I am sure you can too but it still doesn’t keep the paint on because there is so much friction. If you know of some that doesn’t come off and stays clear when applied, please give me the sauce! 🤩 @Astronautkid
Never use mod podge bc if it rain, thats going to mess up the glitter. I use light even coats of E6000 glue. That way if it rain, the glitter is not coming lose. Just some e tra tips
Maybe a couple thin spray coats of clear flex seal. The flex leaves a rubberized coating and probably can be cleaned and touched up as needed, potentially keeping the red pristine looking 🤔
Yo bro check out "Liquid Kicks" (Scratch Protection) and use that on your shoe soles to keep your red bottoms from coming off. Nice custom work though!
It is still perfect. I used sole protectors. I did make another pair without the protectors, just to see how long it would last, and it came off after one day.
I seen some people paint the bottoms and immediately thought NO lol it does look dope but sucks when you're walking and it comes off. I wish they had paint for soles but nothing has come to light just yet. The only thing I can say to use to help even more are sole protectors. Other than that dope custom 💯
First, acetone the shoe to get the factory finish off. You don't have to sand the shoe but I sand the shoe because the sanding removes more paint and it creates abrasion on the surface of the shoe for the new paint to stick to. You can sand as long as you need to, just don't go overboard and damage the shoe. Once you start to see scuffs on the shoe you're most likely good to go in that spot. You've gone too far if you start to see leather peel. lol
My grommet tool is on setting. It’s 3/16 of an inch. So first I used punch pliers to make the eyelet hole big enough, then, came back with the grommet tool to install the gold grommets.
It’s durable…for light walking…but I would do it a little different next time and only apply 1 or 2 layers. Overtime, when doing big city walking, I did get some cracking and flaking. The initial coat stayed perfect though, which lets me know that the extra costs aren’t really needed.
No prob at all. Thanks for the engagement. If you really like my videos, please SUBSCRIBE! We are trying to reach the BIG 1,000 SUBS! Lmk how your shoes turn out!
I just finished a custom with the angelus glitterlites, its not as prominent in glitter, but i think using it as the base instead of modge podge can work and tyen adding the glitter on top.
You did a great job but y'all doing to much. You making your work harder by sanding your sneakers. The sneakers don't have to be sand down but i do use acetone to take the factory finish coat off and thats all you have to do. Also, press your glitter into your glue. Take a paint brush to knock off or brush the excess glitter each time you put a layer of glitter. Once finished and glitter is dried, then take a toothbrush and brush off the excess glitter. Do not spray a sealer bc it takes away the shine or sparkling away. Just some tips to help you along the way.
This video was hard to watch. No idea how to use an airbrush. And WHY IN THE HELL did you use a silicone sculpting tool to apply the mod podge? The red is coming off 1st time you wear em.
Thanks for your comment. If you feel like you can do a better job the first time you make some, then feel free to make a video and show the world how. I used a silicone brush because at the time of making this video I didn’t have any bristle brushes on hand. Again, if you feel like you know how to yield an airbrush, make a video and show the world how with your expertise. Otherwise, 🤐. To this day, this is one of my most watched AND liked videos on my channel. Would I do a lot of things different a second time around? Yes. But that’s the whole point of learning and growing. Maybe you should try it. Any shoe that has a painted bottom will eventually wear off the first time you wear them…that’s why sole protectors were invented. Watch the next video and learn how to apply those. Nobody forced you to come to the channel and watch, but I appreciate the watch time hours you gave me. 😃
I can handle constructive criticism. The community is about learning and building. I put out a video to help people. You didn’t like it. You came with energy that didn’t match the video or channel, asked questions and I still answered them. Your critique gave no value to me or anyone who read your comment. So to help my viewers I suggested that you show me how to yield an airbrush if I have no idea how to, I answered your question on why I used a sculpting tool, and educated you about Sole protectors to keep paint from wearing away and suggested you watch my video on that. Seems like a good response to your critique to me. Sounds like you need to be willing to accept the return of what you dish out if you’re going to be critical. 😃
@CustomFeens you soft homie. But good luck. Might want to learn before you teach. Showing people the wrong way doesn't help anyone. You are leading people to believe you can paint soles. No disclaimer.
