
Hey Colin this is an awesome video I found a lot of answers here. but im struggleling because i dont have audio and i don’t know why. i did conect the blue/white wire to the red one as you did but still no audio. any advice?
Hello Daniel, it has been a while since I did this install and have since sold the vehicle. Do you have the non-navigation Prius with the JBL speakers? I had to buy the Metra Axxess ASWC-1 Universal Steering Wheel Control Interface and Metra TYTO-01 JBL Amplifier Interface Harness, and connected them exactly as they were shown starting at 6:24. If you also have the same setup, and installed it identically to how I did then theoretically it should work. I'm not too familiar with setups for the navigation, or non JBL system, but did provide photos of the wiring diagram starting at 4:58 that you can reference.
@@ColinLeung actually my car is a 2012 FJ cruiser with the same JBL system and thanks to your video I figured out how to do it. I have audio now but I have another issue, when I turn my car off them I lose my audio again for about 5 to 8 hours. This is so weird
@@daniellacruz5666 That is weird. I'm glad you got your audio back. Perhaps you can bring it into a car audio installer to troubleshoot if you can't figure it out
This is what I've been looking for myself (except for 2011), mainly because the stock stereo doesn't allow Bluetooth controls. I haven't looked at the harness for a Prius 3 screen stereo unit yet, but I am presuming that if I buy one for the same year, it should work with minimum altering. If not, I'm curious what that face plate for the stereo is called.
Great video! Thank you. Do u know if i’ll need the steering wheel control adapter if i purchased the new 1500 dex model that says its steering wheel control ready?
Thanks. I'm not too familiar with the new model, but I believe you still need to purchase the steering wheel control adapter because it's specific for the prius. I could be wrong though
I have a 2012. I don’t see JBL logo anywhere on radio or speaker. I have entune with navigation and steering controls. How do I know if my unit is JBL or not? Also, what pre-built connectors to connect to parking switch and antenna.
Hello BR31, I think my car has JBL logos on the plastic speaker covers on the door, and I have an amp under the passenger seat. In this video the JBL logo on the bottom left of the stereo display. You may not have a JBL sound system if you don't see any of those indicators. Unfortunately I was only familiar with the hookup on my car, and do not know where the connectors are for a nav/non JBL. I copied screenshots of the wiring diagram i the middle of my video, which may or may not be helpful. ruclips.net/video/WnY2F1iE0x8/видео.html
I don’t have Navi or jbl but I have a touchscreen unit. Switching to an android hu but I don’t see a plug with the pink(pin 6) red(pin 7) or green(pin 8) for the install of the ASWC-1 for the steering wheel control. Any idea what wire am I supposed to tap into? I have a 2013 Prius 2 with touchscreen hu. Thanks in advance
Hello Wa, I'm not familiar with the other setups besides what was on my car. I did include pictures of the wiring diagrams starting at 5:10. Perhaps you can look through those and find the wiring for your car. Thanks!
@@ColinLeung thanks for the response. I guess my Prius have a different plug than yours. I was messing with the features on the access website. I shows I need the AXSWC which looks identical to the ASWC-1.
@@ColinLeung so when you tap the black, red, green/orange, and black/green wire of the acxess steering wheel control interface to the plug, do that plug plugs back into the head unit it it just sits there?
Thanks for this. Do the original mpg tracking and steering wheel controls still work with this new head unit? If not, which head units retain these capabilities (I really like tracking my mpg and also being able to control music from the steering wheel without taking hands off the wheel). Thanks!
Thanks. I installed the rear camera without recording the process. I pulled off the trunk plastic, disconnected one of the license plate lights, fed the camera power and video cable through, tapped the positive power wire into one of the rear tail light wires, grounded the negative cable to a random bolt close by, ran a long video cable to the AV unit, and reinstalled everything. I hope this helps.
