I have no idea why this video is so therapeutic. Very relaxing and satisfying to see the bucket overfilling the trucks while being fast and efficient. This guy needs a raise.
That’s the largest bucket for that machine. 13.5 yds. Coal bucket. This machine has a 27 liter V 12 engine. Four hydraulic pumps and another pump moving two swing motors. It’s fast. It’s efficient. The operator is good at his job.
buenas noches yo israel ramos de apodaca n.l soy maquinista y me encanta ver todos los videos de maquinaria pezada saludos y hrasias espero pongan mas videos
It’s kind of sad how critical some are of the operator with their presumptive commentary when they in no way know the standing directives under which he is working. It is obviously a high volume operation which places a burden upon the operator in a rather rapid dump and go situation to keep things moving along. As a result things aren’t going to be pretty and likely aren’t meant to be, but product is kept moving at an incredible and seemingly unrelenting pace. Happy not to be in the operator’s seat for 8-12 hours a day at that rate. Enjoyed the video!
He has over spill because of the size of the trucks he's doing very well keeping up with turn around time plus he was probably told to load heavy do to the size of the trucks to be more efficient bigger excavators have to be handled with care one small mistake can destroy one of those trucks or kill someone plus with bigger buckets you have to try to spread the material throughout for even hauling and dumping he is doing a fine job
@@dietermontanez6576 And you are qustioning peoples opinion and you say something dumb like that. They AREN'T going on the highway those are the trucks that are common in the area. If you can prove you have seen more heavy equipment run then I have I will respect your opinion And when I was operating equipment there WASN'T youtube.
Dieter Montanez you need to watch more of this channel. They DO run some haul trucks, and they also run some equipment bigger than this new Cat. The mine is enormous and the coal seams vary in size and location and conditions. As a general statement, it seems like the equipment assigned to a cut reflects all three of those parameters
I always see comments on videos like this where people are shitting on the operator but the way I see it those people might not know what they are talking about. I'm sure that machine is stupid expensive and if its not operating full tilt 100% of the time they are losing money. Spending the time to very carefully drop a load into a truck might cost the company more money then fixing the trucks more often. Its all about cost and the way I see it he has to go this fast because hes got a constant line of trucks waiting on him and if he slows down at all they are going to start pileing up pretty quick.
The problem is the operator is handling half of every other bucket twice, which is just wasting fuel and time. It looks like each truck can haul 1-1/2 buckets, the operator would be more efficient putting the half a bucket he / she spills on the ground every other bucket into the next truck instead.
Seems to me it would be cheaper, and perhaps faster to use a smaller machine. Say a machine with a bucket 75% of this size. 2 full buckets on each truck. Faster, easier on the equipment, and at a much lower cost.
@Grammar jew maybe but again. That's not an operator error that is a higher up error. Not saying there aren't problems and to be honest I really don't know anything about this subject. I can operate a cat 330D but that's the largest machine I've ever used and that was a special occasion. Most the time I'm using a mini ex for electrical work and I can tell you now this guy goes a lot faster than I do. Not really saying much but I feel like he's just doing as he's been instructed to do.
Those trucks are getting BOMBED, 2 bucket loads with #2 overflowing about 20%. I hope they get bigger trucks so they are not wasting 20% of the work anymore..... Awesome machine, I hope it earns the company some $$$ once the ki9nks are ironed out.
Guys n Gals, I know it looks bad, but look at what’s being thrown at him, he’s got like a 8-10 second turnaround. We all know he needs bigger haul trucks, but it appears they don’t have any. I’m guessing the powers to be are Happy this rig is taking care of 12-15 trucks with a 10 second load out.
Broken suspensions, axles, and bent tailgates are an everyday thing here, not to mention bouncing the drivers head against the roof of the truck with the first bucket.
Non avevo ancora visto caricare i quattro assi con due Bennate sole, e che dose che gliene metteva😂, macchina impressionante, molto veloce nei movimenti tra l'altro
average time per lorry is less than a minute. that would be around 50-60 lorries per hour if the pace continues like that. and it will be around 400-450 lorries per 8 working hours. its amazing ya the coordination 👍
Isn`t this a bad match? The excavator is to big to be practical in loading so small trucks. The amount of spill is ineffective. The operator does ok in making fast cycle times, but cant keep it tidy. Must be hard on those trucks.
