Laser-Cut Multi-Layer CROSSES! - No Demons here!

Поделиться
HTML-код
  • Опубликовано: 17 ноя 2024

Комментарии • 108

  • @RIcklacantina
    @RIcklacantina 21 день назад

    Go Navy. Am a RNLN vet myself, 36 yeard, now retired since 2013, and just bought my sculpfun s9

  • @tresgarcia1725
    @tresgarcia1725 2 года назад +3

    Go Army! Beat Navy! ;) (thank you for your videos! and congratulations on your retirement!) 🍻

  • @Raybug
    @Raybug 2 года назад +5

    Love how easily the co2 lasers cut through fast and clean. I got into lasers during lockdown but only have a diode one at the moment that I bought to make a coin display frame.
    I'm a painter/decorator by trade and I have to say.. that painting looked painful haha.. Get yourself a small 4inch roller short or long pile you can experiment, painting those boards first or rolling the bits after the cut. That'll save you hundreds of hours over time and time is money after all. They look great though, good luck with the new business venture.

  • @ChristopherLMunoz
    @ChristopherLMunoz 3 месяца назад

    They look really nice!

  • @l.scotbradfordbradford9534
    @l.scotbradfordbradford9534 10 месяцев назад

    Really cool project. Very little burn char...

  • @borisbadinov7757
    @borisbadinov7757 11 месяцев назад +1

    Nice work. I appreciate the effort put in to your content. Well done!

  • @Certified_Art_Teacher
    @Certified_Art_Teacher Год назад

    Thank you for your service. I already like this channel.

  • @richardkarch3726
    @richardkarch3726 Год назад

    Thanks for your service!!!

  • @terrywininger9681
    @terrywininger9681 2 года назад +1

    Congrats on your new journey! Thank you for your service . Looking forward to more videos.

  • @davidlashaway
    @davidlashaway 11 месяцев назад

    Thanks!! So glad you did this video. I've been looking for a how to for these kinds of projects. Very Cool and Very Nice work. Keep it up.

  • @firefighter3b
    @firefighter3b 11 месяцев назад

    RB! Have you thought about use an airbrush to stain? You can adjust output to lightly applying stain and be easier and faster.

  • @83BlackThunder
    @83BlackThunder 2 года назад +2

    Those crosses look amazing. I’m looking forward to see more of your laser projects.

  • @hassenzouari2479
    @hassenzouari2479 3 дня назад

    Awesome Thank you

  • @MakingLemonadeCreations
    @MakingLemonadeCreations Год назад +1

    I make these same crosses. Highly suggest using 3M double-sided adhesive (except for the back piece of course). Makes life soooo much easier. I also prepaint my boards and it is such a time saver.

    • @phototec
      @phototec Год назад +1

      MaWoodShop is no longer selling the cross files on Etsy, where did you purchase your files? Thanks

    • @jtlos
      @jtlos 11 месяцев назад

      I was just looking at the 3M tape. Looks like it's about $350 for a roll. Where do you get yours?

    • @MakingLemonadeCreations
      @MakingLemonadeCreations 10 месяцев назад

      @@phototecthat is where I got my files. You might google search to see if they set up their own website.

  • @ngahinamcgrath7876
    @ngahinamcgrath7876 Год назад

    Love them good job

  • @terryh5677
    @terryh5677 2 года назад

    Very Cool great job brother. Liked and Subscribed!

  • @prpman99
    @prpman99 2 года назад

    Won't hold the Navy service against you...from a retired USAF type. 😁 Just came across your channel. Purchased a laser for my shop also, although a much smaller one. Looking forward to trying out some of these projects. Have had a woodshop for a number of years. Maybe you have already conducted a tour of your shop but if not would be interested in seeing your set up. Thanks and keep them coming.

  • @SawdustmakerLori
    @SawdustmakerLori 2 года назад

    Crosses are gorgeous! Congratulations on starting your own woodworking business. Best wishes!!!

  • @cathymyers7831
    @cathymyers7831 2 года назад

    Love these crosses. Great colors!

  • @chuckdaddyo
    @chuckdaddyo 2 года назад

    Good content and congratulations on going full time on your woodworking business, hope to there some day. My wife and so just got a Thunder Nova 24.

