7.3L Powerstroke Cylinder Head Rebuild w/ Nitro Black Valves, & Comp Cams Springs - JAMSI Online

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 93

  • @davidhenri2722
    @davidhenri2722 Год назад +3

    Honestly, I own two of these engines. One in a Skoolie, another in my OBS Ford. I checked out your website and live 16 hrs. away. I would totally drive that 16 hrs to have my 7.3 rebuilt by you two. Nice work.

  • @darrelpastorius2221
    @darrelpastorius2221 2 года назад +3

    BEAUTIFUL QUALITY WORK !

  • @Wjones450
    @Wjones450 3 года назад +5

    pure perfection! your father/parents have been good teachers!

  • @garybaughman7099
    @garybaughman7099 2 года назад +1

    Enjoyed the video. It’s good to see that there are still skilled people who take pride in their work out there.

  • @rotax636nut5
    @rotax636nut5 Год назад +1

    Quality work, it's great to watch a reconditioning job being done properly, too many shops out there don't rise to this standard!

    • @davidhenri2722
      @davidhenri2722 Год назад

      Agreed. My last engine I rebuild need the engine block to be decked. I measured everything out and I knew what was needed on the block. I got the engine block back, Installed my crank, pistons, rods and measured my piston protrusion to find out the machine shop took off the maximum amount of material off the deck leaving me with only 1 thou. left on my protrusion. Engine still went together and is running now but is just complete laziness to what they did.

  • @robertweitlauf4653
    @robertweitlauf4653 3 года назад +5

    nice work, attention to detail is key to a nice product. so many production shops just want to get it out the door.

  • @baby-sharkgto4902
    @baby-sharkgto4902 3 года назад +6

    Awesome work as usual. I'm looking forward to the Serdi videos!

  • @tonye4176
    @tonye4176 3 года назад +2

    You’re very talented!
    Absolutely breath taking quality work!!

  • @8power0
    @8power0 2 года назад +1

    GREAT JOB DUDE, THANKS FOR SHOWING !!!!!!!

  • @davidmcnerney3048
    @davidmcnerney3048 3 года назад +1

    I paid 1100 dollars to have my 7.3 heads done. Im not sure what valves they installed but i had given them comp 910s and shims. They were nice and tight.

  • @garyboyle7203
    @garyboyle7203 4 года назад +3

    Been watching you on TikTok and love your content but I like how hunch more you can go in to more depth on what you guys are doing keep up the great work!!!!!!!

    • @JAMSIONLINE
      @JAMSIONLINE  4 года назад +1

      Appreciated! TikTok is fun because it is short & sweet... But I think RUclips could be a lot of fun if I can make time for it! Much easier to go in-depth, but much more time consuming to create the videos.

  • @johnrebus1641
    @johnrebus1641 Год назад

    I bet you guys love the Serdi!

  • @williebulletman5217
    @williebulletman5217 3 года назад

    I have to say I really love watching all your videos

  • @kctyphoon
    @kctyphoon 3 года назад

    I thought the video was awesome, and I liked the music.. some great looking work to be seen here. My only wish is that the current (at time of making the video) pricing was included for the delivered product. I understand people dont like posting prices since they can change, or dont want competition seeing them, but it's a huge help for people like us that are watching to get an idea if this is something we can actually afford to have done. Anyone that interested in finding out for dishonorable reasons can just call the shop and ask anyway. Great job on the heads and the video as well. Thanks for posting this.

  • @bjornbidell4519
    @bjornbidell4519 2 года назад

    Beautiful work!

  • @repairvehicle
    @repairvehicle 2 года назад

    This is top notch work!

  • @johnwilliams6407
    @johnwilliams6407 2 года назад +1

    Very good work thank you for your help

  • @joeferraro9884
    @joeferraro9884 3 года назад +4

    Great work very enjoyable to watch, top quality too... do you do 6.0 heads??

  • @channghiem5012
    @channghiem5012 2 года назад

    Great video bro!!!! Keep up the good work.

  • @2kbaby924
    @2kbaby924 2 года назад

    those 7.3 heads are so damn heavy

  • @duanedonaldson2262
    @duanedonaldson2262 3 года назад +1

    I remember when 3 angle cutters first hit the mainstream market, boy were we happy, no more refacing all those damn stones, what a waste of material. 3 angles plus the blend, NICE. Do you guys still do single angle valve jobs and do you have 2 different prices or with this one-step process, one job, one price?