@@tfi6279 Maybe so, but it would be more efficient, and alot easier on the trucks with less spill. He needs two cycles on every truck anyway. If they chose a machine that could dump two full buckets on each truck, it would be cheaper to run, easier on trucks, and since it would probably be a smaller excavator, probably alot faster, even with taking the timeto be more precise..
I get what your saying. I used to be like that. I would fill in and run a 345d loading 740s . The kid in the 345b was smoking me slinging dirt everywhere. And he had a higher truck count. I had an inspector on site verifying he was moving more dirt.
Amigos o operador é bom mas só um reparo, quando ele acaba de carregar um camião devia logo carregar o balde do mesmo lado e depois ai sim rodar para o outro lado para carrega novamente abraço
Mucho lo llena al balde para después ramar . Debería llenar exacto y llenar al camión exacto también y falta un poco más de cuidado al vaciar a los camiones esta que los maltrata.
Nice video of 6015 loading coal 👍👍👍
Top
Best driver
I have no idea why this video is so therapeutic. Very relaxing and satisfying to see the bucket overfilling the trucks while being fast and efficient. This guy needs a raise.
٢ش
what a massive bucket
Nice cat 6015B
Only two buckets so satisfying
so nice heavy equipment forever that i never see before in Cambodia,,,
Heavy Duty Operator, bad boy!
This operator is worth their weight in gold.
Magnific machine!
عمل ممتاز تحية لسائق الحفارة 👍✌️✌️✌️
I think his a good operator , dont see anything wrong with his work
Show de bola produção na Alta parece ser uma boa profissão
48s một xe nhanh thật
Gầu con này to hơn gầu con cat 6020b
He must be one of the happiest persons in the world. Child dreams come true :-)))
Your profile pic XD
I don't know why but that was very entertaining to me
Bxx
I love excavator so much that I have to work one
That’s the largest bucket for that machine. 13.5 yds. Coal bucket. This machine has a 27 liter V 12 engine. Four hydraulic pumps and another pump moving two swing motors. It’s fast. It’s efficient. The operator is good at his job.
Dang thats like one pump per cylinder
Boa noite Muito ótimo esse serviço máquina meu amigo
Just like Raisin Bran , two scoops in every box . . . . . .
so true
LoL
buenas noches yo israel ramos de apodaca n.l soy maquinista y me encanta ver todos los videos de maquinaria pezada saludos y hrasias espero pongan mas videos
I wish i could also get a coal work like this!!!
Coal is light but the hydraulics of that machine are very quick, for such a large machine. Those trucks are obviously not going over the road, lol.
Cómo están. Ya mero. Acaban. De. Travagar
It’s kind of sad how critical some are of the operator with their presumptive commentary when they in no way know the standing directives under which he is working. It is obviously a high volume operation which places a burden upon the operator in a rather rapid dump and go situation to keep things moving along. As a result things aren’t going to be pretty and likely aren’t meant to be, but product is kept moving at an incredible and seemingly unrelenting pace. Happy not to be in the operator’s seat for 8-12 hours a day at that rate. Enjoyed the video!
Best comment yet here - tis indeed a high volume operation, speed is the essence not tidyness
A
Hzl
)Qd
Jcb
He done did good
Professional 👍👷
Operator is a animal ,the bucket ever full
👌👌👌عالی بود
He has over spill because of the size of the trucks he's doing very well keeping up with turn around time plus he was probably told to load heavy do to the size of the trucks to be more efficient bigger excavators have to be handled with care one small mistake can destroy one of those trucks or kill someone plus with bigger buckets you have to try to spread the material throughout for even hauling and dumping he is doing a fine job
Mantap
271
6015b needs bigger trucks to work with so at maximum efficiency. That my opinion
as you can see on the far the trucks have to pass public roads so probably big gear like 777 are not allowed.
