Just a heads up: putting OpenTabletDriver in the osu! folder can have unintended effects, since the built in updater has moved unrelated files when updating in the past. It's best to put it in its own folder as the installation guide suggests.
i have a problem with the cursor, it goes to the top corner and after watching this video, im very happy bcuz i know where's the problem is, thank you so much mr jaeky! :)
Really informative and quick, thank you for that. I didn't actually received my tablet yet because of the delivery time but I'll come back to this video to already get a base configuration and not have to worry about whatever the default configuration is. I'll try to find more info on the smoothing part because it looks like something you need to ajust according to you and the tablet/pen and not copy paste everyone else settings
I made my display ONLY display on the 1st monitor and it still lets me move to the 2nd monitor and i set my tablet area to something smaller and it still lets me use the whole tablet.
@@zoebencharski5341 I have resolved my issue, make sure you don't have 2 tablet drivers. After deleting my unused driver and restarting my pc, my tablet seems fine to this day. I'm using a Gaomon S620 with OpenTabletDriver
you could use the rotate setting to change the angle i use it because my tablet is like 3 times bigger than most of the osu tablets so i use my tablet vertically
I found this video pretty helpful its been a while playing OSU! feels good again. I have one issue when im playing sometimes my curser studders trying to hit jumps. Im using the same filter and settings. instead of width 75, I found width 70 to be my sweet spot and I use the same height. I'm using the Wacom CTL 4100 any recommendations to fix the random studder issues (almost feels like the curser stays in one place for a split second) EDIT: I think I found the solution myself. I had my tablet plugged into usb 2.0 port, plugged it into 3.0 all seems well.
doesn't work for me, i turned lock aspect ratio off and on and it still does, i turn on lock to display and it doesn't and when i try and change the area it stays as the first area i put.
@jaeky 9:02 He's definitively talking about rotating the area 180 degrees ^^ This can be achieved by right clicking the area, hovering over to the "flip" tab and then clicking "vertical" or "handness" The person asking this question's probably a CTL472 owner and/or probably left handed Source: CTL472 owner + left handed. The wacom drivers (on their latest releases) added an area orientation setting to sorta "fix" this issue PS: this wouldn't be a problem if the cable was longer (like the one found on the CTL/CTH480) and placed the usb port on the top rather than on the side...
the driver doesnt detect my tablet unless i unplug it and plug it back in, then it gives me a little guide and closes after im done clicking through it, is there a fix for this?
I downloaded and edited the mapping in the driver but the tablet still treats it as it the entire tablet is being used despite being only a small mapping.
hello I need help I keep experiencing a weird double click like my cursor has a ghost like cursor following it and it prevents me from clicking on the thing I want to when hovering with the solid cursor. How do I fix?
I know I am super late, but I have a problem! whenever my tablet detects my pen, the cursor starts shaking like crazy. adding antichatter/latency made it worse, it continued shaking AND it started having a huge tracking delay along with the cursor randomly teleporting to other places on my screen. Please help!
Hello, everything went almost right in the tutorial, but when I enter the OSU and move around the tablet, a second cursor appears quickly, could you tell me what it would be ?? my tablet is a WACOM CTL-480-3
my wacom intuos isnt supported. do i need the driver? :II also...my pen is sometimes, idk, "laggy"? its like it doesnt react and then i fail clicking circles
Usually I use my wacom tablet to draw and play osu, In order to use this new driver for my osu game, I have to uninstall the wacon drawing tablet driver which is better for drawing. Is there a way to solve this other than having to uninstall and reinstall all the time?