  • @pfiltz
    @pfiltz 5 месяцев назад

    Hi there. Great vid. I've looked on Amazon, but can't find tinted stains like you have...

  • @jariase2011
    @jariase2011 Год назад +1

    Wonderful job. Check, what kind of wood do you use for your work? Greetings from 🇨🇱

  • @goshko102
    @goshko102 9 месяцев назад

    Hi, everything is brilliant. I just failed to understand how you got the cross separated to different layers. Would be thankful for some insides.

  • @oldNavyJZ
    @oldNavyJZ 2 года назад

    Last comment - maybe - but wanted to also say I really like the ones with the very close colors - especially because of the way it reacts different to viewing angle/light. Nice job!

  • @BeamSmith-xo6ws
    @BeamSmith-xo6ws Год назад

    crosses looking great.i would say design your own and sell this staff.yes designing takes time and money but then you learn a lot.My favorite is the cross with the red and white color.this color combi looks really good.the others looking great as well but i would give them multi colors as well.

    • @heathergardner3028
      @heathergardner3028 Месяц назад

      i see it's been awhile since you made this comment so I hope you'll still see this! Can you suggest a starting place for learning how to design stuff to sell?

  • @AverageOverlander
    @AverageOverlander 2 года назад

    Welcome back shipmate, I missed ya.

  • @inc55
    @inc55 Год назад

    How come your cuts are so clean? No burn marks anywhere. What kind of laser do you have?

  • @rone-g1i
    @rone-g1i 10 месяцев назад

    Just watched your video. Ma woodworking must went out of business. Who else could you recommend laser files?

  • @BBQGuru1008
    @BBQGuru1008 2 года назад

    I've had my Thunder 51/100 for about 10 months now and it's been an amazing tool! Nice job on the layered crosses, I sold a bunch of nativity scene layered crosses for Christmas this year. Keep the videos coming.

  • @terranceweis5231
    @terranceweis5231 Год назад

    Those look awesome. I'd love to see the review on the thunder laser. I've been researching them for a while.

  • @chrisoliver3851
    @chrisoliver3851 3 месяца назад

    Just stumbled on to your channel, nice work. Looks like a lot of time making these. How much are you asking for these?

  • @wa2ukp
    @wa2ukp Год назад

    Great Job. One question, How are you hanging them? I don't see any slot or thing on the back??

  • @wilsonng911
    @wilsonng911 Год назад

    Have you tried hard printing roller to stain the pieces rather than the foam brush??

  • @Darkechilde
    @Darkechilde 2 года назад

    Nice work! I wonder if an airbrush wouldn't work well for this.

  • @estelitapolverari5376
    @estelitapolverari5376 Год назад

    Mas não mostrou como fez! E a ordem da montagem, as etapas…já está incluído no programa ou em um aplicativo? Muito lindo tudo e você é um artista! 👏🏻👏🏻👏🏻

  • @cut_out34
    @cut_out34 Год назад

    Ohh very nice job! what kind of wood did you use and is it real that acrylic paint is the best of kind?

  • @lylebrown6132
    @lylebrown6132 2 года назад

    the link to get the designs is no longer on etsy. would love to get them, but thank you for your service to our country, and thanks for the video.
    God blgess

  • @mr.whatsnext8413
    @mr.whatsnext8413 Год назад +4

    I just clicked onto the link and it said not currently selling on Etsy. 07-02-23

    • @AntonyGladson
      @AntonyGladson 2 месяца назад

      Yes, looking around to find some place to get those same designs

  • @truetech4158
    @truetech4158 7 месяцев назад

    Can't seem to have hypersonic missiles without belief systems, you noticed that too?