@@dietermontanez6576 And you are qustioning peoples opinion and you say something dumb like that. They AREN'T going on the highway those are the trucks that are common in the area. If you can prove you have seen more heavy equipment run then I have I will respect your opinion And when I was operating equipment there WASN'T youtube.
Brian Gardiner why don’t u
Dieter Montanez you need to watch more of this channel. They DO run some haul trucks, and they also run some equipment bigger than this new Cat. The mine is enormous and the coal seams vary in size and location and conditions. As a general statement, it seems like the equipment assigned to a cut reflects all three of those parameters
I think so too🤔 that this trucks are too small for the Cat.
Sooo cute 😋😊🤣
Ajarin saya bang bawa exavatornya bang supaya saya bisa kerja sama dengan abang dan dengan perusahaan bang
Cat 6015 СУПЕР 👍👍👍👍👏👏👏
Ótimo vidio 👏🏼👏🏼👏🏼
Awesome machine and operator!
Now that is the way to load a truck.
Muito lindo ver essa escavadeira trabalhando show de operação.
Meu entretenimento preferido.ver esses vídeos
Those trucks looks so cute and tiny next to that ginormous digger!
Damn I hope they have a washer plant to get rid of all that rock
👍👍👏👏👌👌
รุ่นนี้หล๊ะแรงดีเพิ่มมือยาวหน่อย ( SCG บางซื่อ )
Escavadeira linda com duas conchadas enche o caminhão de quatro eixos
Holy shit he's smooth AND fast!
cool clip, keep them coming
I always see comments on videos like this where people are shitting on the operator but the way I see it those people might not know what they are talking about. I'm sure that machine is stupid expensive and if its not operating full tilt 100% of the time they are losing money. Spending the time to very carefully drop a load into a truck might cost the company more money then fixing the trucks more often. Its all about cost and the way I see it he has to go this fast because hes got a constant line of trucks waiting on him and if he slows down at all they are going to start pileing up pretty quick.
The problem is the operator is handling half of every other bucket twice, which is just wasting fuel and time. It looks like each truck can haul 1-1/2 buckets, the operator would be more efficient putting the half a bucket he / she spills on the ground every other bucket into the next truck instead.
Reegareth - Totally agreed
No, he just sucks, there is so much here that he could do better and be much more efficient with
Seems to me it would be cheaper, and perhaps faster to use a smaller machine. Say a machine with a bucket 75% of this size. 2 full buckets on each truck. Faster, easier on the equipment, and at a much lower cost.
@Grammar jew maybe but again. That's not an operator error that is a higher up error. Not saying there aren't problems and to be honest I really don't know anything about this subject. I can operate a cat 330D but that's the largest machine I've ever used and that was a special occasion. Most the time I'm using a mini ex for electrical work and I can tell you now this guy goes a lot faster than I do. Not really saying much but I feel like he's just doing as he's been instructed to do.
2 gàu đầy xe 4 chân 25 khối vãi thật sự
Binh Nguyen rớt ra ngoài 5 khối nữa
Binh Nguyen gầu còn này 13 khối
Big Exscavater
Those trucks are getting BOMBED, 2 bucket loads with #2 overflowing about 20%. I hope they get bigger trucks so they are not wasting 20% of the work anymore..... Awesome machine, I hope it earns the company some $$$ once the ki9nks are ironed out.
Great operator!!......is it just me or is that machine fast as hell?????
He was flying
A 27l v16 helps too
Or a 27L V12 even 😁
Guys n Gals, I know it looks bad, but look at what’s being thrown at him, he’s got like a 8-10 second turnaround. We all know he needs bigger haul trucks, but it appears they don’t have any. I’m guessing the powers to be are Happy this rig is taking care of 12-15 trucks with a 10 second load out.
Would love to know the tons per hr. Thats a truck loading son of a gun now.
Parabéns
Saludos cordiales MMC desde Sudamérica Santa Cruz bolivia 🇧🇴 excelente okey 👍 👏 👏 el video 📹
Essa escvadeira é top ! Em duas braçadas ja enche o caminhão
I also drive an excavator but I've never seen such a nest machine.