*HELP* i uninstall wacom driver before using this but it still doesn't detect my tablet. Under Console one message says "Another tablet driver found: Wacom" i don't know what to do please help
By left handed/right handed, they mean rotating the tablet area by 180°. You can do that by right clicking your tablet are and selecting Flip > Handedness
Hello I just wanna ask something is a tablet driver necessary? I recently bought an xp-pen tablet then I installed the driver but when I installed the driver a keyboard pops up on my login screen whenever I restart or turn on my PC and I uninstalled my xp-pen driver the keyboard pop up was gone so I decided to install the driver again and the problem is back the keyboard is still popping up whenever I restart or turn on my pc so I uninstalled the driver and I decided to play osu without a tablet driver then I set my sensitivity on osu on 3 which worked out pretty well but I was just wondering if a pen tablet driver is really necessary
Hello. My tablet is stuck on like one line and doesn't go into the corners like how I want. I'm not sure why it doesn't use the whole area it's basically set to one setting and I can't reach notes in the corners.
For some reason the driver only detects my tablet when it is ran at is an administrator. However, I can't use plugins/filters. Is there any way I can fix this?
i did the same exact thing as the tutorial showed. it works when I open the driver but if I try to move my pen on the tablet, it says, "Lost connection to daemon, exiting..." and then the driver closes. does anyone know how to fix this? ty
PLS HELP! if the software is opened, my tablet wont work on osu but if it was closed, it worked but the software settings is not applied.. my tablet is XP-PEN g640 but it said it was compatible..
hey a little late but i have a wacom ctl472 and i have this problem that when i move the pen the cursor doesn’t go with it it’s like it have a little lag or something, need help
No matter what I do no tablet driver will override windows 11 default tablet settings and I can't figure out how to disable/uninstall windows shenanigans, any help?
the same problem, the stock driver works, but the opendriver and the driver from hawku do not want to recognize the tablet so that it does not do if you find a solution, I will be grateful if you help
My cursor latency are getting slower and slower after using it for a long time, is there any way to fix this? My filter is none i haven't installed any filter on my driver yet
I can only use one site of my monitor ingame, its like an invisible wall in the middel so my cursor cant move any further. how do i fix that? And it permanently scrolls down in the song list so i cant select any maps.
i need help i have the display in the driver set to my main monitor on the right but ever time i put the pen driectly on the tablet it the right or left
My cursor keeps jumping between the resize and the default size, help. And the resize seem not to work, it only using the default size when i tried to play
hey small question, so i put in my area and saved and applied it already but it doesnt work, it still uses like the entire tablet as an area like the area does nothing at all any tips?
@@name4278 i forgot now, but im pretty sure you have to uninstall your normal tablet driver (so if you have a wacom tablet and installed the wacom driver before the opentabletdriver, deinstall that)
Just a heads up: putting OpenTabletDriver in the osu! folder can have unintended effects, since the built in updater has moved unrelated files when updating in the past.
It's best to put it in its own folder as the installation guide suggests.
why would anyone want to put it in the osu folder anyways 🤣
@@p1ayM0NKEY 74k views good chance one of them isn't the brightest tool in the shed
plus where here for osu we all kinda special
my pen button on my wacom ctl 472, like when i click it doesnt work
@@DeontologicalConsequentialism who use pen button 💀
was watching this out of boredom and u are such a patient person lmaoo
Extremely informative! First time using a pen table and ready to start playing OSU!
Huge kuddos c:
i have a problem with the cursor, it goes to the top corner and after watching this video, im very happy bcuz i know where's the problem is, thank you so much mr jaeky! :)
how did you fix it because I'm having the same issue?
@@rim314 turn off raw input on the mouse section
THANK YOU SOO MUCH the cursor when i was using my tablet was stuck at the corner, thank you for helping me!
Same
That’s because you did/didn’t have raw input enabled
when i have it on it does it
@@Wafflasy
Really informative and quick, thank you for that.
I didn't actually received my tablet yet because of the delivery time but I'll come back to this video to already get a base configuration and not have to worry about whatever the default configuration is. I'll try to find more info on the smoothing part because it looks like something you need to ajust according to you and the tablet/pen and not copy paste everyone else settings
For those about right handed and left handed go to rotation and set it 180
your the goat for that
thanks!
didnt work
THIS WAS THE PERFECT VIDEO.. and it came out the literal day my s620 arrived
Do you still play ?