@@grimes9339 The hardest part was figuring out what to buy, and how to wire it. If you follow everything in the video step by step you may be able to finish in 3 hours. If I were to do it again, I could probably finish it in 1hr, or half the time if I wire capped the connections (which isn't recommended).
Hello great video!! Do you it’s gonna work on my car it’s a Toyota RAV4 2009 with JBL system sound from factory? I want to install ATOTO radio , please help me 🙏🏼
Hi, got a quick question, I've got a import prius in the UK and its the Sat nav one and all the writing is in Japanese, is the process the same? Thank you.
Hello Mr A Hussain, I have only dealt with the US model, so I don't know if it's the same. Sorry. Hopefully someone else can chime in, or you can try taking the dash apart to see if the wiring is the same.
It might be different for non JBL and non nav systems. Which one do you have? I put a wiring diagram in the middle of the video that may help identify the steering wheel control wires for different setups.
I don't think it did. I think pressing the call button activated Siri when my iphone was connected. I suppose you could tell her to call someone that way.
Colin thanks for posting this. Its a great reference for hooking up all the extras (Ie SW controls). Do you use an aftermarket amp? If so, where did you install? I have mine in the trunk case but getting some static and I think it may be too close to the hybrid battery. Just curious about your setup! Thx!
Hi, I have a Toyota Prius 2010 with JBL, but so far I still haven't found the adapter that fits in my new stereo. From the link you left available here, on amazon it says it only works on cars from 2005 to 2007. Does it really work on the prius 2010?
Do i need that amplifier connection? I hv WM-TY1 harness. Unless the 2010 prius has it built in. Oh and dont care about steering controls. Dont use them.
does the steering wheel trip function and climate control still work? Bestbuy installed mine but lost climate control and trip info on my steering wheel
@@ColinLeung Did you have to use a jumper on the oem wiring harness? The climate control buttons on the steering wheel uses a OEM harness that isnt used in the install of a radio
@@xpocad I did not use any jumpers. Only the two modules mentioned in the video, and spliced 3 wires for the audio controls. The climate controls work on my steering wheel, and I don't think I touched any of those wires. They may be connected to the heating control unit.
Does the climate control on the steering wheel also thru this? Bestbuy installed a new radio but I didn’t get the volume control and they say I should still have climate control but now I lost climate control too
I do not believe it does. My climate controls are on the right of the steering wheel, and continue to work. My audio controls are on the left of the steering wheel.
@@macjusss Do you have a JBL amp and stock stereo without Navigation, and are installing an aftermarket stereo? I'm only familiar with that setup. I'd charge $50/hr. It might take 2hrs, but it depends on what needs to be done.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
Thank you for the wiring diagrams! You're the only source I've found anywhere to put them online without having to pay to sign up for TIS. As a matter of principle I hate manufacturers not publishing their wiring diagrams, so I prefer not to reward them for it with money.
You're welcome. I found the information on the forums, and figured it was needed for anyone attempting to do the install.
thanks! it is not often you come across an install guide that matches your own application 100%.
you're welcome. I couldn't find a video on this, so I decided to post it after all of the researching that I did.
Appreciate it! I'm about to do the exact same install but try the 70-8114 instead of the aswc-1 per the comment in this thread!
Great video Colin! If you use Metra 70-8114 then you don't have to splice in the 3 wires to the existing Steering Wheel Control plugin.
Thanks for the info!
I am very glad to have found this video, but I'm too old now to go to all this kind of work. I like my original car stereo just fine, but the display likes to go extremely bright when the car first starts most of the time. It's especially annoying at night. If you drive for a while it fixes itself. It appears to be related to the humidity. Anyway, I'm looking into replacement options and this was excellent information. Thanks
Thanks for the feedback, Kenny.
Thank you so much again for this video! Got it all hooked up first try and everything works great!
Awesome. I'm glad you got it working
I don't comment on videos much but had to for you! Thanks for the video man. Installed mine and it works great! Thank you to the other comments, they've helped a lot too!
I'm glad you found it helpful! Thanks for leaving a comment.