  • @horaciocreativo
    @horaciocreativo 6 месяцев назад

    thanks for your videos! and congratulations a consulate where you get the designs
    I am from San Juan Argentinian, it is very difficult for me to get them THANK YOU
    If you can share what I get I will share it with you BLESSINGS

  • @Marcelo_ricarttis_37
    @Marcelo_ricarttis_37 2 года назад

    show de bola,👍👌👌🥰🤗é muito lindo esses trabalhos

  • @estelitapolverari5376
    @estelitapolverari5376 Год назад

    Que lindas! 😍😍😍🤩🤩🤩👏🏻👏🏻👏🏻👏🏻👏🏻

  • @str4nge764
    @str4nge764 Год назад

    Wouldnt it be easier to use a rubber roller to apply stain like that? Something that is dense and lightly coated wont go into cracks like a sponge

  • @angelmom916
    @angelmom916 Год назад

    Bummer…They are not selling on Etsy….Any clue if they are anywhere else?

  • @Mamuti_Skins
    @Mamuti_Skins 2 года назад

    link 4 buy the file dont work!

  • @TheDraco621
    @TheDraco621 2 года назад

    what machine are you using specifically?

  • @ThrooGRV
    @ThrooGRV Год назад

    what wood are you using? I'm new to this :D

  • @JaspalSingh-go6db
    @JaspalSingh-go6db 8 месяцев назад

    So nice work how to download file

  • @designareleizer2055
    @designareleizer2055 Год назад

    What speed and power did you use tu cut them?

  • @Original_Waterboy
    @Original_Waterboy 10 месяцев назад

    is there generator software to create the layers out there that is free?

  • @LarryDMitchell
    @LarryDMitchell 2 года назад

    Did you etch your Maker's Mark on the back with your contact information? Good video. What was the demographic that purchased the crosses? Just curious.

  • @Shakalowski
    @Shakalowski 11 месяцев назад

    13k $ nice...what i should buy for 900$ for start?

  • @carvedwoodartco1690
    @carvedwoodartco1690 2 года назад

    Im just starting outi have a problem with the line and fill how do you cut out the filled lines

  • @13janart47
    @13janart47 2 года назад

    Can you give me the name of the paintbrush you use? thank you

  • @parker1ray
    @parker1ray 2 года назад

    The Etsy page that you have a link to is closed!

  • @Mark-ob8nh
    @Mark-ob8nh Год назад

    What was the name of that glue please. Thank you

  • @semperidem2577
    @semperidem2577 2 года назад

    What size lens are you using on your laser? The sides of those cuts look pretty perpendicular to the front surfaces. I seen some stuff that has been cut and the sides are not smooth at all because the cuts are at a very slight angle.... doesn't show when cutting individual items much but as soon as you start layering things they stick out a mile.

  • @gthmcty111
    @gthmcty111 2 года назад

    Great video, and congrats on your retirement former Marine here.
    What stain are you using? I have tried to find the brighter colored stains and have been having little luck.

    • @jonsaircond8520
      @jonsaircond8520 2 года назад +2

      Minwax has stains that can be tinted to some very bright colors. They have a solid and transparent one. I use the transparent that will look solid if brushed on left to dry or you can wipe off for a muted look

    • @gthmcty111
      @gthmcty111 2 года назад

      @@jonsaircond8520 thank you!

  • @pablomoreno7777
    @pablomoreno7777 Год назад

    Why you clean the paint after paint the layer?

  • @simonchambers3900
    @simonchambers3900 2 года назад

    Hi, you get a very clean cut. Very little surface residue. Can I ask what power tube have you got in your laser and what power/speed setting are you using.

    • @rbwoodcreations1039
      @rbwoodcreations1039  2 года назад +1

      It's a 130w tube and I usually run around 65-70 power and around 50mm/sec. I have shop air, so I use that for the air assist (~40psi)

    • @simonchambers3900
      @simonchambers3900 2 года назад

      @@rbwoodcreations1039
      Thanks for the reply. I have a 150 watt and run at similar setting. I don't have the upgrade on the air assist. I think this is worth looking into.

    • @rbwoodcreations1039
      @rbwoodcreations1039  2 года назад +2

      @@simonchambers3900 getting the air up to 30-40 psi makes all the difference when cutting

  • @jackhelm9852
    @jackhelm9852 2 года назад

    Just curious if you have tried to do the prestained wood before cutting and how the laser reacts with the stain?

    • @rbwoodcreations1039
      @rbwoodcreations1039  2 года назад

      That's all I do now. Stain/paint, mask, then laser. Works like a charm.

