I owned A 370 here in the north Atlantic for three years. Sold it due to three common issues throughout the lineup 1- very difficult planing 2- wet ride 3 - bounce around a lot in chop, especially in close following seas. Nice little boats but not without their design flaws.
Yellow and blue looks better colour , first time i heard of boats made in plastic , many years ago I said it be crap , seen videos on repairs ,fibre glass ,wood , not alliuminim, or steel , i would buy these boats seen it for the first time , inflatable are cool but Hole moley 😊 great view and sharing
Thanks for the question. In terms of comparing HDPE to fiberglass , HDPE generally offers better UV resistance, is lighter weight, and has better impact resistance, while fiberglass is typically stronger and can withstand higher temperatures. In terms of sunlight exposure over time HDPE is listed as being more UV resistant than fiberglass. Thanks for watching!
I have two rotomolded kayaks-one is a SAMs special and the other is expensive. If they are not stored properly, heat may deform them. It happened to one of them, and I was able to fix it with a heat gun and a lot of patience. In short, I would buy one but never leave it on the trailer exposed to direct sunlight for more than a few hours.
Uuuhhhh ..... Private Ryan was a US Army Paratrooper. 101st Airborne Screamin' Eagles ..... 🦅 You must be thinkin' United States Marine Corps Leathernecks ..... HOORAH !!!
Great question for a dealership, links are in the description below the video. I highly doubt it as they are created in a roto-mold. Thanks for watching.
Which model would perform the best for tiller operation in occasional rough water (near shore great lakes) and in the various rivers of Michigan. Been thinking about a Lund tiller but this seems safer and maybe even quieter with less power. Also how does it handle the chop compared to Lund style tiller boat? I also wonder if a jack plate might be able to be used which would really make it a river boat.
Great questions I would suggest using one of the dealership links in the description under the video to contact one of the dealership’s to get those questions answered, both Power Lodge Ramsey and Miller Marine are great folks to work with. Tell them you watched our video and have some questions. I’m sure they would be more than happy to answer them for you. Thanks for watching!
What is the boat draft? I want to use this boat in shallow bays in texas, where oyster beds exist. I had to spend $18,800 to repair damaged gel coat this past summer on my Yamaha 210fsh which has a 17 inch draft. HDPE is tough and I would not be concerned about scratching the bottom of the boat. Is there a dealer in Texas?
There are TurboSwings you can buy that go around the engine and are designed for pulling skiers and tubes. My understanding of live wells is that you put in a modular (stand alone) one that can be mounted to the floor or placed in one of the available built in spaces around the boat (ie. instead of a bench on one side, you mount a livewell). For the most up to date information contact one of the dealerships listed in the description below the video. Thanks for watching!
That depends. Owners have often changed what the boat comes with as they are akin to a portable gas tank. There are slots to fit a factory one in the transom area. To get the most accurate information on this contact one of the dealerships listed in the description below the video. Thanks for watching!
It’s in the video along with warranty info starting at 19:00. Cost starts at the 20:00 mark. For a firm # on a specific setup click on the provided links for dealerships in the description below the video. Thanks for watching!
@@viravichjuntienvara322fiberglass is definitely heavier, but plastic welding makes this a pretty easy fix with fiberglass you have a lot of time spent letting things dry, sand etc. Thanks for watching!
Polyethylene ⁉️ Can you make em from melted trash ⁉️ Those blue barrels get kinda brittle after a while. Air tanks inside ⁉️ Think I'll wait a few years and see how they hold up.🤔⚓
Basically... its a cooler shaped as a boat. Indestructible??? Uhuh... how many coolers do you see last more than a few years sitting in the sun. They get brittle!
A 1000 pound plastic boat? My fiberglass 18’ flats boat weighs less!! And was $20k 25 yrs ago. With a trailer, poling platform, yamaha 130hp and 24 volt trolling motor with batteries. That’s a HARD pass cuz that’s just nuts
Actually they’re quite durable, have been around since 2003, and are commonly used in the Caribbean and are designed to be left out in the elements. Thanks for watching
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Interesting boat and the red one looks cool.
Both the sales lady and Alan came across very well and made for a throughly enjoyable video.
Agreed, thanks for watching!
Great potential for remote property owners who haul up a beach.
Certainly is, thanks for watching!
Wow is this Tupperware's new marine division?
lol yeah
I owned A 370 here in the north Atlantic for three years. Sold it due to three common issues throughout the lineup 1- very difficult planing 2- wet ride 3 - bounce around a lot in chop, especially in close following seas. Nice little boats but not without their design flaws.
Thanks for sharing and for watching!
Do you think it would work better on a calmer lake then
@@billbones1000
Well there's your problem.
It's a boat, not a plane. 🤣👍
JK
Might be fun to see going through Haulover Inlet.
Thanks for watching!