Hello I appreciate your video install I have the 2012 JBL system without nav and wanted to make sure the tyto-01 harness is the correct one Amazon says it will not fit and none of the comments discuss using the harness on any of the third gen cars, Thanks
I have a 3rd gen 2010 prius with JBL w/o Nav, and Amazon also says it will not fit on my car. I believe it should work for you car. You can attempt to return it if it does not.
We’ll done man! Looks great! I think my bluetooth is starting to fail or something weird. I’d love to get a legit head unit in here. To bad gotta buy so many dang adapters and what not. Probably worth it though. I want an amp too
Thanks. Let us know what you decide to do
Anyone have any info for a 2001 Lexus gs300 I have tried messing with the blue and blue/white wires but idk why it doesn’t work the sound is there but barely audible and the sound sounds distorted raspy?
I would pay you to do this for me if you were based in London, UK. I am not too confident to partake in this job. Some say chinese car units are bad. 😅 thanks for sharing.
Thanks. Unfortunately I'm in California, US. Is there a local auto/audio shop that can install it?
Colin, a few questions:
1- I do not have the JBL package. Do I still need to purchase the amp module/harness? How do I connect the speakers to the pioneer unit?
2- reverse gear signal wire- where did you source the wire for this? Did you tap into reverse lights and use this wire for the rear camera and to connect to pioneer unit?
3- parking brake wire- were you able to use the video functionality on unit while driving without connecting this wire to anything? I read in other comments to connect that wire to any ground source to bypass the parking limiter. Wondering if I need to ground it or can leave it hanging.
4- can you tell me which rear camera you installed with this unit? I was reading the voltage on certain cameras can be an issue
Thanks!
Hello Shafi,
1. You do not need the JBL amp package. You can purchase this harness, and connect the wiring from the back of the stereo to harness. This will then connect to the plugs behind the dash. amzn.to/2QYrni4
2. I had a wire tapped into the (I believe red/blue, not the white) wire from the right rear reverse light bulb to power the backup camera when in reverse. I had to supply 12v of power to the unit when reversing as well. See the middle of this link (pin 29) for where to tap into. You can also run a very long wire from the reverse light into the back of the unit. priuschat.com/threads/tapping-into-reverse-light-for-backup-camera-help-please.190377/
3. I actually could not play videos because I left the wire hanging. It will need to be grounded, or connected to something like this. amzn.to/3fGAv5t
4. I currently have this backup cam on amzn.to/3dB15tU
@@ColinLeung I love you. Thank you!
@@shafi10a You're welcome
Excellent job! Keep up the good work!
Thanks
Hi I’m trying to find after market player but not sure if mine is a single or 2din stereo. I have a Prius 2014 hybrid
The Prius is able to accept a double din with this faceplate amzn.to/3LBl78f
You can also do a single din with a tray underneath amzn.to/3f8Gim9
This is a very informative video but what about the 2010 Toyota Prius is that do not have a JBL system I'm not finding anything anywhere on how to hook up a new stereo on a non JBL system
Awesome video but unfortunately it won't work for my 2010 Prius non JBL. I do know the JBL system and the stock system uses different adapters I believe
Sorry to hear that
@@ColinLeung or do you think it'll be the same principle maybe just different part numbers?
@@Senorlatulla The principle should be the same, but I'm not sure what the non JBL wiring looks like. Theoretically it would be easier, and you may only need the standard stereo harness and Metra Axxess ASWC-1 Universal Steering Wheel Control Interface (if you want to use that). You would NOT need the Metra TYTO-01 JBL Amplifier Interface Harness.
There are screenshots of the prius wiring diagrams that start at 5:10 if you are inclined to read through that, and match the wires on the stereo harness and steering wheel control interface.
Let me know if it works for you. Best Buy should also be able to install a stereo for you if you don't want to do it yourself. Good luck!
@@ColinLeung thank you Sir!
