So much cool stuff to show you on this trip. Stay tuned. Huge thanks to everyone on patreon. we couldnt have done this video without your help - www.patreon.com/uavfutures
why did no one actually explain things to him/us on camera..? Ste, multiple times you said "not sure what this is.. Not sure what this does.. Some hocus pocus magic..". Dude thats fine. but it left a little more wanted.,
@@Andrew-FKF In his defense, trying to learn how a factory works and all the inner workings in the few hours he's there then condense it down to 14 minutes is extremely difficult. He did the best he could in a short amount of time and did an awesome job at it.
@@EMAXUSA I would be very interested in know which CNC lathes and mills you use. I'm looking to buy a CNC lathe and a VMC from China and it would be nice to know if there are some manufacturers you can recommend.
the video seems jumbled you're moving from place to place not showing steps or explaining how they actually do quality control without saying how or showing how its done .i normally love your videos but this one left me wondering what i was watching and i felt like i didn't learn anything sorry Stew
I was in that factory about a month ago. He probably covered around 10% of the motor making process and went from step 7 to step 2 to step 15 to step 5. There are A LOT of small steps in the process and it was really amazing to see how much effort they put into designing, making and checking each and every one of their products. This was more entertainment than education.
Yep ,i agree . Was this a hired cameraman who didn't understand english ??? You jumped all over that factory and say look at this and look at that ,but that Fcking camera kept your face in focus and we saw jack squat . Now we know how your face look like in a chinese factory that is all we saw.
I dont get the haters on this vid, guys Stew did the best to show us the factory, at most places you are not allowed to film sensitive stuff and lots of details. if you want to examine sometin just pause the video and take a closer look. Good work Stew and Cal. cant waitfor the rest of the vids
they were probably told not too. and one did when he asked if he could take a prop for a sec. that and most of them probably dont speak English. Factory workers have a daily quota to fill and it can suck ballz catching up when your behind a large number.
What a messy video, it's not your best work we could not really see anything and as others have said it was jumbled. A documentary is a different approach to what you are normally doing and are good at.
I LOVE EMAX PRODUCTS! Congrats Stu for getting that exclusive. Great coverage and you shared a ton mate. Keep up the great work. You're quite an inspiration.
there was so much there, it was a great day, plus stay tuned I have a second vid where we go to the main office and check out the first glimpses of a 2s tiny hawk
9:40 Cal appeared!! Good job Stu. I can tell you were excited but some more close-ups would be nice... you know... for when you go back next year... with Cal AND Trev!!!
Great prices for the amount of workmanship that goes into each and every motor. Thank you for the tour Stu and to all manufacturers for making our stuff.
Man , awesome tour !! Thanks for sharing we all of us who are on this hobby ! Thanks for all hard work these people do making drones and developing more fun for us !! This is MikeDroneUfo : all the fun with minidrones.
Thank you for only doing one factory at a time! You literally can stretch this content out as long as you want and I’ll be delighted to devour every second of it! 😁
UAVfutures Literally whatever company you have footage from next! Although, i am super super curious how the visit to Trappy and TBS went. The teaser you posted has me very eager :) Thanks m8! Hi to Cal!
Wow! That's kinda emotional to see where my BabyHawk-R was assembled. It was my first fast Quad I actually could race and do some freestyle. Well, EMax was part of my Quad flying experience since 2012/2013 with my 450 Flamewheel powered by KK 2.something...one Flight of it still on my channel. Happy flying!
Dude so glad I found your channel earlier this year, I would never have got into FPV otherwise! So much respect for you getting over there and showing us the stuff we would likely never see! Looking forward to banggood and diatone!
Thanks Stu for showing us all of awesomeness of emax. A question: Parts and quads are cheaper in China if you want to buy one directly there? Ok, no costs of shipping etc, but im interested in the difference. So how much can a chinese FPV pilot save compared to me in Europe or you Stu? :D
Loved this vid! I actually work for a company that builds those type of automated production machines! Very cool stuff going on there. I wonder if the need an automation engineer. Thanks Stu! Always killing it!
Great video Stu. It dispels the myth that some of these Chinese factories are dark and dingy sweatshops. Many years ago (about 35 or so) I used to work in a UK factory, manually winding motors and transformers for leading brand washing machines, and the comparison is night and day. Compared to the UK factory Emax’s facilities look more like a sterile hospital operating theatre. The UK factory was more reminiscent of a slaughter house as many of us lost vast quantities of blood and the odd finger or two. Once again thank you for such an interesting look at the source of our toys. Regards Nidge.