Yellow and blue looks better colour , first time i heard of boats made in plastic , many years ago
I said it be crap , seen videos on repairs ,fibre glass ,wood , not alliuminim, or steel , i would buy these boats seen it for the first time , inflatable are cool but
Hole moley 😊 great view and sharing
Thanks for watching
That's pretty cool, I'd love to take it fishin in the Chesapeake Bay.
Thanks for watching!
It's cool but not $20,000 cool. I'll pass.
Thanks for watching
I agree 100% 20K can purchase a lot more boat than that. Nice design would have been nice for our Dive Rescue Team many years ago. lol.
@@RLoose9494thanks for watching
Thanks for saving me looking up the price 👍
Wrong whaler 16 $40'000 too $60'000
Riding with it open sounds like a lubberly practice
LOL. EYE-EYE Matey! Thanks for watching!
How about a 18’ Walleye boat I would love it.
Great idea! Thanks for watching!
Very cool.
Thanks, and thanks for watching!
Policraft boats made in Australia with distributors in US already exist with many model sizes...
Thanks for sharing!
HDPE and sunlight . How does it compare to fiberglass ?
Thanks for the question. In terms of comparing HDPE to fiberglass , HDPE generally offers better UV resistance, is lighter weight, and has better impact resistance, while fiberglass is typically stronger and can withstand higher temperatures. In terms of sunlight exposure over time HDPE is listed as being more UV resistant than fiberglass. Thanks for watching!
I could use it to get to my yacht, first I need a yacht tho
Your handy dandy skiff.
I bet its a tough boat. Lightweight. I bet it flies over the water. Might be a great boat?
It is a tough boat. Thanks for watching!
Used Triumph/Logic 12' for a fraction of the price.
Thanks for watching
I think it will warp in really hot climate. Leave it in the desery sun for a couple summers on a rrailer.
Thanks for watching
I have two rotomolded kayaks-one is a SAMs special and the other is expensive. If they are not stored properly, heat may deform them. It happened to one of them, and I was able to fix it with a heat gun and a lot of patience. In short, I would buy one but never leave it on the trailer exposed to direct sunlight for more than a few hours.
@@hcv8154thanks for sharing. I know these are used in the Caribbean and are UV treated. Thanks for watching!
Cool boat. Kinda like a whale, center console. Just needs a blown V-drive
Yes it is. The hull is shaped after a Baleen whale. Love to see it with a blown V-drive! Thanks for watching!
My first thought was Higgins boat 😂😂😂
LOL thanks for watching!
Can you get a live well in one
That’s a great question for a dealership. Their links are in the description below the video. Thanks for watching!
Yup. 5 gallon bucket. 😂
*_you could "Storm the Beach" Private Ryan Style in that mother ..._*
Thanks for watching!
Uuuhhhh ..... Private Ryan was a US Army Paratrooper. 101st Airborne Screamin' Eagles ..... 🦅 You must be thinkin' United States Marine Corps Leathernecks ..... HOORAH !!!
@@Bruno-ns7gm Not sure that’s up to to rough and tumble of Marine Corps standards. OooRah
@@Bruno-ns7gm The Marines would think its a crayon and try to eat it.
Does any manufacturer make a Modular version,that can be disassembled
Great question for a dealership, links are in the description below the video. I highly doubt it as they are created in a roto-mold. Thanks for watching.
I wonder if this boat is a spin off of the Boston Whaler?
Interesting question, definite similarities. Thanks for watching!
@@TwoGuysandaRide I have already checked for the nearest dealer to me here in Tn. I never owned a boat but one of these I my really like to buy
@ thanks for watching!
Which model would perform the best for tiller operation in occasional rough water (near shore great lakes) and in the various rivers of Michigan. Been thinking about a Lund tiller but this seems safer and maybe even quieter with less power. Also how does it handle the chop compared to Lund style tiller boat? I also wonder if a jack plate might be able to be used which would really make it a river boat.
Great questions I would suggest using one of the dealership links in the description under the video to contact one of the dealership’s to get those questions answered, both Power Lodge Ramsey and Miller Marine are great folks to work with. Tell them you watched our video and have some questions. I’m sure they would be more than happy to answer them for you. Thanks for watching!
@@TwoGuysandaRide Thanks! Will do.
What is the boat draft? I want to use this boat in shallow bays in texas, where oyster beds exist. I had to spend $18,800 to repair damaged gel coat this past summer on my Yamaha 210fsh which has a 17 inch draft. HDPE is tough and I would not be concerned about scratching the bottom of the boat. Is there a dealer in Texas?
0.25m or 10” is what the Whaly 500 R has as a draft. Thanks for watching!
Pull a tuber/skier? Livewell available?
There are TurboSwings you can buy that go around the engine and are designed for pulling skiers and tubes. My understanding of live wells is that you put in a modular (stand alone) one that can be mounted to the floor or placed in one of the available built in spaces around the boat (ie. instead of a bench on one side, you mount a livewell). For the most up to date information contact one of the dealerships listed in the description below the video. Thanks for watching!
