Dumb Questions Volume 7 - No Such Thing
HTML-код
- Опубликовано: 24 авг 2024
- Get Your American Icon Here - www.texastoast...
Get The Enduro Pickup Here - dylantalkstone...
Buy Your Gear Using This Link To Sweetwater To Support The Channel - imp.i114863.ne...
Amazon Wish List - www.amazon.com...
Our Amazon Store - www.amazon.com...
Join this channel to get access to perks:
/ @dylantalkstone
If you need the best cables ever - runwayaudio.com?ref=dylantalkstone
Use code dylantalkstone for a 10% discount
For behind-the-scenes and priority access to FAQ's, check out
/ dylantalkstone
Listen To The Podcast Here - anchor.fm/dyla...
Learn to Solder and get 2 FREE months of Skillshare!
skl.sh/2TRnbxe
Find us on the internets at:
www.dylantalkst...
/ dylantalkstone
/ dylantalkstone
/ dylantalkstone
Dylan Talks Tone Recieves Commision From Some Of These Links
Closing in on 100,000 subs. Congrats Dylan
For the dude wanting to a Princeton head and cab… try 2x10’s! It’s rowdy and has a really crazy fun midrange thing. Give it a shot. Also, I’ve done a few different ones. Low watt heads with big cabs is AWESOME!!!
If the guitar neck is sitting in a cradle it will give us a false relief reading , but if the body is flat on the beanchand the neck is not touching anything we will get a real reading
Hi Dylan, I had asked Thi’s another time but didn’t get an answer, trying again :) you measured Gauss on the pole pieces in a vid and showed that it decreases as you raise the screw. What was the comparative value with the pole piece? Thx!
I know it might vary based on the winding? But was curious
don't get the boomer hate for CNCs lol