Hey just a little tip for the print head during the timelapse. With bambu lab studio navigate "Global" then "others" then scroll down to"special mode" "timelapse" select "smooth". This will move the head out of the way before taking the picture. This usually adds more time to the print but if you have a purge tower or multiple color prints the head moves out of the way anyways so no extra time is added. Hope this helps.
What do you mean? Im new to 3D Printing and am still trying to find how to make my prints the best quality, so far I have had to bring my friends dad to level it because I cannot. Any tips?
None if you only want to print in one color. You are always given the total cost and filament amounts before you print. It is your choice whether you want to print it or not
@@moronimtb6045 Well, you are right. It can make a lot and takes much longer to print also. I also changed to a #2 printhead vs. a #4 for some color Lithophanes. But it sure is great to have so many different options
Hey just a little tip for the print head during the timelapse. With bambu lab studio navigate "Global" then "others" then scroll down to"special mode" "timelapse" select "smooth".
This will move the head out of the way before taking the picture. This usually adds more time to the print but if you have a purge tower or multiple color prints the head moves out of the way anyways so no extra time is added. Hope this helps.
You should show a finished product when the print finishes.
Yeah he should definitely finish his print to show the final finished print in all it's finished glory.
Just ordered my P1S. I want to print a multicolor Settlers of Catan Thingiverse has some good 3D models.
That came out so clean! Did you do a custom profile for the silk or is it generic?
What do you mean? Im new to 3D Printing and am still trying to find how to make my prints the best quality, so far I have had to bring my friends dad to level it because I cannot. Any tips?
@@TurtleEngineer0😂😂😂😂
Where can I purchase or download stl?
Searching the stl too 😢
I want to see the poop chute
How much filament poop did that print make??? I can only imagine
Good point
None if you only want to print in one color. You are always given the total cost and filament amounts before you print. It is your choice whether you want to print it or not
@@randystevens2710 I have an X1C, I was just curious about how much purge material that specific print generates lol
@@moronimtb6045 Well, you are right. It can make a lot and takes much longer to print also. I also changed to a #2 printhead vs. a #4 for some color Lithophanes. But it sure is great to have so many different options
@@moronimtb6045 how much purge filament? Yes.