  • @johowohoj
    @johowohoj Год назад +1

    Curious how much you might sell these for…?

  • @resurrectedrenditions5017
    @resurrectedrenditions5017 Год назад

    I've had my Nova 51 for over a year and am just now getting my courage up. I have a mutli-layered design I want to do but I'm not sure where to start. I see you have a line and a fill layer. My design has 5 layers but I am not sure how to even start with the set up. So overwhelming.

  • @tjbel1253
    @tjbel1253 2 года назад

    will a regular smaller hobby diode laser like a Neje or Ortur do these?

    • @iwannaapple7190
      @iwannaapple7190 2 года назад +1

      He has a large CO2 laser so he might or might not know. However, he is only cutting 3mm wood and I have seen both the Ortur and the Neje diode laser cut 3mm wood especially with air assist. The best air assist nozzle I have seen is sold as an add on for the foxalian. The same guy that does it for the foxalian also sells for other manufacturers on Etsy. I also like the air assist pump that they came out with just for his air assist. He makes his out of brass and not plastic. I've seen his demo cut up to 10mm

  • @owatagi
    @owatagi 2 года назад

    Where could I buy one?

  • @oldNavyJZ
    @oldNavyJZ 2 года назад

    Mirroring is quicker - just mirror BOTH horizontal and vertical and it ends up with a 180 degrees.

  • @allengeist5481
    @allengeist5481 Год назад

    Holy crap I have a laser cutter but I gotta know how much that one cost please

  • @SchizSchool
    @SchizSchool 2 года назад

    Can you still smell the wood cutting with your ventilation system on?

  • @magicmanj32
    @magicmanj32 2 года назад

    Etsy shop not currently trading

  • @stevespringer8385
    @stevespringer8385 2 года назад

    why not pre-paint all the pieces before cutting them out? seems like it would save a lot of time.

  • @minravex9919
    @minravex9919 2 года назад

    Sir can u do paid layer design ?

  • @mysticalaelfheah5475
    @mysticalaelfheah5475 2 года назад

    14:01 The Red and the Blue crosses would look nice with a single layer of metallic Bronze or Gold paint too. 🙂

  • @eletronicosbr1517
    @eletronicosbr1517 Год назад

    Já fez algum projeto com rosto ?

  • @LumberZack
    @LumberZack 2 года назад

    Those turned out neat! How long did they take to cut out and at what price range were you able to sell them? Just ordered a CNC with laser and would like to try these.

    • @rbwoodcreations1039
      @rbwoodcreations1039  2 года назад

      Cut time was about 15 minutes on the laser and selling the first few for around $50-60.

  • @jbouza09
    @jbouza09 2 года назад

    Not bad for a Navy guy 🤣🤣🤣

  • @truthseekers77
    @truthseekers77 2 года назад

    How do I get those cut files
    That person is not on etsy anymore

    • @rbwoodcreations1039
      @rbwoodcreations1039  2 года назад

      If you Google MaWoodShop it should come up on the search results. They sell their files on another site now.

  • @mikelacey9753
    @mikelacey9753 9 месяцев назад

    Wouldn’t it be better to spray these multiple layer projects?

  • @biotechnologistagri1916
    @biotechnologistagri1916 2 года назад

    What is the price of this printer?

  • @printpoint2820
    @printpoint2820 2 года назад

    You sell this type of designs

  • @Nickelling
    @Nickelling 2 года назад

    What software do you use?

  • @barretthamilton2565
    @barretthamilton2565 2 года назад

    Ma Woodshop is not longer an Etsy store

  • @elizabethbarnett5781
    @elizabethbarnett5781 Месяц назад

    your audio cuts off at 4:22

  • @AndreyIshin
    @AndreyIshin Год назад

    hi!! great job!!! let's do a collaboration?

  • @karlriley1314
    @karlriley1314 2 года назад

    Can't you just use a spray can with the color that you want??

  • @IliaDevaltovskii
    @IliaDevaltovskii 9 месяцев назад

    inch/imperial system so stupid
    3, 4, 5, 6, 7, 8mm - more easyer.

  • @modernera777
    @modernera777 2 года назад

    I hope you like the second commandments that says not to make idols or images of heavenly objects.