Very well organized!! Nice video
Thanks dude I couldnt find anything that actually helped. youre great
Thank you so much for the tutorial.
I'll keep practice using my tablet for drawing and playing osu and be better!
A tablet isn’t going to make you better if anything it will make you worse 😂
if that was true the top players would use a mouse
@@tazyt08
@@tazyt08 i mean if you look at the top 1000 you'll see the percentege of the tablet users soo what's your point here?
thank you bro. straight and to the point - love it!
thank you for this setup. helps me getting use deco fun xs in no time.
Excellent, thanks my man.
Everything worked as intended the first time.
Thank you so much, everything was simple and clear and your suggestions very helpful
Thank you so much for this guide! I can finally use my tablet now for Osu :)
I really Like your voice it is so calming
the perfect timing doesn’t exis-
I made my display ONLY display on the 1st monitor and it still lets me move to the 2nd monitor and i set my tablet area to something smaller and it still lets me use the whole tablet.
same prob
@@remi_qant same
@@zoebencharski5341 I have resolved my issue, make sure you don't have 2 tablet drivers. After deleting my unused driver and restarting my pc, my tablet seems fine to this day. I'm using a Gaomon S620 with OpenTabletDriver
Thanks for this video. Helped me setup my very first tablet.
you could use the rotate setting to change the angle i use it because my tablet is like 3 times bigger than most of the osu tablets so i use my tablet vertically
for some reason when i use tablet i have two cursors, and they keep disappearing and reappearing for some reason, do you have a fix to this?
yea me too
You are amzing i love you for this guide
I have this problem, I use two keys two click on my keyboard but only one works. Can someone help me?
nvm I fixed it:)
I found this video pretty helpful its been a while playing OSU! feels good again. I have one issue when im playing sometimes my curser studders trying to hit jumps. Im using the same filter and settings. instead of width 75, I found width 70 to be my sweet spot and I use the same height. I'm using the Wacom CTL 4100 any recommendations to fix the random studder issues (almost feels like the curser stays in one place for a split second)
EDIT: I think I found the solution myself. I had my tablet plugged into usb 2.0 port, plugged it into 3.0 all seems well.
had the same problem with my wacom ctl 4100wl and i use your solution, it wored well, thanks for the solution
My pc won't let me open this driver anymore.
It used to let me open the driver but now it doesn't
doesn't work for me, i turned lock aspect ratio off and on and it still does, i turn on lock to display and it doesn't and when i try and change the area it stays as the first area i put.
when i set my area for my my tablet i save and apply and it wont go faster and makes me move across my entire tablet :im using a wacom 472
what am i suppose to do then my tablet is supported but it says "Requires Zadig's WinUSB to be installed on interface 0"???
@jaeky 9:02
He's definitively talking about rotating the area 180 degrees ^^
This can be achieved by right clicking the area, hovering over to the "flip" tab and then clicking "vertical" or "handness"
The person asking this question's probably a CTL472 owner and/or probably left handed
Source: CTL472 owner + left handed.
The wacom drivers (on their latest releases) added an area orientation setting to sorta "fix" this issue
PS: this wouldn't be a problem if the cable was longer (like the one found on the CTL/CTH480) and placed the usb port on the top rather than on the side...
the driver doesnt detect my tablet unless i unplug it and plug it back in, then it gives me a little guide and closes after im done clicking through it, is there a fix for this?
I downloaded and edited the mapping in the driver but the tablet still treats it as it the entire tablet is being used despite being only a small mapping.
Did you ever fix it? If so how
Ive been have some issues with the software i changed my tablet size and its the same speed for each size i put, any fix?
same did u fix this issue?>
even when i set my tablet area to smth smaller it just ends up working the same as full screen, how can i fix this?
Does this work with every tablet
thank you very much!!!!!
Yo thx a lot, the filter u are using is so good ! I was using Hawku noise filter, but yours is perfect ! (my acc is gonna step up a lot)
my tablet doesnt apply any of the settings saved but it is supportted ???
hello I need help I keep experiencing a weird double click like my cursor has a ghost like cursor following it and it prevents me from clicking on the thing I want to when hovering with the solid cursor. How do I fix?
