Adventurebeatz I Taradale and Malmsbury Viaducts I Historic Railway Viaducts Victoria Australia

The Taradale Viaduct is a large wrought iron box girder bridge over Back Creek at Taradale, Victoria on the Bendigo Railway in Victoria Australia. It was erected as part of the Melbourne, Mount Alexander and Murray River Railway between 1858 and 1861, and was at the time one of the largest rail bridges built in Australia.
Construction of the Bendigo line commenced under the Melbourne, Mount Alexander and Murray River Railway Company in 1858, but this private consortium met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government in 1860 when it formed the Victorian Railways Department. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with the bridge designs completed by Bryson and O'Hara. The ironwork for the bridge was made by Rowland Brotherhood, of Chippenham, Wiltshire, under the supervision of British Railway engineer Isambard Kingdom Brunel. The foundation stone was laid by Mr. W. S. Urquhart Wednesday 25 September 1861
The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861.
Clarke appointed William O’Hara to design bridges and viaducts, while William Edward Bryson stated to the Select Committee of the Legislative Assembly on Railway Contracts that he had designed most of the large bridges on the line. Clarke clearly influenced the design of the railway in setting the standards for the line. However, this was also a very costly undertaking, which stretched the colonial finances and this approach was later abandoned for more economic light lines in later Australian Railways. William Edward Bryson was described as a Civil Engineer in 1857 when he was a member of the Philosophical Institute of Victoria. He was also a member of the Royal Society of Victoria 1859-60 and employed at the "Government Railway Office". He published "Resources of Victoria & their development" in 1860 in the Royal Society’s Transactions.
Introduction of heavier locomotives in the 20th century required strengthening of the bridge with steel trestles added between the original masonry piers in 1933-1934.
The bridge is included on the Victorian Heritage Register (VHR Number: H1595) and the National Trust Register.
Malmsbury Viaduct
The Malmsbury Viaduct is a large brick and stone masonry arch bridge over the Coliban River at Malmsbury on the Bendigo Railway in Victoria Australia. It was erected as part of the Melbourne, Mount Alexander and Murray River Railway between 1858 and 1861, and was at the time the largest masonry arch railway bridge built in Victoria.
Construction of the Bendigo line commenced under the Melbourne, Mount Alexander and Murray River Railway Company in 1858, but this private consortium met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government in 1860 when it formed the Victorian Railways Department.
The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861.
The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with the bridge designs completed by William Bryson CE, Head Draftsman, who was responsible for many of the large structures such including bridges and viaducts under the supervision of George Christian Darbyshire for the Victorian Railway. William O’Hara, Senior Draftsman with the railways department, also had experience in the design of masonry structures and so probably also contributed to the design of the viaduct.
The bridge is over 100m long with five 18.3 metre spans, standing about 25 metres high. 132,000 cubic feet of bluestone for the bridge was quarried at the east end of Malmsbury and carted to the site by horse and drays.
The foundation stone for the viaduct was laid on 25 October 1859 and the bridge was completed on 24 October 1860.
It was listed on the Victorian Heritage Register in May 2000.
A celebration of the 150th anniversary of this event was held in 2010 organised by the Malmsbury Historical Society.
Adventurebeatz
🏠 Join my travel and art community on Patreon / adventurebeatz
Where I share exclusive videos and extras not found on the channel. Thank you!
My website: www.adventurebeatz.com
#viaduct #railwaybridge #victoriaaustralia #trains #railwayhistory #trainspotting #trains #exploreaustralia #travelaustralia

[@user-hx8yp9gd8k]

Some fantastic railway bridges, thank you for that

[@Adventurebeatz]

Thank you, Glad you enjoyed.