Hi Colin, Thank you for this video! I have one issue/question. After completing my install i now have a message that says “CHECK HYBRID SYSTEM” I’m assuming it’s the radio parking brake cause I left it unplug. The link you provided for the bypass is no longer available. Would you happen to know where i can purchase one?
Hello, I think I had that same issue because I turned the car on without having everything including the park switch plugged back in. I read that you can plug all the connectors, and turn the car on/off 3x and it'll reset.
I searched "Pioneer parking bypass" and found this product. If that doesn't work then you can search google for one.
amzn.to/46wZcZ2
Had same issue when started car without all the connections. Resolved it by disconnecting and reconnecting 12 volt battery to clear the message.
You are rock! Thank you for sharing this video.
Can you use back the Factory Mic for Handfree? Please advice.
There may be some way to wire it up, but the stereo I had came with a mic and a mic port in the back.
@@ColinLeungokay. Because it will be great to reuse what it has without having addition hardware and make the other redundant.
Thank you for the feedback.
Btw, do you know where to download an installation manual of Prius 2011? I would like to have some guidance in open up some interior covers
@@porkyong I do not. Try searching for a 2011 Prius Service Manual online. There may be a fee to obtain it.
The factory manual is on Toyota's website but is not in great detail for taking the car apart. www.toyota.com/t3Portal/document/om-s/OM47685U/pdf/OM47685U.pdf
I have to do this because my stock stereo can only access the radio. Entune and any bluetooth/aux option is totally inaccessable even after utility resets.
If I had access to aux I wouldn't care so much but I miss listening to my music on my stereo.
Thanks for sharing
did ur car catch fire u didnt use any conectors or solder like vid said dont twist bare wirws n tape them ice seen 2 cars burn cause of twist wire n tape hack job
Hello, the connections were soldered with heat shrink tube placed on after. The blue tape was used temporarily to test everything before soldering. I appreciate your concern! ruclips.net/video/pEERmGfjN_M/видео.html
Hoping you might see and be able to help, if I do this on a non jbl non nav and use ax toy28swc adapter with aswc1 will I retain the trip button on steering controls?
Hello Cade, I'm not too familiar with that adapter. You may want to contact Axxess directly and ask if it would work. Sorry
Hey Colin this is an awesome video I found a lot of answers here. but im struggleling because i dont have audio and i don’t know why. i did conect the blue/white wire to the red one as you did but still no audio. any advice?
Hello Daniel, it has been a while since I did this install and have since sold the vehicle.
Do you have the non-navigation Prius with the JBL speakers? I had to buy the Metra Axxess ASWC-1 Universal Steering Wheel Control Interface and Metra TYTO-01 JBL Amplifier Interface Harness, and connected them exactly as they were shown starting at 6:24.
If you also have the same setup, and installed it identically to how I did then theoretically it should work.
I'm not too familiar with setups for the navigation, or non JBL system, but did provide photos of the wiring diagram starting at 4:58 that you can reference.
@@ColinLeung actually my car is a 2012 FJ cruiser with the same JBL system and thanks to your video I figured out how to do it. I have audio now but I have another issue, when I turn my car off them I lose my audio again for about 5 to 8 hours. This is so weird
@@daniellacruz5666 That is weird. I'm glad you got your audio back. Perhaps you can bring it into a car audio installer to troubleshoot if you can't figure it out
Can you show how to upgrade Toyota Prius 2010 option 2 to Toyota Prius 2010 option3?
This is what I've been looking for myself (except for 2011), mainly because the stock stereo doesn't allow Bluetooth controls.
I haven't looked at the harness for a Prius 3 screen stereo unit yet, but I am presuming that if I buy one for the same year, it should work with minimum altering.
If not, I'm curious what that face plate for the stereo is called.
Great video! Thank you. Do u know if i’ll need the steering wheel control adapter if i purchased the new 1500 dex model that says its steering wheel control ready?
Thanks. I'm not too familiar with the new model, but I believe you still need to purchase the steering wheel control adapter because it's specific for the prius. I could be wrong though
Thanks just got one!