I know I am super late, but I have a problem!
whenever my tablet detects my pen, the cursor starts shaking like crazy.
adding antichatter/latency made it worse, it continued shaking AND it started having a huge tracking delay along with the cursor randomly teleporting to other places on my screen.
Please help!
me too!!
i fixed it by exiting all the tablet drivers in hidden icons tab and restarting it
@@mattika what do you mean? I'm a bit confused (I'm a visual learner so it might be tough for me to understand)
is it worth getting a tablet? I've been playing with mouse for probably a year now but don't know if I should spend the money on a tablet
i think it is, every since i switched to tablet i just gotten so much more better and accurate
@@lacy5250 ok cool, thank you
For me the mouse drift was very annoying so for that reason alone i liked switching to tablet, takes a little while to get used to tho
this was a big help thanks
Hello, everything went almost right in the tutorial, but when I enter the OSU and move around the tablet, a second cursor appears quickly, could you tell me what it would be ??
my tablet is a WACOM CTL-480-3
how i know where is my old driver, and how i can uninstall the old driver, pls help
how do you click without the pen?
f10 if you want not to click when playing osu (must press f10 when you are IN osu! lol)
thx bro it helped good guide
my wacom intuos isnt supported. do i need the driver? :II
also...my pen is sometimes, idk, "laggy"? its like it doesnt react and then i fail clicking circles
Same , mine says it has missing features
Usually I use my wacom tablet to draw and play osu, In order to use this new driver for my osu game, I have to uninstall the wacon drawing tablet driver which is better for drawing. Is there a way to solve this other than having to uninstall and reinstall all the time?
Good for you the wacom tablet driver can be used but mine isn't, it tells me that its uninstall.exe is missing :/
what if my tablet isnt supported tf do i do
*HELP*
i uninstall wacom driver before using this but it still doesn't detect my tablet. Under Console one message says "Another tablet driver found: Wacom" i don't know what to do please help
i have the huion 420, it says it recognizes my tablet and everything but my tablet still wont move on screen. Why???
Mine just came in your upload time couldnt be more perfect and same model too :DDD
7:04 can also happen when you dont use 1.0 sens ingame
Everytime i close my tablet driver it doesnt move anymore?
By left handed/right handed, they mean rotating the tablet area by 180°. You can do that by right clicking your tablet are and selecting Flip > Handedness
wouldnt flipping the rotating just make it inverted not left handed?
@@vertic333 my bad, should have clarified. It's only inverted horizontally
@@Pearoo haha its all good, i'm just weird and like to practice with my left hand. thank you though
Hey, can i ask why my buttons apply and save dosent work, when i tried to save it or apply it it dosent work i dont know what is wrong with it
Whenever I change my tablet area it will glitch my mouse and make it go back and forth really fast I don’t know how to fix?
Hello I just wanna ask something is a tablet driver necessary? I recently bought an xp-pen tablet then I installed the driver but when I installed the driver a keyboard pops up on my login screen whenever I restart or turn on my PC and I uninstalled my xp-pen driver the keyboard pop up was gone so I decided to install the driver again and the problem is back the keyboard is still popping up whenever I restart or turn on my pc so I uninstalled the driver and I decided to play osu without a tablet driver then I set my sensitivity on osu on 3 which worked out pretty well but I was just wondering if a pen tablet driver is really necessary
so whenever i use my pen my cursor tends to teleport and glitch, but when i hold one of the pen buttons down it stops this. any suggestions?
@jaeky
Hello i need some help i watched the video and for me in game apeares scretches how can i off that in game ?
Thanks this was useful
set it up and kept it minimized, nothing happened though and the tablet remained the same. any fixes? (yes i opened the thing that opens console)
so when i open ,,OpenTabletDriver,, it keeps telling me to download NET or kind of things. is that normal?