  • @92rellab
    @92rellab Год назад +1

    I would love to do this for a living but the machines are expensive... can you guys make a video explaining how your dad started his business and the machines he used and if you can start over today what would you do differently

  • @kylegibson9288
    @kylegibson9288 2 года назад +1

    Great video with amazing detail on your process! I am currently looking for a machine shop to work on my 97 Powerstroke motor. I'm in Denver can I bring it to you? Or do you know any other shops that would work on it for me in Colorado? Looking to have rotating assembly balanced, heads decked, exhaust manifolds decked and possibly 0.020 over bore. Thanks and again great video.
    -Kyle

  • @jayengineeringheadrepair7360
    @jayengineeringheadrepair7360 3 года назад +1

    Super work sir from india

  • @FatBoy7.3Powerstroke
    @FatBoy7.3Powerstroke 11 месяцев назад

    What are the largest valve seats and valves that will fit in a stock bore application of a 7.3 Powerstroke diesel head and still have the correct clearances? 1.68 seems to be the OE Spec but I can see there’s room to expand both valves and also there’s plenty of room to cut wider seats to accommodate larger valves. Upsizing to a lager bore would also contribute to increased area for both the valves and seats. Is it possible to fit a 1.88 valve for intake and a 1.925 for exhaust and still have room for seats in a 4.11 bore? Possibly bored 40 over if needed? It would be tight but from my measurements and calculations it should be possible, but clearances on the seats and between the valves and cylinder walls are of concern. What are the largest valve and valve seat applications you’ve installed yet? Ported and Polished Heads with the correct size valves and seats, in combination with the right Cam and Possibly Fly Cut Pistons could revolutionize the Flow and Performance of these very common heads known for severe restrictions in stock applications. If you don’t mind providing your opinion and experience, What do you think?

  • @zigandarov
    @zigandarov 2 года назад

    7,3 L cool big black

  • @flightofarrow
    @flightofarrow 3 года назад +1

    Great skills

  • @YadaBean
    @YadaBean Год назад

    I live in colorado and could deliver my heads to you in Greely. how much do you charge to do the machining work on the heads if i provided the injector cups, valves, valve seats, valve guides, seals, springs, shims, keepers, etc nothing wrong with the heads just doing a total rebuild and dont wanna leave anything undone

  • @nazariomadula4353
    @nazariomadula4353 3 года назад

    very good job

  • @channghiem5012
    @channghiem5012 5 месяцев назад

    can you do a high performance valve job on a 6.0 powerstoke next?

  • @frank8534
    @frank8534 3 года назад

    Sweet

  • @lmm2013
    @lmm2013 3 года назад +3

    That's beautiful, take my money!

  • @osbaldo8942
    @osbaldo8942 3 года назад +4

    Can I ship to you if I ever need to send my heads

  • @PaG-ev7by
    @PaG-ev7by 10 месяцев назад

    I love it when they plaster music over them talking….

  • @matthewmiddleton63
    @matthewmiddleton63 Год назад

    What is the importance.of the black valves?

  • @JOSHUAK71
    @JOSHUAK71 3 года назад +1

    Do ever ring the PowerStroke heads?

  • @bernarddaily3335
    @bernarddaily3335 3 года назад +1

    How much is a average cost to do this job on a set of 7.3 heads? From the New England area have new valve springs so I want the heads rebuilt

    • @bernarddaily3335
      @bernarddaily3335 3 года назад

      Just to add the heads only have 105xxx on them just doing a 600 hp project new basically everything besides pistons and rings

  • @ЕвгенийДорофеев-с8с
    @ЕвгенийДорофеев-с8с 3 года назад +1

    Класс 👍

  • @prairiediesel6721
    @prairiediesel6721 6 месяцев назад

    Awsome to see the process! Plz get rid of the music though

  • @RickBaconsAdventures
    @RickBaconsAdventures 2 года назад

    like the new vids with no music

  • @kmeinh7097
    @kmeinh7097 Год назад

    Do you sell rebuilt 7.3 heads or can I ship heads to you to rebuild? You do good tedious work

  • @badkarma6181
    @badkarma6181 3 года назад

    👍👍👍👍👍

  • @Trident_Euclid
    @Trident_Euclid 3 года назад +1

    Man. I wish I could work with you to gain real workshop experience. But I live so far from you 😥

  • @munemrabadi809
    @munemrabadi809 2 года назад

    where are you located? I have a set of 6.0 powerstroke heads I'll like to send to you guys to rebuild for me.

  • @wyattturner1651
    @wyattturner1651 3 года назад +1

    How did you clean out the injector cup bore?

  • @VASYL198
    @VASYL198 3 года назад

    It's crazy lot work! What price for 2 heads with parts?

  • @t_train3796
    @t_train3796 3 года назад

    What's a ballpark for what this job would cost?

  • @hoyay850
    @hoyay850 4 года назад

    Is that the original cradle that came with your TCM? I have a TCM-25 as well, but my cradle looks different than yours. Just curious.

  • @Dodgecityhorse
    @Dodgecityhorse 4 года назад +1

    What's the cost for this job?

  • @hoyay850
    @hoyay850 3 года назад

    HOW are you able to cut seats like that on your TCM? I just picked up a TCM and have been messing with it for about 3 weeks. I CANNOT get my seats to cut straight AT ALL. I have checked the spindle run out with a er32 collet and precision ground rod and I only have 7 tenths run out. I have it damn near dead nuts level as its ever going to be at the spindle, and the guide is dead nuts level too. But when I check my seats by lapping like you do, I'm getting very, very poor concentricity. I'd love it if you'd help a newbie out and let me pick your brain sometime!