Great video, thank you.
You're welcome, Luiz
I have a 2012. I don’t see JBL logo anywhere on radio or speaker. I have entune with navigation and steering controls. How do I know if my unit is JBL or not? Also, what pre-built connectors to connect to parking switch and antenna.
Hello BR31, I think my car has JBL logos on the plastic speaker covers on the door, and I have an amp under the passenger seat. In this video the JBL logo on the bottom left of the stereo display. You may not have a JBL sound system if you don't see any of those indicators. Unfortunately I was only familiar with the hookup on my car, and do not know where the connectors are for a nav/non JBL. I copied screenshots of the wiring diagram i the middle of my video, which may or may not be helpful.
ruclips.net/video/WnY2F1iE0x8/видео.html
@@ColinLeung thank you much
@@br31woodlands69 You're welcome
Nice, going to try
Let me know how it goes
I don’t have Navi or jbl but I have a touchscreen unit. Switching to an android hu but I don’t see a plug with the pink(pin 6) red(pin 7) or green(pin 8) for the install of the ASWC-1 for the steering wheel control. Any idea what wire am I supposed to tap into? I have a 2013 Prius 2 with touchscreen hu. Thanks in advance
Hello Wa, I'm not familiar with the other setups besides what was on my car. I did include pictures of the wiring diagrams starting at 5:10. Perhaps you can look through those and find the wiring for your car. Thanks!
@@ColinLeung thanks for the response. I guess my Prius have a different plug than yours. I was messing with the features on the access website. I shows I need the AXSWC which looks identical to the ASWC-1.
@@ColinLeung so when you tap the black, red, green/orange, and black/green wire of the acxess steering wheel control interface to the plug, do that plug plugs back into the head unit it it just sits there?
@@wangu4951 The plug just sat there after tapping into it since we're no longer using the head unit
@@wangu4951 Great. I'm glad you were able to find a resolution
is it possible to buy an aftermarket radio for the prius that would allow you to use the factory reverse camera and steering wheel radio controls?
I'm sure it is possible, but I haven't looked into it. Sorry.
@@ColinLeung no problem
Thanks for this. Do the original mpg tracking and steering wheel controls still work with this new head unit?
If not, which head units retain these capabilities (I really like tracking my mpg and also being able to control music from the steering wheel without taking hands off the wheel).
Thanks!
Yes, it retains mpg tracking and steering wheel controls with the unit.
@@ColinLeung thank you Colin
You loose the ability to change your personal settings in the car though.
Can you show how to install the backup camera?? Great video 👍
Thanks. I installed the rear camera without recording the process. I pulled off the trunk plastic, disconnected one of the license plate lights, fed the camera power and video cable through, tapped the positive power wire into one of the rear tail light wires, grounded the negative cable to a random bolt close by, ran a long video cable to the AV unit, and reinstalled everything. I hope this helps.
@@ColinLeung Thanks brother, was it hard?? And how long was the process?
@@grimes9339 The hardest part was figuring out what to buy, and how to wire it. If you follow everything in the video step by step you may be able to finish in 3 hours. If I were to do it again, I could probably finish it in 1hr, or half the time if I wire capped the connections (which isn't recommended).
@@ColinLeung Do you mean installing the backup camera or head unit? I already have the head unit I just wanted a backup camera
@@grimes9339 I was describing the process to install the backup camera.
Hello great video!! Do you it’s gonna work on my car it’s a Toyota RAV4 2009 with JBL system sound from factory? I want to install ATOTO radio , please help me 🙏🏼
Hello @misanchelle2432, I'm not too familiar with the RAV4, so I do not know if it will work. Sorry
@@ColinLeung :( in amazon says it fits , but I’m not sure I’ve been buying a lot harness and none works .
@@ColinLeung thank you anyways
Hi, got a quick question, I've got a import prius in the UK and its the Sat nav one and all the writing is in Japanese, is the process the same?