This was a video all about the quality control of Emax VS the actual factory tour and more of a step by step process. Glad to see you spent Patreon money on a Emax quality control tour/vacation. IMO
More of a look see of the factory, still amazing but boy just think of how cool a video would have been if able to take step by step tour on motors alone. I could see Stew and Cal were pressed for time and not in the comfort zone. Still all in all , at least we got to see how big this place is and a little idea of how the steps of product are made.
Very interesting stu, your vlogging was very good! Not far from tv presenter! Wow that was a great run through, it was'nt exactly how id imagined it to be! But nevertheless all very interesting! It was good of them to allow this! Tho i am dissapointed, as i have grown quite use to you attacking cal with something being your cam man was a let off!😂😂😉 great stuff guys! ✌👍
I've made injection mold tools before they can be very time consuming to make. It takes a lot to make sure they fit together correctly and dont flash extra plastic. those were very small blocks and only produced one or two things but still took a lot of machining time and manual labor to produce a quality mold. The majority of the ones i helped make were large and heavy. you needed a forklift to get the blocks in a CNC mill and flip them around for every milling processes.
Great video, wish it was more in-depth to what they were actually doing. Perhaps if there was a translator that could have helped and asked the workers!
So much cool stuff to show you on this trip. Stay tuned. Huge thanks to everyone on patreon. we couldnt have done this video without your help - www.patreon.com/uavfutures
UAVfutures can you to a budget tiny whoop build?
मनीष कुमार9608006676
Thanks for stopping by and making this awesome tour! Pleasure to have you over.
Love your products RS2205S is one of my first sets of motors. I still buy them to keep that quad flying. And love the way it flys with them
why did no one actually explain things to him/us on camera..?
Ste, multiple times you said "not sure what this is.. Not sure what this does.. Some hocus pocus magic..". Dude thats fine. but it left a little more wanted.,
@@Andrew-FKF In his defense, trying to learn how a factory works and all the inner workings in the few hours he's there then condense it down to 14 minutes is extremely difficult. He did the best he could in a short amount of time and did an awesome job at it.
@@EMAXUSA I would be very interested in know which CNC lathes and mills you use. I'm looking to buy a CNC lathe and a VMC from China and it would be nice to know if there are some manufacturers you can recommend.
Wish someone could have taken you around to tell u WTF everything actually was lol
the video seems jumbled you're moving from place to place not showing steps or explaining how they actually do quality control without saying how or showing how its done .i normally love your videos but this one left me wondering what i was watching and i felt like i didn't learn anything sorry Stew
I was in that factory about a month ago. He probably covered around 10% of the motor making process and went from step 7 to step 2 to step 15 to step 5. There are A LOT of small steps in the process and it was really amazing to see how much effort they put into designing, making and checking each and every one of their products. This was more entertainment than education.
It seems you did not get a red heart from steweee buddy?
It reflects Stew's mind, jumbled and jumping all over. ADD possibly? Really like Stew but it's hard to follow this.
Yep ,i agree . Was this a hired cameraman who didn't understand english ???
You jumped all over that factory and say look at this and look at that ,but that Fcking camera kept your face in focus and we saw jack squat .
Now we know how your face look like in a chinese factory that is all we saw.
Stopped mid video feeling the same, weired video. He's basically saying "and here they do stuff" again and again :/
great video would love to have gone
I dont get the haters on this vid, guys Stew did the best to show us the factory, at most places you are not allowed to film sensitive stuff and lots of details. if you want to examine sometin just pause the video and take a closer look. Good work Stew and Cal. cant waitfor the rest of the vids
Emax has always had premium components even back in 2009 when I started with fix wing. I'm so glad they expanded.
Anyone notice not a single worker looked up or even acknowledged Stew was there....🤔🤔🤔
they were probably told not too. and one did when he asked if he could take a prop for a sec.
that and most of them probably dont speak English. Factory workers have a daily quota to fill and it can suck ballz catching up when your behind a large number.
You're right, there should have been a lot more hugs 😋😋
Great vid but just some feedback it would be great if it was structured better came across very rushed with no detail.
What a messy video, it's not your best work we could not really see anything and as others have said it was jumbled. A documentary is a different approach to what you are normally doing and are good at.
6:45
Some lucky person out there now has the honour of owning a motor bell that has been touched by the great stu
I LOVE EMAX PRODUCTS! Congrats Stu for getting that exclusive. Great coverage and you shared a ton mate. Keep up the great work. You're quite an inspiration.
there was so much there, it was a great day, plus stay tuned I have a second vid where we go to the main office and check out the first glimpses of a 2s tiny hawk
@@UAVfutures I can't wait to see it. This is awesome.