You need the net desktop realtime x64 to run the software
Hello. My tablet is stuck on like one line and doesn't go into the corners like how I want. I'm not sure why it doesn't use the whole area it's basically set to one setting and I can't reach notes in the corners.
Is OpenTabletDriver any better than using original software, for example HuionTablet?
any other plugins recommended?
WTF i was watching your year old video just yesterday cant believe this came out!!! got my new tablet 2 days ago!!
Same
thx this help me a lot.
i literally just cant get it to detect for some reason. ive tried uninstalling the original driver but it still doesnt work
I tried everything I have huion h610pro and it's supported but it's not working is there anything I can do?
For some reason the driver only detects my tablet when it is ran at is an administrator. However, I can't use plugins/filters. Is there any way I can fix this?
i did the same exact thing as the tutorial showed. it works when I open the driver but if I try to move my pen on the tablet, it says, "Lost connection to daemon, exiting..." and then the driver closes. does anyone know how to fix this? ty
when i save and apply my new area for my sense it doesnt change how do i fix this?
I accidently closed opentablet and now my computer wont detect it at all
idk why but whenever i use my pen on the tablet the cursor just doubles and keeps on right clicking for some reason can u help??
why wont it open? i have tryed to open it like 9 time and its not opening what should i do?
which are the best filters?
when i try to move my pen to the left it stays in the middle
Why is it so sensitive I have it hovering and it still moves do you know how
Yo fix that or is that a thing for every tablet player?
when i open obs or some other like application the tablet just stops working, if i alt tab to like chrome or sth it works again
PLS HELP! if the software is opened, my tablet wont work on osu but if it was closed, it worked but the software settings is not applied.. my tablet is XP-PEN g640 but it said it was compatible..
my ctl-472 tablet stopped working while I was playing, I tried everything nothing fix it, do you have any idea why?
Hello I am switching from mouse to tablet but my tablet cursor doesnt move and not sure what to do. Help please.
hey a little late but i have a wacom ctl472 and i have this problem that when i move the pen the cursor doesn’t go with it it’s like it have a little lag or something, need help
No matter what I do no tablet driver will override windows 11 default tablet settings and I can't figure out how to disable/uninstall windows shenanigans, any help?
my sens is so slow if i put to 1x in game and i tried making my size smaller but it don't change anything?
I got the Gaomon s620 and it not detecting and i did all methods.
the same problem, the stock driver works, but the opendriver and the driver from hawku do not want to recognize the tablet so that it does not do if you find a solution, I will be grateful if you help
My cursor latency are getting slower and slower after using it for a long time, is there any way to fix this? My filter is none i haven't installed any filter on my driver yet
why OpenTabletDriver.Daemon always tell me '' No tablets were detected.'' can anyone help me
i need helpt, even if i have my tablet width and height SUPER small like 2mm each it still only goes the full tablet length (i use Gaomon S620)
where were you when i first get my tablet, i almost throw it away because i could feel good with it
How do you actually plug in your tablet to your computer?
Is wacom one medium is supported by this?
I can only use one site of my monitor ingame, its like an invisible wall in the middel so my cursor cant move any further. how do i fix that? And it permanently scrolls down in the song list so i cant select any maps.
Whats your backround?
Only video you need
i need help i have the display in the driver set to my main monitor on the right but ever time i put the pen driectly on the tablet it the right or left
My cursor keeps jumping between the resize and the default size, help. And the resize seem not to work, it only using the default size when i tried to play
turn out i need to uninstall Wacom Tablet
i used Huion H420 and status is Has Quirks Notes:Windows: Requires Zadig's WinUSB to be installed on interface 0... what do i do?
hey small question, so i put in my area and saved and applied it already but it doesnt work, it still uses like the entire tablet as an area like the area does nothing at all any tips?
i have the same probleme do you find the solution?
@@name4278 i forgot now, but im pretty sure you have to uninstall your normal tablet driver (so if you have a wacom tablet and installed the wacom driver before the opentabletdriver, deinstall that)
@@name4278 but i really forgot now im sorry :( it works for me now though