@tat2dchad soft lol, coming from somebody who is calling me soft through a comment online. It’s a little more challenging face to face. Boy keep it moving. If you aren’t intelligent enough to know that paint will rub off the bottom of a shoe if you paint it that’s your problem. Lol. Scram.
Music is horrible. You should’ve did the video. I just talked all the way through it. Stella use that horrible music thumbs down bra and I’m from Detroit.
Yea, well if you’re from Detroit, do better. The only thing understandable about your comment is “Music is horrible”. Everything after that make absolutely no sense. And if you don’t like the music, make some, and maybe I’ll feature your trash ass music in one of my videos. The page and this video is about teaching how to customize shoes, not make music. You gave a thumbs down because of the music and not the value of the video. Stop hating, you’re a crab and it’s sad you are from Detroit.
Wow!!! Nice face lift… I really like what you did to the all black Air Force 1. Now that’s talent👍🏾
Thank you so much! Please subscribe if you haven’t already! I’ll be posting more videos like this weekly! Peace and love!
Now THIS is a job well done!
Thank you so much! Please subscribe if you haven’t already! I’ll be posting more videos like this weekly!
Real work of art!!
Thank you so much! Don’t forget to subscribe if you haven’t already! Peace and love!
My boy Tay is talented! High Quality work. Can tell he's passionate about his work. Keep bringing that 🔥💪🏾
Appreciate the love my brother!
Truly amazing at what you do!!!!! Love love love these !!!!!!
Thank you so much, Kishia! More videos coming soon!
Very informative!! Thanks for not gatekeeping. #BlkA1s
No problem at all! Just spreading the sauce! Peace and love!
great video man
Thanks bro. Appreciate you watching! Please make sure you’re subscribed, I have more coming!
Great job, Tay! Needed these for New Years fit 🔥
Thanks, Kelly! Valentine’s Day is coming up!!!…🤩
Angelus has a red bottom paint called Walk on red.
Sweet! I’ll look it up! 😊
These look great! Will white or other colors turn out just as well? #customsneakers
Yes! Actually, I will soon be posting a video making an All White Pair of AF1s!
This man neeed to be famous
Thanks a lot! You’re a real one!
Ypsilanti in the building/ just now starting my own customs Nice work bro
Ayyee! Thanks a lot, and best of luck on your customization journey!
Those look fire my boy.
Appreciate the love! 🔥
bro i don’t know but i think u can use clear sole protectors so that the paint doesn’t come off
I am sure you can too but it still doesn’t keep the paint on because there is so much friction. If you know of some that doesn’t come off and stays clear when applied, please give me the sauce! 🤩 @Astronautkid
new to customizing, and your video helped a lot great job keep up the great work
I love to hear it! Good luck on your customizing journey!
Never use mod podge bc if it rain, thats going to mess up the glitter. I use light even coats of E6000 glue. That way if it rain, the glitter is not coming lose. Just some e tra tips
Can I order a pair?
Contact me on Instagram. DM me and let me know you’re coming from RUclips. @customfeens
They sell paint made for the bottoms, same brand as the paint you using now. Never used it but I was gonna check it out
Tje nike tick logo on the sides was fit to be painted gold too
Maybe a couple thin spray coats of clear flex seal. The flex leaves a rubberized coating and probably can be cleaned and touched up as needed, potentially keeping the red pristine looking 🤔
That may work for the red bottoms. I’ve never tried. I just use clear sole protectors.
Yo bro check out "Liquid Kicks" (Scratch Protection) and use that on your shoe soles to keep your red bottoms from coming off. Nice custom work though!
Thanks for the sauce! I’ll defiantly give it a try!