It's so relaxing to watch the cycle times go by.
When you can load a truck with 2 buckets you are doing your job. having 2 trucks to load and more waiting in line makes for better production.
Sdbdbfhfj
Sgxfgxnfdhrhgffdhj
super cat 👌👌👍👍
Como para q llenar tanto el bote si el exceso de material es el q tira, trabajo sucio!!!!
Me gustaría saber cuántos metros cúbicos agarra el camión y cuántos el cucharón???? Gracias que amables y saludos desde Los Mochis Sinaloa México.
Aapretar puneeth kumar of India 🇮🇳
Broken suspensions, axles, and bent tailgates are an everyday thing here, not to mention bouncing the drivers head against the roof of the truck with the first bucket.
TheSoloAsylum looks like coal... weighs a lot less than clay or shale.
Smooth operator, hits his target every time with grace.
Love the CAT 6015B!!! What a monster!
Awsome!!!!!
Am interested in the loading so far, i will like to join this company.
Non avevo ancora visto caricare i quattro assi con due Bennate sole, e che dose che gliene metteva😂, macchina impressionante, molto veloce nei movimenti tra l'altro
I wounder how much fuel that baby burns in a shift any guesses
Os motoristas estão mais entrosados que time de futebol 👏👏
Os motoristas sim, mais o operador não, está soltando cada mataco na caçamba pelo lado de fora.
Exelente loguistica
I want this guys job lol
Nice I love the catapiller videos
Easy diggin’
average time per lorry is less than a minute. that would be around 50-60 lorries per hour if the pace continues like that. and it will be around 400-450 lorries per 8 working hours. its amazing ya the coordination 👍
Puny little trucks
777s on the bottom would up production 300%
1 múc chắc phải gần 20 khối
Mostruosa maquina com duas conxadas enche o caminhão operador encje ate o talo os caminhões kk
Show de bola ⚽
Türk varsa 💙atsin
Si tuvieras un tajo duro no ibas ir tan sobrao.Carga vien.🥶
That's a big bucketful at 00.40.
NOW THATS PRODUCTIVE !FUCK THE OVERSPILL !
Isn`t this a bad match? The excavator is to big to be practical in loading so small trucks. The amount of spill is ineffective. The operator does ok in making fast cycle times, but cant keep it tidy. Must be hard on those trucks.
Grammar jew nope this is textbook. Your gonna spill some when your swinging dirt that fast.
@@tfi6279 Maybe so, but it would be more efficient, and alot easier on the trucks with less spill. He needs two cycles on every truck anyway. If they chose a machine that could dump two full buckets on each truck, it would be cheaper to run, easier on trucks, and since it would probably be a smaller excavator, probably alot faster, even with taking the timeto be more precise..
I get what your saying. I used to be like that. I would fill in and run a 345d loading 740s . The kid in the 345b was smoking me slinging dirt everywhere. And he had a higher truck count. I had an inspector on site verifying he was moving more dirt.
Grammar jew f
Только отлетают!
Weely weely goood machine and goood job
❤
막 퍼담네 두번이면 다차고 바켓트가 도데체 얼마나 큰거여
Caramba 😨 só com duas conchas já enche uma caçamba de caminhão tbm a concha é enorme slc escavadeira monstruosa parabéns
Caraca trabalho com uma cat 336 já acho que é um monstro imagina essa se elouco
Máquinas que solo verlas enamoran, que línea xd😍👍
Saludos desde España, buenos videos 👌
Juan Izquierdo .
Watched several times! but i'm not bored, this video is awesome
Cau 5faafgs
Proper muck shifters know how to shift muck, so keyboard muck shifters can do one
In in UK; wax
clean coal, clean coal....
Amigos o operador é bom mas só um reparo, quando ele acaba de carregar um camião devia logo carregar o balde do mesmo lado e depois ai sim rodar para o outro lado para carrega novamente abraço
MEGA🥉🥉🥉
Mucho lo llena al balde para después ramar . Debería llenar exacto y llenar al camión exacto también y falta un poco más de cuidado al vaciar a los camiones esta que los maltrata.
Concordo com vc