@@TwoGuysandaRide Thanks, going to look more into this brand. Looks to be a great product!
@@jimmyers8167your welcome and thanks for watching!
"Whaly", sounds like they're trying to reference Boston Whaler aka "Whaler".
The hull is modeled after a Baleen Whale, hence the name Whaly. Thanks for watching!
How much fuel does each boat carry
That depends. Owners have often changed what the boat comes with as they are akin to a portable gas tank. There are slots to fit a factory one in the transom area. To get the most accurate information on this contact one of the dealerships listed in the description below the video. Thanks for watching!
UV protection?
Yes, technically it has better I’ve protection than a fiberglass hull. Thanks for watching!
How much for model shown????
It’s in the video along with warranty info starting at 19:00. Cost starts at the 20:00 mark. For a firm # on a specific setup click on the provided links for dealerships in the description below the video. Thanks for watching!
$13k, more or less, according to a quick Google search
...how much is it??
Pricing info is in the video and dealership links are in the description below the video.
Those things would make quite a noise banging into your big boat
Thanks for watching!
You ever seen how hard it is to brake tupperware its not the best lookking boat but it would be tuff
Thanks for watching!
How easily are they recycled
According to Whaly, they are almost as easy to recycle as taking your household plastics to recycling, so pretty easy. Thanks for watching!
Can they ship to the Philippines?
They should be able to, they ship them around the world. Contact one of the dealerships listed in the description. Thanks for watching!
Salt water?
Yes they can be used in salt water. Thanks for watching !
Great, but didnt realize plastic cost so much. Cost prohibitive. But hey, if youre happy with your sales numbers, I guess thats all that matters.
Thanks for watching!
I call BS on driving with the bow open in rough water! Maybe at very low speed it can. Either way cool boat!
Thanks for watching!
Why would you want to drive it in rough water with the bow open
@@Marine555-vz7ftnot sure why you would unless it’s being used as a rescue boat. Thanks for watching!
$8000 not bad actually
Thanks for watching!
Theres no way this will survive in the sun longer than fiberglass.
Ok
@@viravichjuntienvara322fiberglass is definitely heavier, but plastic welding makes this a pretty easy fix with fiberglass you have a lot of time spent letting things dry, sand etc. Thanks for watching!
High quality plastics can have effective UV blockers in them.
Hopefully, this is high grade.
@@bubbleringsthis does indeed have UV blockers built in, very high quality. Thanks for sharing and for watching!
@@TwoGuysandaRide If I had the money, would love one of those in Hawaii. ✅🐳🐬🐬
Looks like my kids ,Step 2 crab shaped sandbox. 😂 let's recycle all consumer waste into cheap boats and other products.
Thanks for watching!
Really!
Yep! Thanks for watching!
95K ??
Um…no, more like 20k all set up
The Titanic claimed it was unsinkable to. We all know how that turned out.
lol good point
Don't leave it in sun to long it cracks quick. 😮😮
Thanks for watching
It's a stretch to claim that hull is shaped like a whale
Agreed. I think she meant the striations on the hull
👍
Thanks for watching!
Polyethylene ⁉️
Can you make em from melted trash ⁉️ Those blue barrels get kinda brittle after a while.
Air tanks inside ⁉️
Think I'll wait a few years and see how they hold up.🤔⚓
They’ve been making them since 2001, and there are over 30,000 of them around the world, thanks for watching
Basically... its a cooler shaped as a boat. Indestructible??? Uhuh... how many coolers do you see last more than a few years sitting in the sun. They get brittle!
Thanks for watching
💓💞💕🥰😍🤩👍🙏
Right on!
Wow 20gs no way for me
Thanks for watching!
$20g'$ for 5 yrs? since theyre "practically indestructible" why arent you giving 10-15-20 yrs guarantee? Buyer beware.
Thanks for watching
A 1000 pound plastic boat? My fiberglass 18’ flats boat weighs less!! And was $20k 25 yrs ago. With a trailer, poling platform, yamaha 130hp and 24 volt trolling motor with batteries. That’s a HARD pass cuz that’s just nuts
Ok
No grab rails on the console! A real safty issue imo.
This is explained in the video, you can order grab rails etc. These boats in the video are not water ready,
After few years under the sun, it will crack and brittle away
Actually they’re quite durable, have been around since 2003, and are commonly used in the Caribbean and are designed to be left out in the elements. Thanks for watching
Over priced by. Long shot
To each his own
Too much dough for a blow molded plastic boat with a Chinese made merc motor on it,no thanks.🧙♂️
Thanks for watching
Boston Whaler's are better
Thanks for watching
20 g for a bathtub. No b'y. Hahahaa 1st time i heard of a sump pump on a boat
Thanks for watching
20k for that? LMAOOOOO no WAY!
Thanks for watching!