No problem bro
It will still peel off.. The paint material is not meant to go on pourus surfaces
@@indiancarter601 I’m not sure what you’re referring to…the paint or liquid kicks??
@@CustomFeens liquid kicks.. Whatever you use the paint will still peel off the bottom...
Can u do a old school vans red bottom no glitter?
Yes I can! What color cans… black or white?
Can you do it with the paint brush only
You can indeed use a paint brush to paint the red bottom! I just feel like the airbrush is more efficient.
Very tough my guy 💯💪🏾
Thanks for the love! 💯
The Only Cool Lightskin Ik 😂🤝🏾🔥
Well, I hope you meet a lot more bro!
🤜🏽💥🤛🏾 One Love!
I gotta know how long the bottom stayed!!!! I been tryna paint mine foreverrrrrrr
It is still perfect. I used sole protectors. I did make another pair without the protectors, just to see how long it would last, and it came off after one day.
Where did you get your spinning turn table
Right here.
LAMXD 11”Rotate Turntable... www.amazon.com/dp/B09Y8QWDCY?ref=ppx_pop_mob_ap_share
a low playing instrumental is better suited for a learning environment, love what your doing tho, thx for the session
Feedback like this is great! Thank you! And thanks for watching! I’ll incorporate that into my next one!
New to the channel and here to support
Happy to have you here! 🤝🏽
What’s that called where you have the shoe spinning on the computer desk
It's called a levitating shoe display!
@@CustomFeens appreciate you man keep up the work 💥
Not a problem at all!
I seen some people paint the bottoms and immediately thought NO lol it does look dope but sucks when you're walking and it comes off. I wish they had paint for soles but nothing has come to light just yet. The only thing I can say to use to help even more are sole protectors. Other than that dope custom 💯
Check out the sole protector video!
ruclips.net/video/ltbDLb8GKiY/видео.html
Do u have to sand the shoe down? How do u know when u sanded too much or too little??
First, acetone the shoe to get the factory finish off. You don't have to sand the shoe but I sand the shoe because the sanding removes more paint and it creates abrasion on the surface of the shoe for the new paint to stick to. You can sand as long as you need to, just don't go overboard and damage the shoe. Once you start to see scuffs on the shoe you're most likely good to go in that spot. You've gone too far if you start to see leather peel. lol
@@CustomFeens great information .. thank you
@@Perfect_Tactical no problem at all! Good luck!
where i can find black glitter?😢
You can find the glitter on Amazon!
Whats the thing u used for the end of the laces? The tool u used?
It's called an "Aglet tool". It installs the metal lace tips for the shoe laces, or hoodie draw strings.
@@CustomFeens thank you
@@Perfect_Tactical you are very welcome!
What setting did you use for the grommet tool?
My grommet tool is on setting. It’s 3/16 of an inch. So first I used punch pliers to make the eyelet hole big enough, then, came back with the grommet tool to install the gold grommets.
thanks alot bro!!!!!
Yessir! No doubt! Hit that subscribe button for me bro! 🙏🏽
i like em
Thank you! Please share!
Do really need the 2hard paint ??
It’s recommended, I wouldn’t say it’s needed.
Sole protecter?
Yes! Definitely. I have a video for that! ruclips.net/video/ltbDLb8GKiY/видео.html
Check it out.
Which spray you are using??
Krylon Sealer. All links to everything I used to create the shoe is in the description of the video! 😃
cool 😎
Thank you so much!
Mine doesn’t look as sparkly 🥴
Hmmm… 🤔 What are you using to apply the glitter?
@@CustomFeens what glitter do you use ?
It’s called Torc. I left the links to everything I used to create the shoe down in the description! You can find it there! 😃
How durable is the glitter? Do you have a problem with glitter shedding and/or cracking?
It’s durable…for light walking…but I would do it a little different next time and only apply 1 or 2 layers. Overtime, when doing big city walking, I did get some cracking and flaking. The initial coat stayed perfect though, which lets me know that the extra costs aren’t really needed.