@@UAVfutures r u kidding.. tis is wat i want 2 c.. 😍
After 2 years of FPV . I am still rockin the EMAX 2300kv red bottoms (not the S type.) amazing quality , strength and durability.
This is such a badass video! Love seeing what Im into being created
Where is the 2S version of the TinyHawk? Were you not allowed to show it?
quality control advertises this video
9:40 Cal appeared!! Good job Stu. I can tell you were excited but some more close-ups would be nice... you know... for when you go back next year... with Cal AND Trev!!!
Thank you to Emax for allowing us into your factory for behind the scenes view on how things are done. Good Job Stu, thanks for sharing :)
Usually i really like your videos stu but you got so messy on this one.
My first 5" was a Hawk 5. It is so cool to see what goes into making it. Thanks UAV Futures and thank you EMAX!
Really great view on how these things are made man. Thank you!!
Great vid Stu. Keep it up
Thanks Bob. Thanks Stu
Great prices for the amount of workmanship that goes into each and every motor.
Thank you for the tour Stu and to all manufacturers for making our stuff.
Thanks for the video. Interesting stuff !! Where is the best place to buy the Emax motors ? Does Emax have an online shop ?
Well done, really enjoyed this one. Very cool of EMAX to let you and Cal get that close and personal.
I really enjoyed the video! Thanks for posting this! I think it was great to get a quick glimpse of how some of our favorite stuff is made.
What name product?
Thank You! I like these kinds of videos.
Amazing insight... i am glad you and Crash Test Cal are having fun!!!
Hi stew can you find out when the 2s tiny hawk is out cheers
Man , awesome tour !! Thanks for sharing we all of us who are on this hobby ! Thanks for all hard work these people do making drones and developing more fun for us !!
This is MikeDroneUfo : all the fun with minidrones.
Thanks for making this video! Loved it
Thank you for only doing one factory at a time! You literally can stretch this content out as long as you want and I’ll be delighted to devour every second of it! 😁
thanks for watching mate, what would you like to see next?
UAVfutures Literally whatever company you have footage from next! Although, i am super super curious how the visit to Trappy and TBS went. The teaser you posted has me very eager :)
Thanks m8! Hi to Cal!
It's great seeing inside the factories and would be cool to see some sit-down interviews with the people who design & make our wonderful toys.
Emax is live legends! And I love hot props, especially on drone in the air :)
Thanks for sharing.
possibly introduce us to tour this factory as well? Thanks man
Great work Stu, loved it. My daughter Maggie wants me to buy a tiny hawk now to add to her collection! Lol.
Very interesting, emax has served me well over the years and now I see why!
Wow! That's kinda emotional to see where my BabyHawk-R was assembled.
It was my first fast Quad I actually could race and do some freestyle.
Well, EMax was part of my Quad flying experience since 2012/2013 with my 450 Flamewheel powered by KK 2.something...one Flight of it still on my channel.
Happy flying!
Very nice, good work mate.
What a great job bro. Thanks for sharing it with us man.
Excellent insight. Thanks Stu & Cal
Dude what an awesome video full of interesting stuff on every second...you go through every step, emax did not hide anything?
Dude so glad I found your channel earlier this year, I would never have got into FPV otherwise! So much respect for you getting over there and showing us the stuff we would likely never see! Looking forward to banggood and diatone!
Awesome vid! Stew is traveling.
Great video. Loved it.
Are you going to the Diatone factory?
Super cool for Emax to show us their Operations 👍
Fascinating video Stu. Was a bit nervous watching someone who loves talking with his hands, holding the expensive propeller die 😉.
Thanks Stu for showing us all of awesomeness of emax. A question: Parts and quads are cheaper in China if you want to buy one directly there? Ok, no costs of shipping etc, but im interested in the difference. So how much can a chinese FPV pilot save compared to me in Europe or you Stu? :D
Man those Chinese workers are all business! Not even a flinch with you guys making a ruckus! LOL
Real cool stuff Stu and cal.
Great to see the quality that put into all those parts. Great video and awesome product.
Looks like an awesome starter kit. Love the prop design and can’t wait for the 2S version
Thanks for the tour. Liked the motor winding part the best.
my pleasure. it was crazy how many motors they were making there and how many different sizes
The balancing was what peaked my interest really. Then showing that they test each one.... yes please.
what are you upto stew? are you going to have your signature hardware? that would be neat! ;)
Thanks guys very nice video. Awesome
Stu is like a kid in a candy store. Good on ya, mate!