    • @hoyay850
      @hoyay850 3 года назад

      Im using the goodson 3D fast cut, regular tapered pilot (not carbide). My guides have miles, but aren't really worn..at least not worn in the thousands, maybe the tenths.

    • @JAMSIONLINE
      @JAMSIONLINE  3 года назад +1

      Shoot me an email info@jamsionline.com

  • @scotts439
    @scotts439 3 года назад

    what brand are your ball drive tool bodies?

    • @JAMSIONLINE
      @JAMSIONLINE  3 года назад

      They are sunnen style but it’s a Chinese copy that we got on eBay.

  • @Irishjay1025
    @Irishjay1025 3 года назад

    how much need to get some 7.3 heads done soon I am located in Pueblo CO

    • @Frosty_Saiyajin
      @Frosty_Saiyajin 3 года назад

      Get some rebuilt ones and keep your old ones as cores for future purposes. If the old guides and seats are in good condition and just in need of rehoning/polishing + resurfacing the deck mating surface it might cost 250 a head, whereas getting rebuilt ones might cost 300 a peace. It's your decision man but I'd go with the rebuilt ones.

    • @Irishjay1025
      @Irishjay1025 3 года назад

      @@Frosty_Saiyajin I am building a 7.3 capable of 700+ hp lol no thanks on the rebuilds.

  • @tristanwiebe151
    @tristanwiebe151 3 года назад +1

    Damn, know where I'm interested in sending my heads away if I ever have to tear into the ol gal

    • @JAMSIONLINE
      @JAMSIONLINE  3 года назад +4

      Haha! Appreciate it. We have a new valve seat machine, so if you liked what you saw in this video you will LOVE the work we are turning out on the new machine.

  • @Scubasteve22
    @Scubasteve22 4 года назад

    Nice job! Are you guys in kansas?

    • @JAMSIONLINE
      @JAMSIONLINE  4 года назад

      We are in northern Colorado near Greeley.

  • @ralphcarruth2643
    @ralphcarruth2643 3 года назад

    What’s the cost on this job

  • @RickLaws83
    @RickLaws83 2 года назад

    What the name of the software you use for specs?

  • @randymagnum143
    @randymagnum143 2 года назад

    Can't you just swap MV445 heads on?

  • @nazariomadula4353
    @nazariomadula4353 3 года назад

    can you give me the valve dept of izusu 4hl

  • @johngilbreth4596
    @johngilbreth4596 2 года назад

    How much was all
    This

  • @johnvweber
    @johnvweber 3 года назад +2

    Please consider making videos without the background noise.

  • @graveyardrumblers
    @graveyardrumblers 3 года назад +3

    Nice video... Could do without the music though lol

  • @boaterbil
    @boaterbil 3 года назад

    Again

  • @SteveNeider
    @SteveNeider 6 месяцев назад

    Great video, lose the annoying competing music

  • @bozscaggzz7475
    @bozscaggzz7475 3 года назад +2

    If I may make a suggestion, please cut out the horrible generic music and show us the work being done in real time/speed. Not too much speed shots so we can see that really cool work. Thanks.

    • @JAMSIONLINE
      @JAMSIONLINE  3 года назад +4

      Check out some of my newer videos and tell me what you think! (No music, hopefully more real time speed, etc)

  • @jeffhopper3526
    @jeffhopper3526 6 месяцев назад

    the background music... pass... (Was a whippersnapper back then)

  • @amjadmohmood6391
    @amjadmohmood6391 3 года назад +3

    You gotta get rid of the annoying music

  • @GNX157
    @GNX157 3 года назад +1

    +1 on getting rid of the annoying music.

  • @snowdog90210
    @snowdog90210 2 года назад

    Man, I like your videos, but that music is god-awful.

    • @JAMSIONLINE
      @JAMSIONLINE  2 года назад

      This is a very old video lol, none of my videos have music these days 👍🏼

    • @snowdog90210
      @snowdog90210 2 года назад

      @@JAMSIONLINE that's good. I just kind of watch them as they show up in my recommended. I'd much rather hear the music the machines make

  • @RenaissancePeopleNYC
    @RenaissancePeopleNYC 3 года назад

    horrible annoying music

  • @hankclingingsmith8707
    @hankclingingsmith8707 3 года назад

    DUDE I HAD TO STOP WATCHING BECAUSE OF THAT TRIPY MUSIC. DONT NEED IT

    • @JAMSIONLINE
      @JAMSIONLINE  3 года назад +1

      I would encourage you to give us one more chance and watch one of our newer videos! They don’t have music lol

  • @hamiltoncooper3603
    @hamiltoncooper3603 3 года назад

    Tik tok type music is garbage

  • @CaseyHolden-kh5nf
    @CaseyHolden-kh5nf Год назад

    How much does this cost?