This is great, as I just started to create balloons bouquets for fun whilst in lockdown. And dont sell them I am struggling to find any on the stretchy balloon tape. Can you advise where I can get some of this not trade? The full name may help if you can give me that. It looks really useful thanks in advance
I followed your tutorial, which was fab btw. But unfortunately my inner balloon didn’t pop on the first stab. It just left a hole and started to slowly leak air. I used a pin… is it better the sharper it is? Also do you have to use a 24” latex balloon? Can you use a bigger size?
Hi Melissa, Thank you for giving it a go! If it just left a hole, this would suggest that you haven't inflated the inner balloon enough. I would try inflating them larger to put the latex under more tension, then when you pop it, you should get the satisfying BANG! :) There is no reason why you couldn't use a larger balloon, as long as you put the latex under enough stress to get the pop. I'm not certain you would be able to get the Clearz large enough to allow the 36" latex, or something similar, to be under enough tension to get the pop. Hope this helps!
We would not recommend using other tapes, the Clik Clik Stretchy Balloon Tape is the one that we have found best to reseal the balloon. It is available from most Balloon and Party Wholesalers here in the UK.
I tested one today. And the black balloon did not pop/burst. Instead, the needle made small tiny holes. I must’ve poked it 20 times and the balloon still didn’t pop! :( what could’ve happened? I used a 24” party city black balloon with a 20” bobo balloon outside
Oh no! Sorry to hear this. Here are a few things to try: 1. Don't inflate the balloons to their size limits. This will mean that they aren't under quite as much tension, and therefore won't pop with quite as much power. However, this is a balancing act, as the latex balloon must be under enough tension to pop rather than just deflating. 2. Allow time for the balloons to relax before popping. Give them around 30 minutes or so before you pop it. 3. Make sure the Stretchy Balloon Tape isn't placed too close to the Clearz seam and is stuck to the balloon really well. This will help to stop the balloon from tearing. 4. Use a really fine pin to pop the balloon. A larger pin will increase the chances of the Clearz popping. I really hope this helps!
Awesome tutorial. Thank you
Brilliant tutorial thankyou!
I've been looking for this trick a long time ago thank youuuuuuu
Can you use glue dashes? Would they work the same at the stretchy tape?
This is great, as I just started to create balloons bouquets for fun whilst in lockdown. And dont sell them I am struggling to find any on the stretchy balloon tape. Can you advise where I can get some of this not trade? The full name may help if you can give me that. It looks really useful thanks in advance
Hello,
I was wondering if i was to do this with helium, once i pop the inside black balloon, will the clear one float or no?
I followed your tutorial, which was fab btw. But unfortunately my inner balloon didn’t pop on the first stab. It just left a hole and started to slowly leak air. I used a pin… is it better the sharper it is? Also do you have to use a 24” latex balloon? Can you use a bigger size?
Hi Melissa, Thank you for giving it a go! If it just left a hole, this would suggest that you haven't inflated the inner balloon enough. I would try inflating them larger to put the latex under more tension, then when you pop it, you should get the satisfying BANG! :) There is no reason why you couldn't use a larger balloon, as long as you put the latex under enough stress to get the pop. I'm not certain you would be able to get the Clearz large enough to allow the 36" latex, or something similar, to be under enough tension to get the pop. Hope this helps!
@@AmscanInternational thanks so much for taking the time to reply! That makes sense. I’ll give it another go!
Thank you!!!
What brand of stretchy tape do you use?
Clik Clik Stetchy Balloon Tape, hope this helps :)
OMG!) 🤯🤯 THANK YOU!!
Great video, how long does the clearz balloon stay up after being popped? Thanks
Following the technique demonstrated below using stretchy balloon tape, ours was inflated for over a week.
Hi, could you tell me please, after you punch the balloon do you glue the tape to the puncture site again?
Using the Clik Clik Stretchy Balloon tape, the balloon will reseal itself
Thank you for this video. I'm in Australia, where could I buy the stretchy balloon tape?
Hi there, search for Clik Clik Stretchy Balloon Tape. This should help you in your search :)
Where can I buy the stretchy balloon tape please.
Stretchy balloon tape is available from most balloon and party wholesalers in the UK. Try searching for Clik Clik Stretchy Balloon Tape
is there a alternative to use for the tape as its very difficult to find here in the uk
We would not recommend using other tapes, the Clik Clik Stretchy Balloon Tape is the one that we have found best to reseal the balloon. It is available from most Balloon and Party Wholesalers here in the UK.
I tested one today. And the black balloon did not pop/burst. Instead, the needle made small tiny holes. I must’ve poked it 20 times and the balloon still didn’t pop! :( what could’ve happened? I used a 24” party city black balloon with a 20” bobo balloon outside
i like more the one put power the colors
Every time I've attempted this technique, I've popped both ballons. Any advice?... PLEASE HELP
Oh no! Sorry to hear this. Here are a few things to try:
1. Don't inflate the balloons to their size limits. This will mean that they aren't under quite as much tension, and therefore won't pop with quite as much power. However, this is a balancing act, as the latex balloon must be under enough tension to pop rather than just deflating.
2. Allow time for the balloons to relax before popping. Give them around 30 minutes or so before you pop it.
3. Make sure the Stretchy Balloon Tape isn't placed too close to the Clearz seam and is stuck to the balloon really well. This will help to stop the balloon from tearing.
4. Use a really fine pin to pop the balloon. A larger pin will increase the chances of the Clearz popping.
I really hope this helps!
@@AmscanInternational thank you so much
@@AmscanInternational my balloon pops from the other side and like the middle rips the clear one and they both pop
Please can you tell me how i can get on this tape on the ballon... Whats her name ??
The tape used to seal the balloon is Clik Clik Stretchy Balloon Tape. Hope this helps :)
Is there one on amazon?
,thanks for you
It is available from most balloon and party wholesalers here in the UK
I'm in iraq 😢