I loved the mold manufacturing section! Super awesome to see how much of the full process they take on inside their factory!
really cool to see this :D Thanks Stu
Amazing sir, that RTF controller looks delicious.
IT IS, ill do a vid on it soon
so cool and beautiful thanks for this video I love so much Max and this video it is so amazing !!
I’m so happy I found your channel!
im happy you are enjoying it, thanks for watching
Was there anything you were not alowed to film?
Awesome! I’d really love to see the hq prop factory!
You are very lucky to see behind the scenes at EMAX. a lot of places would not do that.
Good video mate
Nice tour! 20k motors a day ... wow!
What do I need to do to get one of those cool shirts?
Looks like a kid in a candy store.👍😋🍻
💪🃏 SATISFACTORY!!!
Oh my god Stew. That was so interesting. Thanks for the good view behind the scenes. Stay awesome
Mate! That could have been an hour long episode. So cool.
yeah it was really hard to cut it down
Fantastic!!!!!!!!!!!!
Great video Stu! I’d love to see more videos of you doing walk arounds in production and manufacturing areas in the drone industry! 👍🏻
Loved this vid! I actually work for a company that builds those type of automated production machines! Very cool stuff going on there. I wonder if the need an automation engineer. Thanks Stu! Always killing it!
Just seeing all those tiny hawks...
A thing of dreams....
Great Video Wish I Was There I Got A ,Tiny Hawk In The Mail Cant wait.
Only Emax motors on all my quads! 🤘🤘🤘
Awesome experience! Thanks for sharing.
I was trained a bit in lean and kaizen, sound processes that can be adapted to anything, really didn't expect to see it in a fpv vid 😂
There's alot of "flaws" or "floors" to this factory Stu? 😂😂. Great content keep it coming 👍🏻
Cal in heaven next to the Prop machine . Stew you should have a Hard hat and earplugs on .lol
Great video Stu. It dispels the myth that some of these Chinese factories are dark and dingy sweatshops. Many years ago (about 35 or so) I used to work in a UK factory, manually winding motors and transformers for leading brand washing machines, and the comparison is night and day. Compared to the UK factory Emax’s facilities look more like a sterile hospital operating theatre. The UK factory was more reminiscent of a slaughter house as many of us lost vast quantities of blood and the odd finger or two.
Once again thank you for such an interesting look at the source of our toys.
Regards
Nidge.
Where's grumpy Trev?
It's great to see these places, I think Bob needs to do some decorating, the motor balancing room looks a little mouldy
This was a video all about the quality control of Emax VS the actual factory tour and more of a step by step process. Glad to see you spent Patreon money on a Emax quality control tour/vacation. IMO
Really cool inside look! Thanks a lot for doing this and another great video. A+++
cheers bigE
Very good tour.
Great video!!
The workers look so serious.. They need music in there or something Hope you got a box full of hawks given to you.😜
Travel broadens the fpv world 😊🌍
More of a look see of the factory, still amazing but boy just think of how cool a video would have been if able to take step by step tour on motors alone. I could see Stew and Cal were pressed for time and not in the comfort zone. Still all in all , at least we got to see how big this place is and a little idea of how the steps of product are made.
Can you imagine sitting there all day building this stuff? Would be dreadful :-(
Very interesting stu, your vlogging was very good! Not far from tv presenter!
Wow that was a great run through, it was'nt exactly how id imagined it to be! But nevertheless all very interesting! It was good of them to allow this!
Tho i am dissapointed, as i have grown quite use to you attacking cal with something being your cam man was a let off!😂😂😉 great stuff guys! ✌👍
ill double up next time on the attacks
Hi, great video, awesome. 😉
Great videos
I've made injection mold tools before they can be very time consuming to make. It takes a lot to make sure they fit together correctly and dont flash extra plastic.
those were very small blocks and only produced one or two things but still took a lot of machining time and manual labor to produce a quality mold.
The majority of the ones i helped make were large and heavy. you needed a forklift to get the blocks in a CNC mill and flip them around for every milling processes.
I reallly like Emax i use their products since early 2000s with rc planes.
And when these factories are brought back to the master/Germans there will be a mazif development and advancement... great tour.
Ohhhhh You made it made it!
Great video, wish it was more in-depth to what they were actually doing. Perhaps if there was a translator that could have helped and asked the workers!