hi, I download the iges file and import it into geometry. however, there are six parts rather than one body like you used, and the mesh cannot be completed, could you help me , thanks first
VERY GOOD video， and the frame seems is R-45. However, just cant understand why the inner surface of fork hole has a fixed support. I would like to say only the bottom of the fork holes has a fixed support.
These results look suspicious to me because your maximum values are VERY close to your applied load. Please explain why these results are accurate/not accurate.
My course teacher told me the following: How do I validate the results of the analysis that you have done in ansys?, and he suggested that I should be able to do it analytically, so he left me with that doubt because the emf method is very complicated to perform, for example, in matlab .
you need to save the solidwork geometry as .step then you can import to ansys, i have the same problem that doesn't admit a .SLDPRT to import, strange that he can do
Thanks a lot. This is very well explained.
hi, I download the iges file and import it into geometry. however, there are six parts rather than one body like you used, and the mesh cannot be completed, could you help me , thanks first
VERY GOOD video， and the frame seems is R-45. However, just cant understand why the inner surface of fork hole has a fixed support. I would like to say only the bottom of the fork holes has a fixed support.
How do you recommend I validate the results I have obtained?
how to know which faces to fix??
Can you please send the igs file for all your tutorials
You can download bicycle frame igs file from here:
drive.google.com/open?id=0B1subGSURJWQWmxhT09WSXNPVmc
PLEASE GIVE THE ACCES TO DOWNLOAD THE FILE
PLEASE GIVE THE ACCES TO DOWNLOAD THE FILE. PUBLIC PLEASE
Can you show me the ansys version you are using
These results look suspicious to me because your maximum values are VERY close to your applied load. Please explain why these results are accurate/not accurate.
My course teacher told me the following: How do I validate the results of the analysis that you have done in ansys?, and he suggested that I should be able to do it analytically, so he left me with that doubt because the emf method is very complicated to perform, for example, in matlab .
i have an issue respect doing mesh, the student license doesnt admit a mesh with that size and with that quality
Hey
Can you give access to the frame model?
hi please give me the access to download the ansys file
HOW TO IMPORT .SLDPRT DIRECTLY??
you need to save the solidwork geometry as .step then you can import to ansys, i have the same problem that doesn't admit a .SLDPRT to import, strange that he can do
NO any voice?Y?
I require the file immediately
Alumaniyum lol xD