Thanks!!!
No prob at all. Thanks for the engagement. If you really like my videos, please SUBSCRIBE! We are trying to reach the BIG 1,000 SUBS! Lmk how your shoes turn out!
That spray must needed?
Yes. The sealer is needed.
Why not use angelus glitterlites?
Thank you for informing us about this. We will definitely look into it!
I just finished a custom with the angelus glitterlites, its not as prominent in glitter, but i think using it as the base instead of modge podge can work and tyen adding the glitter on top.
@@xXJosI2ockzXx this is definitely something we’ll be trying on the next one! Thank you
I use it as a base, then pour extra fine glitter on top. Glitterlites isn't as sparkling.
You did a great job but y'all doing to much. You making your work harder by sanding your sneakers. The sneakers don't have to be sand down but i do use acetone to take the factory finish coat off and thats all you have to do. Also, press your glitter into your glue. Take a paint brush to knock off or brush the excess glitter each time you put a layer of glitter. Once finished and glitter is dried, then take a toothbrush and brush off the excess glitter. Do not spray a sealer bc it takes away the shine or sparkling away. Just some tips to help you along the way.
Pj😊
I😮😮
😊😊
P😊
P he
M
Regular laces, oh the disrespect
No disrespect. Different laces for different places!
They red bottom is gonna fade.
Eventually, just like any other sneaker. The sole protector keeps the color a lot nicer longer
@@CustomFeens thank you.
No problem 🤝🏽
This video was hard to watch. No idea how to use an airbrush. And WHY IN THE HELL did you use a silicone sculpting tool to apply the mod podge?
The red is coming off 1st time you wear em.
Thanks for your comment. If you feel like you can do a better job the first time you make some, then feel free to make a video and show the world how. I used a silicone brush because at the time of making this video I didn’t have any bristle brushes on hand. Again, if you feel like you know how to yield an airbrush, make a video and show the world how with your expertise. Otherwise, 🤐. To this day, this is one of my most watched AND liked videos on my channel. Would I do a lot of things different a second time around? Yes. But that’s the whole point of learning and growing. Maybe you should try it. Any shoe that has a painted bottom will eventually wear off the first time you wear them…that’s why sole protectors were invented. Watch the next video and learn how to apply those. Nobody forced you to come to the channel and watch, but I appreciate the watch time hours you gave me. 😃
@CustomFeens lol. Guess you can't handle criticism. It's cool though. Keep up the dope work.homie.
I can handle constructive criticism. The community is about learning and building. I put out a video to help people. You didn’t like it. You came with energy that didn’t match the video or channel, asked questions and I still answered them. Your critique gave no value to me or anyone who read your comment. So to help my viewers I suggested that you show me how to yield an airbrush if I have no idea how to, I answered your question on why I used a sculpting tool, and educated you about Sole protectors to keep paint from wearing away and suggested you watch my video on that. Seems like a good response to your critique to me. Sounds like you need to be willing to accept the return of what you dish out if you’re going to be critical. 😃
@CustomFeens you soft homie. But good luck. Might want to learn before you teach. Showing people the wrong way doesn't help anyone. You are leading people to believe you can paint soles. No disclaimer.
@tat2dchad soft lol, coming from somebody who is calling me soft through a comment online. It’s a little more challenging face to face. Boy keep it moving. If you aren’t intelligent enough to know that paint will rub off the bottom of a shoe if you paint it that’s your problem. Lol. Scram.
Music is horrible. You should’ve did the video. I just talked all the way through it. Stella use that horrible music thumbs down bra and I’m from Detroit.
Yea, well if you’re from Detroit, do better. The only thing understandable about your comment is “Music is horrible”. Everything after that make absolutely no sense. And if you don’t like the music, make some, and maybe I’ll feature your trash ass music in one of my videos. The page and this video is about teaching how to customize shoes, not make music. You gave a thumbs down because of the music and not the value of the video. Stop hating, you’re a crab and it’s sad you are from Detroit.