Thank you.
Hello Mr A Hussain, I have only dealt with the US model, so I don't know if it's the same. Sorry. Hopefully someone else can chime in, or you can try taking the dash apart to see if the wiring is the same.
Thanks for the video. Assuming your new head unit has voice controls, did the TYT-01 allow you to use the voice button on the steering wheel?
I checked my car, and one of the voice control buttons controlled SIRI on my iphone. None of the other buttons worked.
The steering wheel control is kicking my ass I can’t find those wire you plug the green/black green/orange and black cable to
It might be different for non JBL and non nav systems. Which one do you have? I put a wiring diagram in the middle of the video that may help identify the steering wheel control wires for different setups.
That confused me too! L41 which is a totally different connector behind the radio.
I don’t no way my 2 speakers from driver and the next one don’t work can you help me please it is Toyota Prius
Does this work with the bluetooth phone call steering wheel controls?
I don't think it did. I think pressing the call button activated Siri when my iphone was connected. I suppose you could tell her to call someone that way.
Do your voice comand and telephone buttons on the steering wheel work?
Last time I checked they worked, but did not function like they should. Like one of the buttons activated siri.
hey epic video
did u do a video for when u installed the Rear cam please ?
Hello Ryan, I already installed the rear cam. I'm planning to change it out, and can create a video when I do that. Thanks
@@ColinLeung looking forward to this video :)
@@shafi10a Awesome. I hope you liked it
Colin thanks for posting this. Its a great reference for hooking up all the extras (Ie SW controls). Do you use an aftermarket amp? If so, where did you install? I have mine in the trunk case but getting some static and I think it may be too close to the hybrid battery. Just curious about your setup! Thx!
Hello Jeff, thanks for the comment and question. I'm using the stock audio system (speakers and sub). No aftermarket amp.
Toyota 2015 Pruis PlugIn Steering wheel control compatibility with this Metra device???
It should work for Prius 2010-2015
Hi, I have a Toyota Prius 2010 with JBL, but so far I still haven't found the adapter that fits in my new stereo. From the link you left available here, on amazon it says it only works on cars from 2005 to 2007. Does it really work on the prius 2010?
Yes, the adapter I used worked on my 2011 car.
Do i need that amplifier connection? I hv WM-TY1 harness. Unless the 2010 prius has it built in. Oh and dont care about steering controls. Dont use them.
629 used ouch
There's a newer model for $399. AVH-1500NEX amzn.to/3Qiu6wH
does the steering wheel trip function and climate control still work? Bestbuy installed mine but lost climate control and trip info on my steering wheel
Both work for me
@@ColinLeung Did you have to use a jumper on the oem wiring harness? The climate control buttons on the steering wheel uses a OEM harness that isnt used in the install of a radio
@@xpocad I did not use any jumpers. Only the two modules mentioned in the video, and spliced 3 wires for the audio controls. The climate controls work on my steering wheel, and I don't think I touched any of those wires. They may be connected to the heating control unit.
I had the same problem. I made a video on my channel on how to fix it.
Does the climate control on the steering wheel also thru this? Bestbuy installed a new radio but I didn’t get the volume control and they say I should still have climate control but now I lost climate control too
I do not believe it does. My climate controls are on the right of the steering wheel, and continue to work. My audio controls are on the left of the steering wheel.
I lost the trip button and climate
Does this have CarPlay built in?
Yes the aftermarket stereo has Apple Carplay built in
where are you located? bay area?
Yes, I'm in SF
@@ColinLeung Im in the bay area as well, looking to get this done to my prius. how much would you charge for this install?
@@macjusss Do you have a JBL amp and stock stereo without Navigation, and are installing an aftermarket stereo? I'm only familiar with that setup. I'd charge $50/hr. It might take 2hrs, but it depends on what needs to be done.
@@ColinLeung ?
@@macjusss Just texted you at that number. You should delete your previous comment unless you want strangers messaging you.